Over 40,000 Hand and Power Tools.
|
Quality Tools at Discount Prices
Over 40,000 Hand and Power Tools. |
|
|
 |
Ph: 800-347-5096 Hours: M-F 6:30a - 4:30p (Pacific) | View Cart |
 |
 |
Home  Checkpoint Laser
Accessories Checkpoint Laser Level Accessories |
 |
880 Square Laser Level Accessories(Part 1 - Bases & Cases, Slope Pins and Tripod) |
| Magnetic Bases | |
Features
|
Checkpoint's Mag Base System
Mag Base
* Stubby and Magnum Bases Only Each is interchangeable with any Checkpoint 880 and 770 products and comes in a clear reusable heavy wall tubing case with industrial tough vinyl end-caps that offer the maximum re-usable product protection. Review each specific description below to select its use and function to best fit your applications. |
Checkpoint Stubby Mag BaseThe Checkpoint Stubby Mag Base is designed to be kept on the instrument "full-time" highlighting a strong compact configuration, super strong mag-ratio, and layout versatility in both US and MM. This super high performing compact 9" x 1" version uses four neodymium rare-earth magnets, has Imperial (U.S.) and metric scales laser engraved for layout aid, V-groove ends for centering, 1/4 20 tripod tapped hole for versatility, two counter-bored holes for permanent mounting on repeatable slide in slide out applications for all the 600 and 880 series laser levels. Fully machined and anodized, this quick handling super strong compact also accommodates the Slope Pin System to set exact slope and grade positive or negative. |
 309 - Magnum Stubbyc Base — Will not fit the EV600 Series Special Edition Laser Levels |
||||||||
|
|||||||||
| THE SLOPE PINS — attach under either end of the base as indicated on the base sides and are held in place by the neodymium magnets centered on the flat side. They give exact slopes or grades with no calculation depending on your choice of slope pin size. Slope Pins are sold either individually or in sets of seven pieces, and come in 1/16” increments (starting with 1/8” slope). Again, each will work with all new Mag Bases and the 3D DMS series. | |||||||||
Magnum Mag BaseThe Magnum Mag Base is designed to be a super fast and versatile layout aid at an even 12 x 1 inches long including a variable slope/pitch "Jack Screw System." It features five neodymium rare-earth magnets for a superior magnetic ratio, is laser engraved with a 12 inch @ 1/8 Imperial scale (U.S.) and will uniquely accommodate the 880 SQUARE series when attached. The patented Jack Screw System allows one to project any intermittent slope or grade with the laser by simple thumb wheel adjustment - or use the same seven piece Slope Pin Set for exact projections of slope/grade as the Stubby base. Centering notches at each end, fully machined and anodized finish also compliment the Magnum series. Great care in the small unseen components such as spring washers and solid brass parts make the feel and function the professional's choice. |
 312 - Magnum Magnetic Base — Will not fit the EV600 Series Special Edition Laser Levels |
||||||||
|
|||||||||
Super-Vee Mag BaseThe Super-Vee Mag Base is specifically designed to be used with the 600 and 880 Pro Series Laser Levels. The Super-Vee Mag Base is machined from 6061 T6 Billet Aluminum, aircraft anodized and finished with permanently laser engraved graphics. Designed for unsurpassed holding power, we have installed 6 rare earth neodymium magnets that allows the Super-Vee Mag Base to hold 30 times its weight and it’s only 8 1/2" long. The V-Groove is integrated with radius ends and corners that allow flush alignments to radius bends and/or corners and self aligns perpendicularly to any pipe utilizing a special designed "Vee-Notch" at the center of the base 90-degrees to the main 135-degree V-groove. The Super-Vee Mag Base is a development accessory derived from the demand of electricians, pipe fitters and fabricators in the professional trades sector. |
 308 - Super-Vee Magnetic Base — Will not fit the EV600 Series Special Edition Laser Levels |
||||||||
|
|||||||||
Slope PinsSlope Pins are machined steel calibrated pins designed to project exact slope or grade with no calculation. The set comes in a seven piece molded vinyl case, each attaches under either end of the Mag Base series independently using the neodymium rare-earth magnets (located under the + or - locator marks) to project the exact positive or negative slope/grade selected depending on pin size. 7 Slope Pins per set (1/8", 3/16", 1/4", 5/16", 3/8" 7/16" and 1/2") with case and attached lanyard. The Slope Pin Kit fits Stubby and Magnum series Mag Bases. |
 |
||||||||
|
|||||||||
| Rotary Bases | |||||||||
Checkpoint's R2 Series Rotary Base Systemis an extreme delivery in quality and function. The R2s each have fully machined components including adjustable legs (with interchangeable brass and rubber tips), mainframes and a precision bearing rotary dial plate. Each includes a bull's-eye vial system allowing precision leveling from any given surface, a protractor dial for degree layouts, built-in thumbscrew brake and tension system for micrometer type adjustments. Each is precision machined, anodized and permanently laser engraved, and designed to accommodate the 880 and 770 series laser tools for full line integration. Here again the unseen attention to components like precision stainless steel bearing o-ring fitments and tensioning, proper machined shoulder bolts and specialty lubricants makeR2-D2is a double plate Rotary Base designed to be used on any surface application |
 |
||||||||
|
|||||||||
Tripod AdapterMale 1/4 In. thread fits all 880 and 770 lasers. Female 5/8 Inch x 11 thread fits regular construction tripods. |
 |
||||||||
|
|||||||||
| Cases - While Quantities Last! |
 |
880 Mag Armor Case880 Mag Armor Case is a professional trade model designed to fit any 880 series torpedo level with either Mag Base attached (Stubby or Magnum). This heavy duty holster fits 2" - 6" tradesman type tool belts and is constructed of black, double layered ballistic nylon with laminated high density foam. It is heavy-duty double stitched for extra durability and fitted with a special Velcro and belt-loop locking system for optimum sizing options. Full-time durability for the full-time professional tradesman.
|
||||||||
 |
880 Presentation CaseThe 880 Presentation Case provides a distinctive residence for the 880 series laser levels. This case has a steel shell with elegant and rugged leather-like exterior, vacuum formed and lined interior to accommodate an individual 880 series unit. Screened logo and graphics make this the perfect display unit for your professional series 880, 880 Gen II or 880 Square.
|
||||||||
 |
Back to Checkpoint Index |
 |
Home Page: CST Berger, Starrett, PLS Lasers, etc. |
 |
 |
Homepage |
Tool Search |
View Cart
|
FAX Order |
Tell
a Friend | Contact Us |
 |
|
|