AGATEC Laser Level Accessories

AGATEC RCR500 Detector / Remote & Clamp

1-16283

RCR500 Detector/Remote & Clamp

$219.50

RCR500 has magnetic attachment for ceilings and metal studs, and integrated level vial. When used with the AGATEC 510 or AGATEC LT300 lasers, detector also functions as a remote to control scanning, rotation, and electronic calibration and to move the square shot or the 510's motorized PowerMount. The AGATEC RCR500 Detector / Remote can also be used to quickly level up the AGATEC 220HV in vertical.

Features: Front and back Hi-Level-Lo displays get you on grade wherever the laser is positioned. Audible tones tell you the beam location without watching the display. Selectable accuracy of ± 1/16" (2 mm) for fine work or ± 1/8" (4 mm) for standard.
Includes rod bracket.

AGATEC SR200 Detector and Clamp

1-08931

SR200 Detector & Clamp

$183.75

Features: Front and back Hi-Level-Lo displays get you on grade wherever the laser is positioned. Audible tones tell you the beam location without watching the display. Selectable accuracy of ± 1/16" (2 mm) for fine work or ± 1/8" (4 mm) for standard. Works with any rotating laser. Includes rod bracket.

AGATEC LS-56 Interior Detector

1-08911

LS-56 Interior Detector

$157.50

The AGATEC LS-56 detector acts as an "electronic target" with bright LEDs (red for High and Low; green for On-Grade). Includes magnet on top for attaching to grids and safety lanyard for drop protection.

AGATEC Remote Controls

1-16172	TL25 Remote Control	$73.50
1-15501	TL15 Remote Control	$49.00

TL25 remote control for the AGATEC 510, AGATEC 220HV and AGATEC LT300 Laser Levels.
TL15 remote for with the AGATEC M10 Manual Laser.

AGATEC Kombo Aluminum Tripods

1-16251	Tripod w/13 ft. quick-attach rod in inches, plus carrying bag	$146.25
1-16250	Tripod w/13 ft. quick-attach rod in tenths, plus carrying bag	$146.25
1-16404	Tripod w/3.9m quick-attach rod in metric, plus carrying bag	$146.25

With the Kombo, the rod is clipped securely to the tripod, keeping it clean. You don't have to worry about mud or dirt getting inside the rod sections, which can scratch and damage the rod face. A top hinged clip and lower compartment hold the rod in place. The pieces are easily removable from the tripod leg if needed. The carrying bag also protects the tripod and rod from scrapes and scuffs during transport.

AGATEC Elevating Column Tripods

1-16266	9 FT Elevating, Heavy-duty. Includes reversible foot kit with points & rubber pads.	$287.75
1-16272	12 FT Elevating, Premium with Rubber Feet	$438.75
1-16311	12 FT Elevating, Premium with pointed Feet	$512.00

1-16266: Legs extend 50" to 73" (127-185 cm), Column extends additional 33" (84 cm), Total height: 9 ft, Weight: 17 lbs (7.7 kg), Quick clamp aluminum extension legs, Safety chains on legs prevent slipping on hard surfaces. Adjustable 33" center column has rack and pinion lift and incremental column markings. 5/8-11

1-16272 & 1-16311: Legs extend 4-11 ft (1.2-3.4 m), Column extends additional 10" (25 cm), Total height: 12 ft, Weight: 23 lbs (10.4 kg), For large interior jobs and other extra-height applications, Adjustable center support keeps legs from slipping. Each tri-brace section locks to secure leg at any angle. Anodized aluminum heavy-duty construction. Built-in circular leveling vial.

AGATEC 13.5' Maxi Machine Tripod

1-08813	13.5 Ft. Maxi Machine Control Elevating	$1176.00
1-16269	Tripod stabilizer	$36.75

Ideal for machine control applications. Offers a stable mount for laser transmitters in wind and other adverse conditions, even when fully extended. Legs extend 6 ft to 13.5 ft (1.8-4.1 m). Weight: 29 lbs (13 kg). Extremely rugged: supports up to 75 lbs. Sturdy, shock-resistant aluminum construction; upper leg section is 2" diameter, Adjustable 18" center column. Self-locking worm gear mechanism with folding crank provides smooth "no-drift" height adjustment of any load 5/8-11 removable mounting head Heavy-duty pointed feet.

AGATEC Value Series Tripod

1-16198

Value Series Aluminum Tripod, Flat Head

$73.25

5/8-11 mounting stud. Shoulder carrying strap. Double-banded extension legs for extra stability. International orange hardware for job site visibility, 38" to 62" (97-157 cm), Quick clamp, 9 lbs (4 kg).

AGATEC Value Series Tripod

1-16265

Value Series Aluminum Tripod, Dome Head

$73.25

5/8-11 mounting stud. Shoulder carrying strap. Double-banded extension legs for extra stability. International orange hardware for job site visibility. 40" to 65" (102-165 cm), Quick clamp, 9 lbs (4 kg).

AGATEC Value Series Tripod

1-16267

Heavy-Duty Aluminum, Flat Head

$131.75

5/8-11 mounting stud. Shoulder carrying strap. Double-banded extension legs for extra stability. International orange hardware for job site visibility. Extends to 66" (168 cm). Quick clamp. 14 lbs (6.3 kg).

AGATEC Value Series Tripod

1-16268

Wood dual clamps, Flat Head

$170.75

5/8-11 mounting stud. Shoulder carrying strap. Double-banded extension legs for extra stability. International orange hardware for job site visibility. 45" to 72" (114-183 cm). Dual clamps for fast, stable setups. Quick release clamps lock fast; wing nut, twist clamps prevent slipping. 16 lbs (7.2 kg)

AGATEC Value Series Tripod

1-16270

Wood/Fiberglass dual clamps, Flat Head

$190.25

5/8-11 mounting stud. Shoulder carrying strap. Double-banded extension legs for extra stability. International orange hardware for job site visibility. 45" to 72" (114-183 cm). Dual clamps for fast, stable setups. Quick release clamps lock fast; wing nut twist clamps prevent slipping. Hardwood legs painted international, yellow, with fiberglass dowels. 17 lbs (7.4 kg)

AGATEC Value Series Tripod

1-16271

Fiberglass premium dual clamps, Flat Head

$243.75

5/8-11 mounting stud. Shoulder carrying strap. Double-banded extension legs for extra stability. International orange hardware for job site visibility. 45" to 72" (114-183 cm). This all-fiberglass heavy-duty model is ideal for lasers, optical instruments, total stations, robotics, and GPS equipment. Dual clamps for fast, stable setups. Quick release clamps lock fast; wing nut twist clamps prevent slipping. Waterproof to withstand long setups in wet conditions. Tripod cap holds a combination tool that fits all bolts on tripod. 18 lbs (8 kg)

AGATEC 25' Fiberglass Grade Rod

1-16580

25 ft. Rectangular-Oval Grade Rod - Fiberglass, Tenths

$224.75

This rectangular-oval rod is extremely durable. It has flat front and back surfaces with round sides, and reinforcing ribs that resist breakage and add stability. It's ideal for pipe laying applications, or doing one setup for differing elevations. 5 sections; close to 5' 6".

AGATEC 16' Fiberglass Grade Rods

1-08884	16 ft. Rectagle Grade Rod - Fiberglass, Tenths	$92.00
1-08896	16 ft. Rectagle Grade Rod - Fiberglass, Inches	$92.00

These strong fiberglass rods from Crain are waterproof, corrosion-resistant, and non-conductive. Tight and accurate, the sections lock securely with unbreakable buttons. Designed to resist jamming from sand or dirt. Includes measuring scale on the back to determine overall height. 4 sections; close to 4' 9".

AGATEC 16' Aluminum Grade Rods

1-16185	Aluminum Rod 16 ft. in Inches	$52.50
1-16184	Aluminum Rod 16 ft. in Tenths	$52.50

Telescoping leveling rods made of a light and durable alloy; silk-screened with moisture resistant inks. 5 sections; closes to 4 ft.

AGATEC 5m Aluminum Grade Rod

1-16186

Aluminum Rod 5 meters "E" face (metric)

$63.00

Telescoping leveling rods made of a light and durable alloy; silk-screened with moisture resistant inks. Graduations on front side: cm; back side: mm

AGATEC Direct Reading Laser Rods

1-17030	Direct read Cut and Fill Rod 10 ft. (Tenths)	$194.25
1-17031	Large Scale Direct read (Tenths)	$194.25
1-17075	Detector Bracket for above laser rods	$68.25
1-17032	Direct read for Optical instruments (tenths)	$173.25

These Lenker-style rods read grade in true elevation. This eliminates errors caused by adding or subtracting numbers each time a shot is taken. The LaserLine rods are rugged, yet lightweight, made from high-strength anodized aluminum. Dupont nylon parts are the same material used in ski bindings and motorcycle parts. The tape face has a matte finish with yellow background, making it easy to see in both bright sunlight and low light. Optional carrying bag available. Include slide rail for fastening optional laser detector bracket. Specify your detector model when ordering the bracket option. With model 1-17030 it's like having two rods in one: read true elevation on left side of tape; cut-and-fill on right side.

Direct Reading Optical Rod
Designed for use with optical instruments, this Lenker-style rod reads grade in true elevation. This eliminates errors caused by adding or subtracting numbers each time a shot is taken. Read true elevation in large scale; for use with optical instruments.

AGATEC Precision Level Layout Kit

1-17010

Precision Level with Laser and Layout Accessories

$555.50

This Laser Tools compact level with built-in laser provides a simple solution for general construction tasks. Includes a 5 minute of arc level vial and 12.5 mm optics for visibility in direct sunlight. Accuracy of 1/8" at 100 ft.

Inlcudest: Laser level, case, and layout accessories, including 90° degree Beam Bender and LaserChalk Line.

AGATEC Wall Mount for LT300 & 220HV

1-15502

SM200 Wall Mount for LT300 & 220HV

$131.25

Use as wall mount for AGATEC 220HV and LT300 or to set lasers in vertical mode on a tripod. Spring-activated mechanism for height changes and quick setups; fine adjustment screw for precise positioning.

AGATEC Magnetic Target

1-15506

Magnetic Target for Ceilings & Metal Studs

$10.50

Graduations in inches, centimeters.

AGATEC Vertical Alignment Target

9-09279

Vertical Alignment Target

$142.50

Vertical Alignment Target for aligning to a second pont for interior wall set-up. Self plumbing.

AGATEC Beam Enhancing Glasses

1-16201

Beam Enhancing Glasses

$5.25

Improve the visibility of the laser beam in bright light conditions.

AGATEC Receiving Clamp

1-08933

Receiving Clamp

$21.00