Christie Battery Chargers

Charging System Tools

10 amp Dual Charger for Sulfated Batteries

Recover batteries with partial sulfation due to seasonal use or discharge during long storage periods. Electronic controls automatically adjust charging voltage (up to 22 volts) during de-sulfation mode. Designed for small lead-acid and gel cell batteries, the C1012/2S charges two batteries simultaneously and independently at 12 volts. Simply connect, set charger rate (0-10 amps) and set timer control (0-2 hrs)

• Two units in one cabinet
• 20 volt Initial Charging Voltage
• Adjusts to Constant Current control once sulfation is overcome
• 12 volts
• Automatic Reverse Polarity Protection
• 2 hour timer control
• Adjustable from 0 to 15 amps

10 amp Multiple Charger for Small Batteries

Designed for small lead-acid and gel cell batteries, the C10612 will charge ten batteries simultaneously at 6 or 12 volts. Equally effective in charging a single battery. Easy to use with no controls to adjust, simply connect batteries to charger and turn it on. Includes 10 clip sets.

• Automatic Current Regulation
• Solid State Circuitry
• Positive Polarity Protection

Wall Mount 4 Battery Charging System

The MCC 4X15 is four chargers in one. Built to be wall-mounted above a charging table or bench without the need for a separate charge bar.
Computer controlled electronics provide constant current charging at 15 amps to minimize charging time. Each charger is served by separate, automatic micro-processor controls which (a) regulate current and voltage, (b) provide time control, and (c) automatically sense full state of charge for shut-off.

• Better Than Parallel
• Uninterupted Continous Service
• Reverse Polarity Protection
• Independant Charging

6 or 12 Amp Series Multiple Charger

Christie's C 690 and C 1290 Series Battery Chargers are heavy duty continuous rated battery shop equipment for series charging applications. Chargers provide 90 volts finish charge voltage for 36 cells. (six 12 volt batteries). Industrial duty transformer construction and rectifier diodes give these chargers long life and rugged reliability needed for continuous duty in busy shops.

• Output Current for 36 Cells
• Circuit Protection
• Rate Control Adjustments
• Dual Voltage Transformer

Ten Battery Parallel Charging Rack by Christie is a stand-alone charging rack. Features vinyl coated shelves and heavy duty 40 amp color-coded clamps and cables for 10 batteries.

25 amp Multi-Voltage Marine/Industrial Charger

Versatile charger for use with 12, 24, 32 and 36 volts lead acid batteries. Continuous duty charging capacity of 25 amps with timer control for rugged and flexible professional service. Heavy duty industrial construction means long life and performance in a variety of marine and industrial applications. The C 2536 D is available for 230 volt ac service (C2536D-2).

• Multiple Charging Voltages
• Variable Charging Rate
• Timer Control
• Heavy Duty Construction

Multi-Tech Diagnostic Pulse Charger

The MTC20612 properly charges Conventional, AGM, Gel Cell and Deep Cycle 6 and 12 Volt batteries. Fully automatic, it charges the battery using a 20 amp constant current bulk charging phase limited to the constant voltage level appropriate for the battery type. It then shifts to a pulse technique to complete the charge cycle.

• Charges 6 or 12 Volt batteries
• Fully automatic operation
• Properly charges Conventional, AGM, Gel Cell and Deep Cycle batteries
• 20 fast charge rate reduces charging time for large batteries
• Simple, smart operation
• 1-Year Limited Warranty