CST/Berger Lasermark LMH Models Feature:
- Motorized, Electronic Self-Leveling for Speed and Convenience
- Anti-Drift Feature Signals Operator When Unit is Moved Out of Position; Helps Prevent
Error
- Easy-To-Use, Built For All-Weather General Construction Needs
High-end laser performance is now available at a fraction of the cost! The
CST/Berger LaserMark® LMH Automatic Self Leveling Rotary Lasers offer fast and simple leveling
power to handle your toughest outdoor jobs with less manpower.
Each Lasermark LMH unit levels itself via electronic sensors interfaced with motors, eliminating
the need for re leveling or rechecks. No more fussing with manual leveling screws or bubbles; just
turn it on and you are ready for work! Plus, the built-in ADS (Anti-Drift Sensor) provides peace of
mind when working on a busy job site; if the laser's H.I. ("height of instrument") is
altered due to tripod movement or an accidental bump, the operator is instantly alerted.
Choice of Four New Units lets you select the features you need at the price you can afford. The
three units on this page have all been optimized for accurate exterior work at the lowest possible
price. All three are water and dust proof, single beam, fully electronic servo motor-driven
horizontal self leveling.
The CST/Berger Lasermark
LMH-600 has a page of its own: it features Horizontal or Vertical Self Levelling, Dual
Beams, Variable Speed Rotation for Interior or Exterior work, Sweep Mode to optimize interior
brightness, and Dual Axis Grade capability.
 |
 |
Grading and machine control using laser detector or depth
sensor
|
Leveling of masonry walls, as well as various types of fencing
or partitions |
 |
 |
| Checking depth or creating drainage for foundations, trenches,
septic fields |
Checking level or grade for pool installation as well as other
excavation work |
|
 |
| A tripod settling in soft dirt puts you at risk for inaccurate
readings; when Anti-Drift is on, the LMH clearly alerts you when it detects any vertical
movement. |
|
| |
Specifications of the CST/Berger Lasermark LMH Automatic
Self Leveling Rotary Laser:
| Accuracy: |
3/32" @ 100 feet
(2.4mm @ 30m) |
| Self-Leveling Range: |
±3° |
| Laser Diode: |
Visible 650nm red |
| Manual Grade (Single Axis): |
No |
| Detector Included: |
LD400 |
| Recommended Working Range: |
Up to 2000 foot (610m) diameter with laser
detector |
| Self-Leveling Speed: |
1°/4 sec. (approx.) |
| Rotation Speed: |
600 RPM |
| Indicator Lights: |
LED power, low battery, and Anti-Drift System |
| Dimensions: |
8"H x 6-1/4"W x 6-3/8"D (203mm x
159mm x 162mm) |
| Weight: |
5.5 lbs. (2.5kg) with batteries |
| Power: |
Four "D" cell Alkaline batteries
provide ±75 hours of intermittent use (varies with temperature) |
| Tripod Mounting: |
Standard 5/8" x 11 mounting thread fits flat head tripods |
| Operating Temperature: |
22° F to 120° F (-6° C to 49°
C) |
| Warranty: |
Two year warranty |
All CST/Berger Lasermark LMH Automatic Self Leveling Rotary
Laser's include:
Hard shell carrying case, Detector, heavy duty rod clamp, batteries and instruction manual |
|
 |
| LD-500 |
Universal Laser Receiver
with Rod Clamp |
$504.00 |
|
LD-500 Laser Receiver is both a machine-mounted and survey rod receiver. Designed for all rotating
lasers. It is ideal for backhoes, excavators, dozers, skid steers, and box blades.
Features of the LD-500 Universal Laser Receiver:
- 5" laser capture height
- 240° angular reception for maximum laser visibility
- A bright LED red grape lights for easy viewing
- LCD display and adjustable volume control for rod use
- Heavy-duty rod clamp
- Rugged Lexan housing for the harshest environments
- Secure magnetic mounting to heavy equipment
- Strobe light rejection
|
|
 |
| 57-LD100N |
Laser Detector
with Rod Clamp
|
$147.00 |
|
The large beam capture window (2-1/2"/64mm) allows easy detection of beam. ON/OFF, Audio
ON/OFF, and Beam Resolution controls are mounted on a pressure sensitive key pad with LED level,
out-of-level, and mode indicators. Auto shut off. For use with LaserMark rotary lasers. |
|
 |
| 57-LD120 |
Laser Detector
with Rod Clamp |
$164.00 |
|
Locate your laser beam in bright light or over long distances. This laser detector can be used with
any rotating visible or invisible laser on the market, including Topcon, Spectra-Precision, Laser
Alignment, and others. The LD120 features front and back LCD displays, power on/off, audio on/off
and beam resolution controls. Includes standard rod clamp.
Features of the Laser Detector with Rod Clamp:
- Rugged, gasket sealed case for waterproof protection (IP-6)
- Memory feature preserves last position of beam if the unit is moved out of the plane of
light
- Three distinct tones (high, on-grade, and low) assist targeting from a distance
- Built-in filtering for bright sunlight and electromagnetic interference
- Auto shut-off after six minutes of inactivity saves batteries
- One 9-Volt battery provides up to 3 months of normal use
- One Year Warranty
|
|
 |
| 57-LD400 |
Universal Laser Detector w/ Rod Clamp
(Included with LMH & LMG-GR) |
$180.00 |
|
The LaserMark LD-400 Universal Laser Detector features front and back LCD
displays, three levels of beam resolution (fine, medium, and coarse), and four levels of speaker
volume (off, low, medium, and high). Includes heavy duty rod clamp. |
The new LD400 features seven channels of information indicating the position of the
detector in the plane of laser light. |
| Speaker Volume |
Off/Low/Medium/High |
| Sensitivity |
Fine/Medium/Coarse |
| LCD Display |
Front & Back |
| Rod Clamp |
Heavy Duty |
| Display Channels |
Seven Channels |
|
|
 |
| 60-ALQC20 |
Contractors Tripod with Quick Clamps
(Made in U.S.A.) |
Sale!
$81.75 |
|
| 60-ALQCI20 |
Contractors Tripod with Quick Clamps
(Made in India) |
Sale!
$46.50 |
|
Lightweight and durable aluminum hinge, clamp, and shoe casings. Hinges are attached with screws,
not rivets. Heavy duty poly webbing shoulder strap. Electrostatically powder painted castings for a
durable and long lasting finish. 63" open - 38" closed. 5/8"- 11 thread. Flat head.
Wt.: 9lb. |
|
 |
| 60-ELC20 |
Universal Elevator Column
5/8" x 11 thread, 4 lbs. |
$156.00 |
|
The Universal elevator Column is a must for interior laser levels and automatic levels. As the name
suggests, this elevator column will fit any 5/8" x 11 tripod on the market. Just screw
the elevator column, like any instrument, onto the tripod head. The adjustable column has a height
adjustment range of 4" (100mm). The top plate is rotatable. |
|
 |
| 57-CMOUNT |
Ceiling/Wall Mount |
$53.00 |
|
This ceiling/wall mount aids in the installation of drop ceilings, remodeling, and more! Features
5/8"x11 mounting thread, inch/cm graduations, and durable construction.
| 57-VMOUNT |
Vertical Mount |
$68.75 |
|
Identical to CMOUNT, but has additional 5/8"x11 mounting thread on back that allows use of
laser to generate VERTICAL lines. |
|
 |
| 06-808C |
Sighting Rod |
$34.75 |
|
Eight foot, three section sighting rod. Marked in Feet, Inches, and 8ths. |
|
 |
| 57-TARGET |
Grid Target with Magnetic Base |
$15.00 |
|
Features a magnetic base for attachment to metal studs or drop ceiling t-bars, and inch/cm
graduations. |
|
 |
| 57-GLASSES |
Laser Glasses |
$10.00 |
|
Improves visibility of red laser beams. |
CST/Berger Index 
View Cart
|
FAX Order |
Tell
a Friend | Contact Us 
