AGATEC A710 Universal Self Leveling Rotating Laser
Detach the keypad, and it's a two-way RF remote control.
Four 360° rotation modes
cover 1,000 ft.
|
AGATEC A710 Universal Laser GC Package
| 11-0349 |
Self Leveling Horizontal, Vertical, Perpendicular, and Dual Slope Laser GC Package
|
$3099.00 |
|
| AGATEC A710 GC Package Includes: |
| 1-16574 |
A710 Instrument |
$2728.75 |
|
| 1-16575 |
12V Charger / Cord |
$45.00 |
|
| 1-08931 |
SR200 Detector & Clamp |
$159.25 |
|
| 1-16576 |
Carrying Case |
$113.75 |
|
AGATEC A710 Site Display & Pipe Laser Package
| 11-0340 |
Self Leveling Horizontal, Vertical, Perpendicular, and Dual Slope Laser Site Display & Pipe Package
|
$3326.50 |
|
| AGATEC A710 Site Display & Pipe Laser Package Includes: |
| 1-16574 |
A710 Instrument |
$2728.75 |
|
| 1-16575 |
12V Charger / Cord |
$45.00 |
|
| 1-16281 |
MR240 Receiver |
$539.00 |
|
| 1-16403 |
CM200 Pipe Target 6" to 12" |
$45.50 |
|
| 1-16576 |
Carrying Case |
$113.75 |
|
Special deals on Agatec A710 Kombo kits with tripods AGATEC A710 Dual Grade General Construction Layout Laser
Ideal for site prep and short-run pipe laying
The AGATEC A710 automatic dual grade laser is the most versatile laser on the market today, designed to work anywhere, on any job site. With the AGATEC A710 Laser Level, the accuracy and time-savings of machine control are now within reach of
even small excavators. It's easy to set precise grades for single and dual slope grade control with the A710. Completely automatic, there’s no need for compound slope adapters with complicated charts. the A710 has six rotation settings, including the
faster speeds needed for machine control receivers. This laser is so versatile, you can even use it for sewer connections, such as pipe leads, or any runs up to 100 ft., and grades up to 10%. The handle is detachable, allowing the laser to be used in
6" pipes.
Features
• Single or dual slope grade control (± 10%)
• Electronic, motorized leveling in horizontal and vertical
• Two-way remote control keypad
• LCD on keypad displays laser functions and status
• Automatic and manual modes
• Electronic left and right adjustable beam for layout or pipe laying
• Visible beam
• Adjustable scanning
• H.I. Alert
• Electronic calibration with remote control
• Waterproof
• Rugged metal construction
One laser…multi uses
•Site Work and Leveling- The A710 is ideal for checking elevations, forms, digging footings, checking foundations, screeding concrete, and much more.
•Alignment and Layout- Completely self-leveling. Fully automatic in vertical mode, the A710 can be used to install and align tilt-up walls, partitions, and window and door frames. Use it for squaring
walls, decks, foundations and other layout jobs.
•Machine Layout- With the A710, the accuracy and time-savings of machine control are now within reach of even small excavators. It’s easy to set precise grades for single and dual slope grade control
with the A710.
•Interior- The A710 has the features you need for interior jobs as well - adjustable scanning and a constant square shot that’s left and right adjustable for partition installation. Acoustical
ceilings, wall and floor tile, cabinets and countertops - all easily install with the A710.
Specifications:
| Recommended use: |
1,000' (300 m) |
| Accuracy: |
±1/8" at 100 ft /3mm at 30m
(±0.010% or 20 arc sec) at 0% grade;
(±0.015% or 30 arc sec on grade) |
| Leveling Range : |
±10%; ± 5.7 ° |
| Automatic grade range: |
-10% to +10% in X, Y and Z in increments of 0.001% |
| Laser beam: |
635nm, visible, <5mW
IEC/CDRH: Class 3R
Split for leveling, plumb/squaring |
| Rotation speeds: |
0-60-150-300-450-600-700 rpm |
| Scanning: |
Choice of 3 lengths |
| Communication (with keypad) |
Infrared or radio frequency |
| Laser battery life: |
NiMh rechargeable; 40 hrs |
| Environmental: |
Laser is waterproof: IP67; Nitrogen purged
Remote is weather-resistant |
| Tripod mount: |
Standard 5/8-11 |
| Size: |
5" x 4.5" x 8.5" w/out handle;
7 lbs. (12.5x11.5x22cm; 3.2 kg) |
|
AGATEC
Tripod
AGATEC
Accessories
