AGATEC Self Leveling Rotating Laser 510

Special deals on 510GC Kombo kits with tripods

AGATEC 510 General Construction Layout & Interior Laser

The AGATEC 510 is a full-featured laser that offers high performance at an affordable price. It's electronic self-leveling in horizontal and vertical modes, and ideal for installing drop ceilings and drywall and for interior layout and renovations. The AGATEC 510 is also ideal for aligning and squaring tilt-up walls, partitions, decks and foundations.

Built-in, motorized mount
The PowerMount saves you time when changing from mold height to grid height, or clearing low-hanging obstacles - just use the remote to adjust the motorized mount! In vertical mode, move the laser back and forth with the remote for layout and partition installation. Provides 4" (10 cm) of adjustment, up to 100 (30 m) away.

Integrated slope mount
In manual mode, tilt the laser on its base (no separate grade mount needed) to match any two slope reference points from 1° to 90°. The laser's 10% manual grade lets you match slope manually in both axes, or in one axis with the security of cross axis self-leveling.

Other Features
• One-Touch leveling speeds setup.
• Square shot or chalk line can be adjusted left or right with the remote control, saving time when installing walls and partitions.
• H.I. warning prevents errors.
• Uses recharge kit (included) or runs an entire month on 2 flashlight batteries.
• Electronic field calibration saves trips to the repair shop.

Integrated Slope Mount Place the laser in manual mode and match any two slope reference points from 1° to 90°	Motorized PowerMount Operates by remote control. Great for "bucking in" between two points, or placing directly over a layout reference. Provides 4" (10cm) of adjustment, up to 100' (30m) away.

Mounting on seismic grids
For new 2" seismic grid (2006 code requirement) Kit 9-21100: Magnetic adapter bracket and standoff. An adapter kit is available to hang the AGATEC 510 from the new 2” seismic molding. With the adapter, the laser’s built-in wall mount can be magnetically and mechanically attached to either standard or shadow grid seismic molding. Can also be used with standard 1” grids.