Compare Angle Grinders - Angle Grinder Comparison and Review


Makita 9554NB 4-1/2 Inch Angle Grinder	6.0 Amp Motor Small circumference barrel grip (only 2.5") for added comfort Protective zig-zig varnish seals motor from contaminants Labyrinth construction seals and protects the motor and bearings All ball bearing design and metal gear housing for durability Rotatable gear housing rotates 90° for cutting applications	$57.00
DeWalt D28110 4-1/2 Inch Small Angle Grinder	7.0 Amp AC/DC Max Watts Out 800 W - No Load Speed 11,000 rpm Use Wheels RPM Above 12,000 rpm Spindle Lock Yes - Spindle Thread 5/8"-11 Tool Length 10 3/4" - Tool Weight 4.1 lbs Low profile jam-pot gear case increases durability and allows tool to fit into tight spaces 2-position removable side handle provides increased comfort and control Slim, ergonomic body design provides increased comfort in extended use applications	$62.25
Makita 9557PB 4-1/2 Inch Angle Grinder with extra large Paddle Switch	7.5 AMP motor design for high output power in a more compact tool (only 3.5 lbs.) Protective zig-zig varnish seals motor from contaminants Labyrinth construction seals and protects the motor and bearings 11,000 RPM Small circumference barrel grip (only 2.5") for added comfort Rotatable gear housing rotates 90° for cutting applications AC/DC switch for use with alternative power sources Extra large paddle switch for easy operation	$75.25
Bosch 1375A 4-1/2 Inch Angle Grinder	6 Amps, 11,000 RPM Lock-on/off switch for extended use applications Service Minder brushes eliminates guesswork, stops the tool when preventative maintenance is required Epoxy coated field windings provides ultimate protection against abrasive dust and metal debris 5/8" -11 Spindle wide flexibility for mounting most popular accessories Spindle lock for quick wheel changes Double Insulated, UL listed, complies to OSHA 2-Position auxiliary handle specifically designed and angled to a "natural" position for maximum comfort and control	$76.75
Milwaukee 6140-30 4 1/2 - 5 Inch Angle Grinder with Paddle Switch Lock-On	7.5 Amp, 825 MWO Motor-overload protection and power for daily applications 25% Longer Lasting Epoxy Protection-extends motor life by protecting the copper wire from abrasion X-Large Paddle Switch-increased comfort and ease-of-use when operating in various positions Tool Free, Burst Resistant Guard- the only grinder in its class with a tool free guard Multi-Port Exhaust-reduces motor burn-up by efficiently venting hot air out of the grinder Kit Includes: Side Handle, 4-1/2" & 5" Type 27 Guard, Spanner Wrench, Flanges - Double Insulated	$79.00
Bosch 1347A 4-1/2 Inch Angle Grinder	6 Amps, 11,000 RPM Lock-on/off switch for extended use applications Service Minder brushes Eliminates guesswork, stops the tool when preventative maintenance is required Precision spiral bevel gears Quality engineering and construction for smooth power transmission 5/8" -11 Spindle For quick wheel changes Spindle lock Wide flexibility for mounting most popular accessories 2-Position auxiliary handle Double Insulated, UL listed, complies to OSHA	$82.25
Makita 9558PB 5 Inch Angle Grinder with extra large Paddle Switch	7.5 AMP motor design for high output power in a more compact tool (only 3.5 lbs.) Labyrinth construction seals and protects the motor and bearings from dust and debris by creating a complex set of channels Rotatable gear housing rotates 90° for cutting applications Small circumference barrel grip (only 2.5") for added comfort No load RPM 11,000 Extra Large Paddle Switch for Easy Operation	$90.25
Bosch 1810PS 4-1/2 In. Paddle Switch Grinder	Amperage 8.0 No Load RPM 11,000 Wheel Diameter 4-1/2 In. Spindle Thread 5/8 In.-11 In. Length 11-1/4 In. Weight (lbs.) 4.3 Max. Motor HP 1.1 Rating 120V AC/DC	$89.00
Bosch 1800 4-1/2 Inch Angle Grinder	7.5 Amps, 11,000 RPM Lock-on/off switch For extended use applications AC/DC capability Extends the versatility of the tool by working from DC outlets such as welders and generators Vibration Control Handle Reduces vibration up to 60%, 5/8" - 11 Spindle Tool-free adjustable guard Spindle Lock For quick wheel changes	$89.00
DeWalt D28402 4-1/2 Inch Small Angle Grinder	10.0 Amp AC/DC Max Watts Out 1,200 W - No Load Speed 11,000 rpm Use Wheels RPM Above 12,000 rpm Spindle Lock Yes - Spindle Thread 5/8"-11 Tool Length 11-1/4" - Tool Weight 4.6 lbs Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents Paddle switch lock-off provides the user protection from accidental start up Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces	$92.75
DeWalt D28402N 4-1/2 Inch Small Angle Grinder with No Lock-On	10.0 Amp AC/DC Max Watts Out 1,200 W 11,000 rpm motor designed for faster material removal and higher overload protection Tool Length 11 1/4" - Tool Weight 4.6 lbs Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents No Lock-On paddle switch lock-off provides the user protection from accidental start up Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces One piece brush arm prevents brush hang-up due to dust ingress Auto-off brushes shut the tool down when the brushes need replacing to avoid damage Matching wheel flanges allow the use of common accessories	$92.75
DeWalt D28112 4-1/2 Inch Small Angle Grinder	10.0 Amp AC/DC Max Watts Out 1,200 W - No Load Speed 11,000 rpm Use Wheels RPM Above 12,000 rpm Spindle Lock Yes - Spindle Thread 5/8"-11 Tool Length 11 1/4" - Tool Weight 4.6 lbs Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents Lock-on slide switch provides the user comfort in extended use applications Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces	$92.75
Milwaukee 6140-6 4-1/2 Inch Right Angle Disc Sander/Grinder	5.5 Amp 0.75 HP Motor with High Output Fans Optimum Speed Range For Various Accessories All Ball And Roller Bearing Construction Milwaukee Spiral Bevel Gears - For optimum motor torque transfer Replaceable armature pinion gear - 5/8 Inch - 11 Spindle Size Cast Aluminum Gear Housing with Recessed Spindle Lock 3 Position Large Flanged Side Handle Adjustable Wheel Guard - Tool-free adjustment	$93.25
Bosch 1810PSD 4-1/2 in. Paddle Switch Grinder No Lock-on Switch	8.0 amp No Load RPM 11,000 Wheel Diameter 4-1/2 In. Spindle Thread 5/8 In. - 11 In. Length 11-1/4 In. Weight (lbs.) 4.3 Switch Type No Lock-on Switch	$91.25
Milwaukee 6148-6 4-1/2 Inch Magnum Right Angle Disc Sander/Grinder	8.5 Amp Motor, 10,000 RPM, Double Insulated Powerful Milwaukee 1.6 HP Motor With Long Life Brushes Optimum Speed Range For Various Accessories Milwaukee Paddle Switch With Integrated Lock-Off Button Cast Aluminum Gear Housing With Recessed Spindle Lock 3-Position Large Flanged Side Handle Adjustable Wheel Guard - Tool-free adjustment Lock-On Button - For continuous operation	$96.75
Milwaukee 6148-30 4 1/2 - 5 Inch Angle Grinder with Paddle Switch Lock-On	10 Amp, 825 MWO Motor-overload protection and power for daily applications 25% Longer Lasting Epoxy Protection-extends motor life by protecting the copper wire from abrasion Tool Free, Burst Resistant Guard- the only grinder in its class with a tool free guard Multi-Port Exhaust-reduces motor burn-up by efficiently venting hot air out of the grinder Double Insulated Kit Includes: Side Handle, 4-1/2" & 5" Type 27 Guard, Spanner Wrench, Flanges, 4-1/2" Wheel, Contractor Bag	$99.00
Bosch 1811PS 5 in. Paddle Switch Grinder	9.0 amp No Load RPM 11,000 Wheel Diameter 5 In. Spindle Thread 5/8 In.-11 In. Length 11-3/4 In. Weight (lbs.) 4.8 Max. Motor HP 1.8	$101.25
Bosch 1801 5 Inch Angle Grinder	9.5 Amp, 11,000 RPM Vibration Control Handle reduces vibration Lock-on/off switch For extended use applications AC/DC capability extends the versatility of the tool Sealed switch Keeps debris out of the switch mechanism ServiceMinder brushes stops the tool when maintenance is required Epoxy Coated Field Windings 5/8" -11 Spindle Wide Tool-free adjustable guard Spindle Lock For quick wheel changes Directed Air Flow	$101.25
Bosch 1811PSD 5 in. Paddle Switch Grinder No Lock-on Switch	9.0 amp No Load RPM 11,000 Wheel Diameter 5 In. Spindle Thread 5/8 In.-11 In. Length 11-3/4 In. Weight (lbs.) 4.8 Max. Motor HP 1.8 Switch Type No Lock-on Switch	$103.50
Milwaukee 6145 4 1/2 Inch Right Angle Disc Sander/Grinder	5.5 Amp 0.75 HP Motor with High Output Fans 1/2 Inch - 13 Spindle Size Optimum Speed Range For Various Accessories All Ball And Roller Bearing Construction Milwaukee Spiral Bevel Gears - Replaceable armature pinion gear Cast Aluminum Gear Housing with Recessed Spindle Lock 3 Position Large Flanged Side Handle Adjustable Wheel Guard - Tool-free adjustment	$107.50
DeWalt DW802G 4-1/2 Inch Paddle Switch Grinder (grounded)	Amps: 9.0 AC/DC Amps Max Watts Out: 1,000 W No Load Speed: 10,000 rpm Use Wheels RPM Above: 11,000 rpm Spindle Lock: Yes Spindle Thread: 5/8"-11 Tool Length: 11.5 " Tool Weight: 5.1 lbs	$107.50
Milwaukee 6151 4-1/2 Inch Magnum Right Angle Disc Sander/Grinder	8.5 Amp, 1.6 HP Motor With Long Life Brushes 10,000 RPM / Double Insulated Optimum Speed Range For Various Accessories Milwaukee Paddle Switch With Integrated Lock-Off Button Cast Aluminum Gear Housing With Recessed Spindle Lock 3-Position Large Flanged Side Handle Adjustable Wheel Guard - Tool-free adjustment Lock-On Button - For continuous operation	$112.50
Milwaukee 6141 5 Inch Right Angle Disc Sander/Grinder	5.5 Amp 0.75 HP Motor with High Output Fans Optimum Speed Range For Various Accessories All Ball And Roller Bearing Construction - Spiral Bevel Gears Replaceable armature pinion gear 5/8 Inch - 11 Spindle Size Cast Aluminum Gear Housing with Recessed Spindle Lock 3-Position Large Flanged Side Handle Adjustable Wheel Guard - Tool-free adjustment	$112.50
Milwaukee 6153-20 4-1/2 Inch Super Magnum Right Angle Disc Sander/Grinder	12.0 Amp Motor 2.1 maximum horsepower, 11,000 RPM, AC-DC Spiral bevel gearing for performance and durability All ball and roller bearing construction Tool-free adjustable wheel guard Integrated Lock-Off button in the paddle switch Double insulated (two prong cord) Standard 5/8-11 threaded arbor	$116.00
Milwaukee 6149-20 5 Inch Magnum Right Angle Disc Sander/Grinder	8.5 Amp, 1.6 HP Motor with Long Life Brushes 10,000 RPM / Double Insulated Optimum Speed Range For Various Accessories Milwaukee Paddle Switch With Integrated Lock-Off Button Cast Aluminum Gear Housing With Recessed Spindle Lock 3-Position Large Flanged Side Handle Adjustable Wheel Guard - Tool-free adjustment Lock-On Button - For continuous operation	$116.50
Makita GA5010Z 5 Inch Angle Grinder	10.5 AMP motor delivers more output Gear housing rotates 90° for operator convenience Refined Design at only 4.8 lbs. AC/DC switch for use with alternative power source Labyrinth construction seals the motor from dust and debris Externally accessible brushes for greater serviceability Soft Grip for more comfort and control	$121.75
Milwaukee 6116-30 4 1/2 Inch Small Angle Grinder with Paddle Switch Lock-On	12.0 Amp, 1490 MWO Motor -high overload protection and power for difficult applications ESO: Electronic Shut-Off -shuts down the grinder when the wheel is stalled in a pinch providing greater control and reduced tool damage 4-1/2" & 5" Type 27 Guard Included- for added productivity - Tool Free, Burst Resistant Guard -quickly adjust the guard without a tool Soft Grip 3-Position Handle-provides optimal control during various applications 10,000 RPM -optimized speed for 4-1/2"/5" wheels Kit Includes: Side Handle, 4-1/2" & 5" Type 27 Guard, Spanner Wrench, Flanges - Double Insulated	$129.00
Makita 9005B 5 Inch Angle Grinder with Lock-On	9.0 Amp motor for powerful performance Light weight (6.6 Lbs.) Ball bearing construction Removable side handle can be installed on either side Shaft lock for easy accessory changes - AC/DC lock-on switch Standard 5/8"-11 UNC spindle - Lock-on button Grinding Wheel: 5" - Wire Cup Brush: 3-1/2" - Sanding Disc: 5" 10,000 RPM - Double insulated	$130.25
Makita GA5020 5 Inch Angle Grinder w/ SJS	SJS Technology prevents Tool Kickback caused by Wheel Binding Powerful 10.5 AMP motor delivers more output Electric Brake provides higher work efficiency for the operator Gear housing rotates 90° for operator convenience Refined Design at only 4.8 lbs. AC/DC switch for use with alternative power source Labyrinth construction seals the motor from dust and debris Externally accessible brushes for greater serviceability Soft Grip for more comfort and control	$132.25
Makita GA6010Z 6 Inch Cut-off/Angle Grinder	10.5 Amp Gear housing rotates 90° for operator convenience Refined Design at only 4.8 lbs. AC/DC switch for use with alternative power source Labyrinth construction seals the motor from dust and debris Externally accessible brushes for greater serviceability Soft Grip for more comfort and control	$132.25
Makita 9564PC 4-1/2 Inch Angle Grinder with SJS	Powerful 13 AMP motor delivers more output for increased performance Super Joint System (SJS) helps prevent gear damage No Load RPM: 11,500 Gear housing rotates 90° for operator convenience Refined design at only 4.2 lbs. Large ergonomic paddle-switch for operator comfort Tool-less wheel cover for easy wheel change Ideal for Welders, Fabricators, Masons, Maintenance/Repair etc	$137.75
Bosch 1821 5 Inch Small Angle Grinder - Rat Tail with Lock On Switch	9.5 Amp, 11,000 RPM 2-Position Vibration Control Handle Reduces vibration up to 60%, providing uncompromising user comfort for extended periods of work Rear Handle Trigger with Lock-on/off switch For extended use applications Epoxy Coated Field Windings Provide the ultimate protection against abrasive dust and metal debris AC/DC Capability Extends the versatility of the tool by working from DC outlets such as welders and generators	$131.00
DeWalt DW831 5 Inch (125mm) Medium Angle Grinder	12.0 Amps AC/DC Max Watts Out 1,837 W No Load Speed 10,000 rpm Use Wheels RPM Above 11,000 rpm Spindle Lock Yes - Spindle Thread 5/8"-11 Tool Length 14.33" - Tool Weight 7.4 lbs Rear handle design for greater comfort and control External brush doors for easy servicing	$134.50
Milwaukee 6155-20 5 Inch Super Magnum Right Angle Disc Sander/Grinder	12.0 Amp motor 2.1 maximum horsepower, 11,000 RPM, AC-DC Spiral bevel gearing for performance and durability All ball and roller bearing construction Tool-free adjustable wheel guard Integrated Lock-Off button in the paddle switch Double insulated (two prong cord) Standard 5/8-11 threaded arbor	$134.75
Makita 9565PC 5 Inch Angle Grinder with SJS	Powerful 13 AMP motor delivers more output for increased performance Super Joint System (SJS) helps prevent gear damage No Load RPM: 11,500 Gear housing rotates 90° for operator convenience Refined design at only 4.2 lbs. Large ergonomic paddle-switch for operator comfort Tool-less wheel cover for easy wheel change Ideal for Welders, Fabricators, Masons, Maintenance/Repair etc	$140.75
Milwaukee 6149-6 4-1/2 Inch Magnum Right Angle Disc Sander/Grinder Kit	8.5 Amp 1.6 HP Motor with Long Life Brushes 10,000 RPM / Double Insulated Milwaukee Paddle Switch With Integrated Lock-Off Button Cast Aluminum Gear Housing With Recessed Spindle Lock 3-Position Large Flanged Side Handle Adjustable Wheel Guard - Tool-free adjustment Lock-On Button - For continuous operation Includes steel carrying case	$136.50
Bosch 1821D 5 Inch Small Angle Grinder - Rat Tail	9.5 Amp, 11,000 RPM 2-Position Vibration Control Handle Reduces vibration up to 60%, providing uncompromising user comfort for extended periods of work Epoxy Coated Field Windings Provides the ultimate protection against abrasive dust and metal debris AC/DC Capability Extends the versatility of the tool by working from DC outlets such as welders and generators Tool-Free Adjustable Guard Quick guard installation and adjustments	$134.50
Makita 9564CV 4-1/2 Inch Industrial Angle Grinder Hi-Speed	12.0 Amp Motor, 2800 - 10500 RPM Labyrinth construction seals motor & bearings from contamination SJS - Super Joint System prevents tool kickback & gear damage Electronic limiter stops the motor and prevents overload "Tool-less" wheel guard adjustment for easy clamping Protective zig zag varnish seals armature and field Grinding Wheel: 4-1/2" - Wire Cup Brush: 3" - Sand. Disc: 4-1/2" Spindle thread: 5/8" x 11 UNC - Net Weight: 4.0 Lbs.	$149.25
DeWalt D28115 4-1/2 In. High Power Small Angle Grinder	Amps: 13.0 Amps Max Watts Out: 1,700 W No Load Speed: 9,000 rpm Use Wheels RPM Above: 9,900 rpm Spindle Lock: Yes Spindle Thread: 5/8"-11 Tool Length: 15.25 " Tool Weight: 4.75 lbs	$139.75
DeWalt D28115N 4-1/2 In. to 5 In. High Power Small Angle Grinder	Amps: 13.0 Amps Max Watts Out: 1,700 W No Load Speed: 9,000 rpm Use Wheels RPM Above: 9,900 rpm Spindle Lock: Yes Spindle Thread: 5/8"-11 Tool Length: 15.25 " Tool Weight: 4.75 lbs	$139.75
Milwaukee 6116-30 4 1/2 Inch Small Angle Grinder with Paddle Switch Lock-On	12.0 Amp, 1490 MWO Motor -high overload protection and power for difficult applications ESO: Electronic Shut-Off -shuts down the grinder when the wheel is stalled in a pinch providing greater control and reduced tool damage 4-1/2" & 5" Type 27 Guard Included- for added productivity - Tool Free, Burst Resistant Guard -quickly adjust the guard without a tool Soft Grip 3-Position Handle-provides optimal control during various applications 10,000 RPM -optimized speed for 4-1/2"/5" wheels Kit Includes: Side Handle, 4-1/2" & 5" Type 27 Guard, Spanner Wrench, Flanges - Double Insulated	$129.00
Makita 9565CV 5 Inch Industrial Angle Grinder	12.0 Amp motor design - 2,800 to 10,500 RPM Labyrinth construction seals motor & bearings from contamination SJS - Super Joint System prevents tool kickback & gear damage Electronic limiter stops the motor and prevents accidental burnout "Tool-less" wheel guard adjustment for easy clamping Protective zig zag varnish seals armature and field Grinding Wheel: 5" - Wire Cup Brush: 3" - Sanding Disc: 5" Spindle thread: 5/8" x 11 UNC - Net Weight: 4.0 Lbs.	$152.75
Milwaukee 6154-20 4-1/2 Inch Super Magnum Right Angle Disc Sander/Grinder	12.0 Amp, 2.1 HP Motor Cast Aluminum Gear Housing With Recessed Spindle Lock Milwaukee Paddle Switch With Integrated Lock-Off Button Adjustable Wheel Guard - Lock-On Button, continuous operation Electronic Feedback - Maintains speed and torque Dial Speed Control - Provides optimum speed selection Soft Start Increases Gear And Bearing Life Electronic Overload Protection - Milwaukee Quik-Lok Cord Set	$141.50
Makita 9015A 5 Inch Disc Grinder	Improved 12.5 Amp motor delivers 10,000 RPM Labyrinth construction seals motor & bearings from contamination SJS - Super Joint System Helps Prevent Kickback Electric brake for fast stopping of the grinding wheel Grinder head rotates 90° left or right Protective zig zag varnish seals armature for long tool life Grinding Wheel: 5" - Wire Cup Brush: 3-1/2" - Sanding Disc: 5" 5.5 Lbs. - Double insulated	$158.25
Milwaukee 6156-20 5 Inch Super Magnum Right Angle Disc Sander/Grinder	12.0 Amp, 2.1 HP Motor with Long Life Brushes Cast Aluminum Gear Housing With Recessed Spindle Lock Milwaukee Paddle Switch With Integrated Lock-Off Button Adjustable Wheel Guard - Lock-On Button, continuous operation Electronic Feedback - Maintains speed and torque Dial Speed Control - Provides optimum speed selection Soft Start - Electronic Overload Protection Milwaukee Quik-Lok Cord Set	$145.50
DeWalt D28131 4-1/2 - 5 Inch High Performance Small Angle Grinder	13.0 Amp AC/DC Max Watts Out 1,700 W - No Load Speed 11,000 rpm Use Wheels RPM Above 12,000 rpm Spindle Lock Yes - Spindle Thread 5/8"-11 Tool Length 13" - Tool Weight 4.6 lbs Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents Complete Electronic Controlprovides multiple advanced technology features such as E-Clutch, Power-Off and Power Loss Reset Lock-on slide switch provides increased user comfort in extended use applications	$147.25
DeWalt D28114 4-1/2 - 5 Inch High Performance Small Angle Grinder	13.0 Amp AC/DC Max Watts Out 1,700 W - No Load Speed 11,000 rpm Use Wheels RPM Above 12,000 rpm Spindle Lock Yes - Spindle Thread 5/8"-11 Tool Length 13" - Tool Weight 4.6 lbs Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents Complete Electronic Controlprovides multiple advanced technology features such as E-Clutch, Power-Off and Power Loss Reset Vibration reducing two position side handle provides user comfort and reduces user felt vibration	$147.25
DeWalt D28114N 4-1/2- 5 Inch High Performance No-Lock On Paddle Switch Small Angle Grinder	13.0 Amp AC/DC Max Watts Out 1,700 W - No Load Speed 11,000 rpm Use Wheels RPM Above 12,000 rpm Spindle Lock Yes - Spindle Thread 5/8"-11 Tool Length 13" - Tool Weight 4.6 lbs No-Lock On paddle switch prevents the user from locking the grinder on Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents Complete Electronic Controlprovides multiple advanced technology features such as E-Clutch, Power-Off and Power Loss Reset	$147.25
Milwaukee 6123-30 5 - 6 Inch Angle Grinder with Trigger Switch Lock-On	12.0 Amp, 1490 MWO Motor -high overload protection and power for difficult applications ESO: Electronic Shut-Off -shuts down the grinder when the wheel is stalled in a pinch providing greater control and reduced tool damage 4-1/2" & 5" Type 27 Guard Included- for added productivity - Tool Free, Burst Resistant Guard -quickly adjust the guard without a tool Soft Grip 3-Position Handle-provides optimal control during various applications 10,000 RPM -optimized speed for 4-1/2"/5" wheels Kit Includes: Side Handle, 4-1/2" & 5" Type 27 Guard, Spanner Wrench, Flanges - Double Insulated	$149.00
Milwaukee 6160-30 6 Inch Angle Grinder with Paddle Switch Lock-On	12.0 Amp, 1490 MWO Motor -high overload protection and power for difficult applications ESO: Electronic Shut-Off -shuts down the grinder when the wheel is stalled in a pinch providing greater control and reduced tool damage 4-1/2" & 5" Type 27 Guard Included- for added productivity - Tool Free, Burst Resistant Guard -quickly adjust the guard without a tool Soft Grip 3-Position Handle-provides optimal control during various applications 10,000 RPM -optimized speed for 4-1/2"/5" wheels Kit Includes: Side Handle, 4-1/2" & 5" Type 27 Guard, Spanner Wrench, Flanges - Double Insulated	$149.00
Makita 9566PC 6 Inch Angle Grinder with SJS	Powerful 13 AMP motor delivers more output for increased performance Super Joint System (SJS) helps prevent gear damage No Load RPM: 10,000 Gear housing rotates 90° for operator convenience Refined design at only 4.2 lbs. Large ergonomic paddle-switch for operator comfort Tool-less wheel cover for easy wheel change Ideal for Welders, Fabricators, Masons, Maintenance/Repair etc	$152.50
Bosch 1803EVS 5 Inch Angle Grinder	8.5 Amp, 2,800-11,000 RPM Lock-on/off Switch Vibration Control Handle Reduces vibration Variable speed dial 5/8" - 11 spindle Kickback Stop Tool-free adjustable guard Directed Air Flow Restart Protection Shuts the tool down should the power supply be interrupted	$146.75
Bosch 1806E 6-Inch Angle Grinder	12 Amps, 9,300 RPM Vibration Control Handle Reduces vibration Lock-on/off switch 5/8" - 11 Spindle Wide flexibility Tool-free adjustable guard Restart Protection Shuts the tool down should the power supply be interrupted Kickback Stop Shuts the tool down should the wheel get into a bind Directed Air Flow	$146.75
Makita 9566CV 6 Inch Industrial Angle Grinder	12.0 Amp motor design, 4,000 - 9,000 RPM Labyrinth construction seals motor & bearings from contamination SJS - Super Joint System prevents tool kickback & gear damage Electronic limiter stops the motor and prevents accidental burnout "Tool-less" wheel guard adjustment for easy clamping Protective zig zag varnish seals armature and field Grinding Wheel: 6" - Wire Cup Brush: 3" - Sanding Disc: 6" Spindle thread: 5/8" x 11 UNC - Net Weight 5.3 lbs.	$165.00
Bosch 1824E 5 Inch Small Angle Grinder with Electronics & Lock On Switch	12 Amp No Load RPM 11,000 2-Position Vibration Control Handle Reduces vibration up to 60%, providing uncompromising user comfort for extended periods of work Rear Handle Trigger with Lock-on/off switchFor extended use Restart Protection Shuts the tool off should the power supply be interrupted Constant Reponse Circuitry Provides soft start, constant speed under load and overload protection	$153.25
Bosch 1824ED 5 Inch Small Angle Grinder with Electronics	12 Amp No Load RPM 11,000 2-Position Vibration Control Handle Reduces vibration up to 60%, providing uncompromising user comfort for extended periods of work Rear Handle Trigger with Lock-on/off switchFor extended use Restart Protection Shuts the tool off should the power supply be interrupted Constant Reponse Circuitry Provides soft start, constant speed under load and overload protection	$154.50
DeWalt D28140 6 Inch High Performance Cut-Off/Grinder	13.0 Amp AC/DC Max Watts Out 1,700 W - No Load Speed 9,000 rpm Use Wheels RPM Above 9,900 rpm Spindle Lock Yes - Spindle Thread 5/8"-11 Tool Length 13" - Tool Weight 4.6 lbs Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents Dual Abrasion Protection provides increased motor protection from damaging dust and debris ingestion Complete Electronic Controlprovides multiple advanced technology features such as E-Clutch, Power-Off and Power Loss Reset Lock-on slide switch provides increased user comfort in extended use applications	$176.00
DeWalt D28144 6 Inch High Performance Cut-Off/Grinder	13.0 Amp AC/DC Max Watts Out 1,700 W - No Load Speed 9,000 rpm Use Wheels RPM Above 9,900 rpm Spindle Lock Yes - Spindle Thread 5/8"-11 Tool Length 13" - Tool Weight 4.6 lbs Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents Dual Abrasion Protection provides increased motor protection from damaging dust and debris ingestion Complete Electronic Controlprovides multiple advanced technology features such as E-Clutch, Power-Off and Power Loss Reset Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage	$176.00
DeWalt D28144N 6 Inch High Performance Cut-Off/Grinder with No-Lock On Paddle Switch	13.0 Amp AC/DC Max Watts Out 1,700 W - No Load Speed 9,000 rpm Use Wheels RPM Above 9,900 rpm Spindle Lock Yes - Spindle Thread 5/8"-11 Tool Length 13" - Tool Weight 4.6 lbs Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents Dual Abrasion Protection provides increased motor protection from damaging dust and debris ingestion Complete Electronic Controlprovides multiple advanced technology features such as E-Clutch, Power-Off and Power Loss Reset No-Lock On paddle switch prevents the user from locking the grinder on	$176.00
DeWalt D28065 5 Inch / 6 Inch Rat Tail Angle Grinder	Amps: 13.0 Amps Max Watts Out: 1,700 W No Load Speed: 9,000 rpm Use Wheels RPM Above: 9,900 rpm Spindle Lock: Yes Spindle Thread: 5/8"-11 Tool Length: 15.25 " Tool Weight: 4.75 lbs	$193.00
DeWalt D28065N 5 Inch / 6 Inch Rat Tail Angle Grinder (no lock on)	Amps: 13.0 Amps Max Watts Out: 1,700 W No Load Speed: 9,000 rpm Use Wheels RPM Above: 9,900 rpm Spindle Lock: Yes Spindle Thread: 5/8"-11 Tool Length: 15.25 " Tool Weight: 4.75 lbs	$193.00
Makita BGA452 4-1/2 Inch 18V LXT Lithium-Ion Cordless Cut-Off/ Angle Grinder Kit	LXT Lithium-Ion battery Makita built produces 50% faster grinding with an impressive 10,000 RPM LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power) 45-minute Optimum Charger and battery communicates throughout the charging process using the built-in chip in the battery and built-in CPU chip in the charger. The Charger also uses "Active 3 Control" for current control, thermal control & voltage control. More compact design at only 12-1/2" long and weighs only 5.6 lbs.	$316.50

Angle Grinder & Sander Comparison - 4 to 6 Inch

Makita

9554NB

4-1/2 Inch Angle Grinder

6.0 Amp Motor
Small circumference barrel grip (only 2.5") for added comfort
Protective zig-zig varnish seals motor from contaminants
Labyrinth construction seals and protects the motor and bearings
All ball bearing design and metal gear housing for durability
Rotatable gear housing rotates 90° for cutting applications

$57.00

DeWalt

D28110

4-1/2 Inch Small Angle Grinder

7.0 Amp AC/DC
Max Watts Out 800 W - No Load Speed 11,000 rpm
Use Wheels RPM Above 12,000 rpm
Spindle Lock Yes - Spindle Thread 5/8"-11
Tool Length 10 3/4" - Tool Weight 4.1 lbs
Low profile jam-pot gear case increases durability and allows tool to fit into tight spaces
2-position removable side handle provides increased comfort and control
Slim, ergonomic body design provides increased comfort in extended use applications

$62.25

Makita

9557PB

4-1/2 Inch Angle Grinder with extra large Paddle Switch

7.5 AMP motor design for high output power in a more compact tool (only 3.5 lbs.)
Protective zig-zig varnish seals motor from contaminants
Labyrinth construction seals and protects the motor and bearings
11,000 RPM
Small circumference barrel grip (only 2.5") for added comfort
Rotatable gear housing rotates 90° for cutting applications
AC/DC switch for use with alternative power sources
Extra large paddle switch for easy operation

$75.25

Bosch

1375A

4-1/2 Inch Angle Grinder

6 Amps, 11,000 RPM
Lock-on/off switch for extended use applications
Service Minder brushes eliminates guesswork, stops the tool when preventative maintenance is required
Epoxy coated field windings provides ultimate protection against abrasive dust and metal debris
5/8" -11 Spindle wide flexibility for mounting most popular accessories
Spindle lock for quick wheel changes
Double Insulated, UL listed, complies to OSHA
2-Position auxiliary handle specifically designed and angled to a "natural" position for maximum comfort and control

$76.75

Milwaukee

6140-30

4 1/2 - 5 Inch Angle Grinder with Paddle Switch Lock-On

7.5 Amp, 825 MWO Motor-overload protection and power for daily applications
25% Longer Lasting Epoxy Protection-extends motor life by protecting the copper wire from abrasion
X-Large Paddle Switch-increased comfort and ease-of-use when operating in various positions
Tool Free, Burst Resistant Guard- the only grinder in its class with a tool free guard
Multi-Port Exhaust-reduces motor burn-up by efficiently venting hot air out of the grinder
Kit Includes: Side Handle, 4-1/2" & 5" Type 27 Guard, Spanner Wrench, Flanges - Double Insulated

$79.00

Bosch

1347A

4-1/2 Inch Angle Grinder

6 Amps, 11,000 RPM
Lock-on/off switch for extended use applications
Service Minder brushes Eliminates guesswork, stops the tool when preventative maintenance is required
Precision spiral bevel gears Quality engineering and construction for smooth power transmission
5/8" -11 Spindle For quick wheel changes
Spindle lock Wide flexibility for mounting most popular accessories
2-Position auxiliary handle
Double Insulated, UL listed, complies to OSHA

$82.25

Makita

9558PB

5 Inch Angle Grinder with extra large Paddle Switch

7.5 AMP motor design for high output power in a more compact tool (only 3.5 lbs.)
Labyrinth construction seals and protects the motor and bearings from dust and debris by creating a complex set of channels
Rotatable gear housing rotates 90° for cutting applications
Small circumference barrel grip (only 2.5") for added comfort
No load RPM 11,000
Extra Large Paddle Switch for Easy Operation

$90.25

Bosch

1810PS

4-1/2 In. Paddle Switch Grinder

Amperage 8.0
No Load RPM 11,000
Wheel Diameter 4-1/2 In.
Spindle Thread 5/8 In.-11 In.
Length 11-1/4 In.
Weight (lbs.) 4.3
Max. Motor HP 1.1
Rating 120V AC/DC

$89.00

Bosch

1800

4-1/2 Inch Angle Grinder

7.5 Amps, 11,000 RPM
Lock-on/off switch For extended use applications
AC/DC capability Extends the versatility of the tool by working from DC outlets such as welders and generators
Vibration Control Handle Reduces vibration up to 60%,
5/8" - 11 Spindle
Tool-free adjustable guard
Spindle Lock For quick wheel changes

$89.00

DeWalt

D28402

4-1/2 Inch Small Angle Grinder

10.0 Amp AC/DC
Max Watts Out 1,200 W - No Load Speed 11,000 rpm
Use Wheels RPM Above 12,000 rpm
Spindle Lock Yes - Spindle Thread 5/8"-11
Tool Length 11-1/4" - Tool Weight 4.6 lbs
Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents
Paddle switch lock-off provides the user protection from accidental start up
Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces

$92.75

DeWalt

D28402N

4-1/2 Inch Small Angle Grinder with No Lock-On

10.0 Amp AC/DC
Max Watts Out 1,200 W
11,000 rpm motor designed for faster material removal and higher overload protection
Tool Length 11 1/4" - Tool Weight 4.6 lbs
Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents
No Lock-On paddle switch lock-off provides the user protection from accidental start up
Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces
One piece brush arm prevents brush hang-up due to dust ingress
Auto-off brushes shut the tool down when the brushes need replacing to avoid damage
Matching wheel flanges allow the use of common accessories

$92.75

DeWalt

D28112

4-1/2 Inch Small Angle Grinder

10.0 Amp AC/DC
Max Watts Out 1,200 W - No Load Speed 11,000 rpm
Use Wheels RPM Above 12,000 rpm
Spindle Lock Yes - Spindle Thread 5/8"-11
Tool Length 11 1/4" - Tool Weight 4.6 lbs
Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents
Lock-on slide switch provides the user comfort in extended use applications
Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces

$92.75

Milwaukee

6140-6

4-1/2 Inch Right Angle Disc Sander/Grinder

5.5 Amp 0.75 HP Motor with High Output Fans
Optimum Speed Range For Various Accessories
All Ball And Roller Bearing Construction
Milwaukee Spiral Bevel Gears - For optimum motor torque transfer
Replaceable armature pinion gear - 5/8 Inch - 11 Spindle Size
Cast Aluminum Gear Housing with Recessed Spindle Lock
3 Position Large Flanged Side Handle
Adjustable Wheel Guard - Tool-free adjustment

$93.25

Bosch

1810PSD

4-1/2 in. Paddle Switch Grinder
No Lock-on Switch

8.0 amp
No Load RPM 11,000
Wheel Diameter 4-1/2 In.
Spindle Thread 5/8 In. - 11 In.
Length 11-1/4 In.
Weight (lbs.) 4.3
Switch Type No Lock-on Switch

$91.25

Milwaukee

6148-6

4-1/2 Inch Magnum Right Angle Disc Sander/Grinder

8.5 Amp Motor, 10,000 RPM, Double Insulated
Powerful Milwaukee 1.6 HP Motor With Long Life Brushes
Optimum Speed Range For Various Accessories
Milwaukee Paddle Switch With Integrated Lock-Off Button
Cast Aluminum Gear Housing With Recessed Spindle Lock
3-Position Large Flanged Side Handle
Adjustable Wheel Guard - Tool-free adjustment
Lock-On Button - For continuous operation

$96.75

Milwaukee

6148-30

4 1/2 - 5 Inch Angle Grinder with Paddle Switch Lock-On

10 Amp, 825 MWO Motor-overload protection and power for daily applications
25% Longer Lasting Epoxy Protection-extends motor life by protecting the copper wire from abrasion
Tool Free, Burst Resistant Guard- the only grinder in its class with a tool free guard
Multi-Port Exhaust-reduces motor burn-up by efficiently venting hot air out of the grinder
Double Insulated
Kit Includes: Side Handle, 4-1/2" & 5" Type 27 Guard, Spanner Wrench, Flanges, 4-1/2" Wheel, Contractor Bag

$99.00

Bosch

1811PS

5 in. Paddle Switch Grinder

9.0 amp
No Load RPM 11,000
Wheel Diameter 5 In.
Spindle Thread 5/8 In.-11 In.
Length 11-3/4 In.
Weight (lbs.) 4.8
Max. Motor HP 1.8

$101.25

Bosch

1801

5 Inch Angle Grinder

9.5 Amp, 11,000 RPM
Vibration Control Handle reduces vibration
Lock-on/off switch For extended use applications
AC/DC capability extends the versatility of the tool
Sealed switch Keeps debris out of the switch mechanism
ServiceMinder brushes stops the tool when maintenance is required
Epoxy Coated Field Windings
5/8" -11 Spindle Wide
Tool-free adjustable guard
Spindle Lock For quick wheel changes
Directed Air Flow

$101.25

Bosch

1811PSD

5 in. Paddle Switch Grinder
No Lock-on Switch

9.0 amp
No Load RPM 11,000
Wheel Diameter 5 In.
Spindle Thread 5/8 In.-11 In.
Length 11-3/4 In.
Weight (lbs.) 4.8
Max. Motor HP 1.8
Switch Type No Lock-on Switch

$103.50

Milwaukee

6145

4 1/2 Inch Right Angle Disc Sander/Grinder

5.5 Amp 0.75 HP Motor with High Output Fans
1/2 Inch - 13 Spindle Size
Optimum Speed Range For Various Accessories
All Ball And Roller Bearing Construction
Milwaukee Spiral Bevel Gears - Replaceable armature pinion gear
Cast Aluminum Gear Housing with Recessed Spindle Lock
3 Position Large Flanged Side Handle
Adjustable Wheel Guard - Tool-free adjustment

$107.50

DeWalt

DW802G

4-1/2 Inch Paddle Switch Grinder (grounded)

Amps: 9.0 AC/DC Amps Max Watts Out: 1,000 W
No Load Speed: 10,000 rpm
Use Wheels RPM Above: 11,000 rpm
Spindle Lock: Yes
Spindle Thread: 5/8"-11
Tool Length: 11.5 "
Tool Weight: 5.1 lbs

$107.50

Milwaukee

6151

4-1/2 Inch Magnum Right Angle Disc Sander/Grinder

8.5 Amp, 1.6 HP Motor With Long Life Brushes
10,000 RPM / Double Insulated
Optimum Speed Range For Various Accessories
Milwaukee Paddle Switch With Integrated Lock-Off Button
Cast Aluminum Gear Housing With Recessed Spindle Lock
3-Position Large Flanged Side Handle
Adjustable Wheel Guard - Tool-free adjustment
Lock-On Button - For continuous operation

$112.50

Milwaukee

6141

5 Inch Right Angle Disc Sander/Grinder

5.5 Amp 0.75 HP Motor with High Output Fans
Optimum Speed Range For Various Accessories
All Ball And Roller Bearing Construction - Spiral Bevel Gears
Replaceable armature pinion gear
5/8 Inch - 11 Spindle Size
Cast Aluminum Gear Housing with Recessed Spindle Lock
3-Position Large Flanged Side Handle
Adjustable Wheel Guard - Tool-free adjustment

$112.50

Milwaukee

6153-20

4-1/2 Inch Super Magnum Right Angle Disc Sander/Grinder

12.0 Amp Motor
2.1 maximum horsepower, 11,000 RPM, AC-DC
Spiral bevel gearing for performance and durability
All ball and roller bearing construction
Tool-free adjustable wheel guard
Integrated Lock-Off button in the paddle switch
Double insulated (two prong cord)
Standard 5/8-11 threaded arbor

$116.00

Milwaukee

6149-20

5 Inch Magnum Right Angle Disc Sander/Grinder

8.5 Amp, 1.6 HP Motor with Long Life Brushes
10,000 RPM / Double Insulated
Optimum Speed Range For Various Accessories
Milwaukee Paddle Switch With Integrated Lock-Off Button
Cast Aluminum Gear Housing With Recessed Spindle Lock
3-Position Large Flanged Side Handle
Adjustable Wheel Guard - Tool-free adjustment
Lock-On Button - For continuous operation

$116.50

Makita

GA5010Z

5 Inch Angle Grinder

10.5 AMP motor delivers more output
Gear housing rotates 90° for operator convenience
Refined Design at only 4.8 lbs.
AC/DC switch for use with alternative power source
Labyrinth construction seals the motor from dust and debris
Externally accessible brushes for greater serviceability
Soft Grip for more comfort and control

$121.75

Milwaukee

6116-30

4 1/2 Inch Small Angle Grinder with Paddle Switch Lock-On

12.0 Amp, 1490 MWO Motor -high overload protection and power for difficult applications
ESO: Electronic Shut-Off -shuts down the grinder when the wheel is stalled in a pinch providing greater control and reduced tool damage
4-1/2" & 5" Type 27 Guard Included- for added productivity - Tool Free, Burst Resistant Guard -quickly adjust the guard without a tool
Soft Grip 3-Position Handle-provides optimal control during various applications
10,000 RPM -optimized speed for 4-1/2"/5" wheels
Kit Includes: Side Handle, 4-1/2" & 5" Type 27 Guard, Spanner Wrench, Flanges - Double Insulated

$129.00

Makita

9005B

5 Inch Angle Grinder with Lock-On

9.0 Amp motor for powerful performance
Light weight (6.6 Lbs.)
Ball bearing construction
Removable side handle can be installed on either side
Shaft lock for easy accessory changes - AC/DC lock-on switch
Standard 5/8"-11 UNC spindle - Lock-on button
Grinding Wheel: 5" - Wire Cup Brush: 3-1/2" - Sanding Disc: 5"
10,000 RPM - Double insulated

$130.25

Makita

GA5020

5 Inch Angle Grinder w/ SJS

SJS Technology prevents Tool Kickback caused by Wheel Binding
Powerful 10.5 AMP motor delivers more output
Electric Brake provides higher work efficiency for the operator
Gear housing rotates 90° for operator convenience
Refined Design at only 4.8 lbs.
AC/DC switch for use with alternative power source
Labyrinth construction seals the motor from dust and debris
Externally accessible brushes for greater serviceability
Soft Grip for more comfort and control

$132.25

Makita

GA6010Z

6 Inch Cut-off/Angle Grinder

10.5 Amp
Gear housing rotates 90° for operator convenience
Refined Design at only 4.8 lbs.
AC/DC switch for use with alternative power source
Labyrinth construction seals the motor from dust and debris
Externally accessible brushes for greater serviceability
Soft Grip for more comfort and control

$132.25

Makita

9564PC

4-1/2 Inch Angle Grinder with SJS

Powerful 13 AMP motor delivers more output for increased performance
Super Joint System (SJS) helps prevent gear damage
No Load RPM: 11,500
Gear housing rotates 90° for operator convenience
Refined design at only 4.2 lbs.
Large ergonomic paddle-switch for operator comfort
Tool-less wheel cover for easy wheel change
Ideal for Welders, Fabricators, Masons, Maintenance/Repair etc

$137.75

Bosch

1821

5 Inch Small Angle Grinder - Rat Tail with Lock On Switch

9.5 Amp, 11,000 RPM
2-Position Vibration Control Handle Reduces vibration up to 60%, providing uncompromising user comfort for extended periods of work
Rear Handle Trigger with Lock-on/off switch For extended use applications
Epoxy Coated Field Windings Provide the ultimate protection against abrasive dust and metal debris
AC/DC Capability Extends the versatility of the tool by working from DC outlets such as welders and generators

$131.00

DeWalt

DW831

5 Inch (125mm) Medium Angle Grinder

12.0 Amps AC/DC
Max Watts Out 1,837 W
No Load Speed 10,000 rpm
Use Wheels RPM Above 11,000 rpm
Spindle Lock Yes - Spindle Thread 5/8"-11
Tool Length 14.33" - Tool Weight 7.4 lbs
Rear handle design for greater comfort and control
External brush doors for easy servicing

$134.50

Milwaukee

6155-20

5 Inch Super Magnum Right Angle Disc Sander/Grinder

12.0 Amp motor
2.1 maximum horsepower, 11,000 RPM, AC-DC
Spiral bevel gearing for performance and durability
All ball and roller bearing construction
Tool-free adjustable wheel guard
Integrated Lock-Off button in the paddle switch
Double insulated (two prong cord)
Standard 5/8-11 threaded arbor

$134.75

Makita

9565PC

5 Inch Angle Grinder with SJS

$140.75

Milwaukee

6149-6

4-1/2 Inch Magnum Right Angle Disc Sander/Grinder Kit

8.5 Amp
1.6 HP Motor with Long Life Brushes
10,000 RPM / Double Insulated
Milwaukee Paddle Switch With Integrated Lock-Off Button
Cast Aluminum Gear Housing With Recessed Spindle Lock
3-Position Large Flanged Side Handle
Adjustable Wheel Guard - Tool-free adjustment
Lock-On Button - For continuous operation
Includes steel carrying case

$136.50

Bosch

1821D

5 Inch Small Angle Grinder - Rat Tail

9.5 Amp, 11,000 RPM
2-Position Vibration Control Handle Reduces vibration up to 60%, providing uncompromising user comfort for extended periods of work
Epoxy Coated Field Windings Provides the ultimate protection against abrasive dust and metal debris
AC/DC Capability Extends the versatility of the tool by working from DC outlets such as welders and generators
Tool-Free Adjustable Guard Quick guard installation and adjustments

$134.50

Makita

9564CV

4-1/2 Inch Industrial Angle Grinder
Hi-Speed

12.0 Amp Motor, 2800 - 10500 RPM
Labyrinth construction seals motor & bearings from contamination
SJS - Super Joint System prevents tool kickback & gear damage
Electronic limiter stops the motor and prevents overload
"Tool-less" wheel guard adjustment for easy clamping
Protective zig zag varnish seals armature and field
Grinding Wheel: 4-1/2" - Wire Cup Brush: 3" - Sand. Disc: 4-1/2"
Spindle thread: 5/8" x 11 UNC - Net Weight: 4.0 Lbs.

$149.25

DeWalt

D28115

4-1/2 In. High Power Small Angle Grinder

Amps: 13.0 Amps
Max Watts Out: 1,700 W
No Load Speed: 9,000 rpm
Use Wheels RPM Above: 9,900 rpm
Spindle Lock: Yes
Spindle Thread: 5/8"-11
Tool Length: 15.25 "
Tool Weight: 4.75 lbs

$139.75

DeWalt

D28115N

4-1/2 In. to 5 In. High Power Small Angle Grinder

Amps: 13.0 Amps
Max Watts Out: 1,700 W
No Load Speed: 9,000 rpm
Use Wheels RPM Above: 9,900 rpm
Spindle Lock: Yes
Spindle Thread: 5/8"-11
Tool Length: 15.25 "
Tool Weight: 4.75 lbs

$139.75

Milwaukee

6116-30

4 1/2 Inch Small Angle Grinder with Paddle Switch Lock-On

$129.00

Makita

9565CV

5 Inch Industrial Angle Grinder

12.0 Amp motor design - 2,800 to 10,500 RPM
Labyrinth construction seals motor & bearings from contamination
SJS - Super Joint System prevents tool kickback & gear damage
Electronic limiter stops the motor and prevents accidental burnout
"Tool-less" wheel guard adjustment for easy clamping
Protective zig zag varnish seals armature and field
Grinding Wheel: 5" - Wire Cup Brush: 3" - Sanding Disc: 5"
Spindle thread: 5/8" x 11 UNC - Net Weight: 4.0 Lbs.

$152.75

Milwaukee

6154-20

4-1/2 Inch Super Magnum Right Angle Disc Sander/Grinder

12.0 Amp, 2.1 HP Motor
Cast Aluminum Gear Housing With Recessed Spindle Lock
Milwaukee Paddle Switch With Integrated Lock-Off Button
Adjustable Wheel Guard - Lock-On Button, continuous operation
Electronic Feedback - Maintains speed and torque
Dial Speed Control - Provides optimum speed selection
Soft Start Increases Gear And Bearing Life
Electronic Overload Protection - Milwaukee Quik-Lok Cord Set

$141.50

Makita

9015A

5 Inch Disc Grinder

Improved 12.5 Amp motor delivers 10,000 RPM
Labyrinth construction seals motor & bearings from contamination
SJS - Super Joint System Helps Prevent Kickback
Electric brake for fast stopping of the grinding wheel
Grinder head rotates 90° left or right
Protective zig zag varnish seals armature for long tool life
Grinding Wheel: 5" - Wire Cup Brush: 3-1/2" - Sanding Disc: 5"
5.5 Lbs. - Double insulated

$158.25

Milwaukee

6156-20

5 Inch Super Magnum Right Angle Disc Sander/Grinder

12.0 Amp, 2.1 HP Motor with Long Life Brushes
Cast Aluminum Gear Housing With Recessed Spindle Lock
Milwaukee Paddle Switch With Integrated Lock-Off Button
Adjustable Wheel Guard - Lock-On Button, continuous operation
Electronic Feedback - Maintains speed and torque
Dial Speed Control - Provides optimum speed selection
Soft Start - Electronic Overload Protection
Milwaukee Quik-Lok Cord Set

$145.50

DeWalt

D28131

4-1/2 - 5 Inch High Performance Small Angle Grinder

13.0 Amp AC/DC
Max Watts Out 1,700 W - No Load Speed 11,000 rpm
Use Wheels RPM Above 12,000 rpm
Spindle Lock Yes - Spindle Thread 5/8"-11
Tool Length 13" - Tool Weight 4.6 lbs
Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents
Complete Electronic Controlprovides multiple advanced technology features such as E-Clutch, Power-Off and Power Loss Reset
Lock-on slide switch provides increased user comfort in extended use applications

$147.25

DeWalt

D28114

4-1/2 - 5 Inch High Performance Small Angle Grinder

13.0 Amp AC/DC
Max Watts Out 1,700 W - No Load Speed 11,000 rpm
Use Wheels RPM Above 12,000 rpm
Spindle Lock Yes - Spindle Thread 5/8"-11
Tool Length 13" - Tool Weight 4.6 lbs
Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents
Complete Electronic Controlprovides multiple advanced technology features such as E-Clutch, Power-Off and Power Loss Reset
Vibration reducing two position side handle provides user comfort and reduces user felt vibration

$147.25

DeWalt

D28114N

4-1/2- 5 Inch High Performance No-Lock On Paddle Switch Small Angle Grinder

13.0 Amp AC/DC
Max Watts Out 1,700 W - No Load Speed 11,000 rpm
Use Wheels RPM Above 12,000 rpm
Spindle Lock Yes - Spindle Thread 5/8"-11
Tool Length 13" - Tool Weight 4.6 lbs
No-Lock On paddle switch prevents the user from locking the grinder on
Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents
Complete Electronic Controlprovides multiple advanced technology features such as E-Clutch, Power-Off and Power Loss Reset

$147.25

Milwaukee

6123-30

5 - 6 Inch Angle Grinder with Trigger Switch Lock-On

$149.00

Milwaukee

6160-30

6 Inch Angle Grinder with Paddle Switch Lock-On

$149.00

Makita

9566PC

6 Inch Angle Grinder with SJS

Powerful 13 AMP motor delivers more output for increased performance
Super Joint System (SJS) helps prevent gear damage
No Load RPM: 10,000
Gear housing rotates 90° for operator convenience
Refined design at only 4.2 lbs.
Large ergonomic paddle-switch for operator comfort
Tool-less wheel cover for easy wheel change
Ideal for Welders, Fabricators, Masons, Maintenance/Repair etc

$152.50

Bosch

1803EVS

5 Inch Angle Grinder

8.5 Amp, 2,800-11,000 RPM
Lock-on/off Switch
Vibration Control Handle Reduces vibration
Variable speed dial
5/8" - 11 spindle
Kickback Stop
Tool-free adjustable guard
Directed Air Flow
Restart Protection Shuts the tool down should the power supply be interrupted

$146.75

Bosch

1806E

6-Inch Angle Grinder

12 Amps, 9,300 RPM
Vibration Control Handle Reduces vibration
Lock-on/off switch
5/8" - 11 Spindle Wide flexibility
Tool-free adjustable guard
Restart Protection Shuts the tool down should the power supply be interrupted
Kickback Stop Shuts the tool down should the wheel get into a bind
Directed Air Flow

$146.75

Makita

9566CV

6 Inch Industrial Angle Grinder

12.0 Amp motor design, 4,000 - 9,000 RPM
Labyrinth construction seals motor & bearings from contamination
SJS - Super Joint System prevents tool kickback & gear damage
Electronic limiter stops the motor and prevents accidental burnout
"Tool-less" wheel guard adjustment for easy clamping
Protective zig zag varnish seals armature and field
Grinding Wheel: 6" - Wire Cup Brush: 3" - Sanding Disc: 6"
Spindle thread: 5/8" x 11 UNC - Net Weight 5.3 lbs.

$165.00

Bosch

1824E

5 Inch Small Angle Grinder with Electronics & Lock On Switch

12 Amp
No Load RPM 11,000
2-Position Vibration Control Handle Reduces vibration up to 60%, providing uncompromising user comfort for extended periods of work
Rear Handle Trigger with Lock-on/off switchFor extended use
Restart Protection Shuts the tool off should the power supply be interrupted
Constant Reponse Circuitry Provides soft start, constant speed under load and overload protection

$153.25

Bosch

1824ED

5 Inch Small Angle Grinder with Electronics

$154.50

DeWalt

D28140

6 Inch High Performance Cut-Off/Grinder

13.0 Amp AC/DC
Max Watts Out 1,700 W - No Load Speed 9,000 rpm
Use Wheels RPM Above 9,900 rpm
Spindle Lock Yes - Spindle Thread 5/8"-11
Tool Length 13" - Tool Weight 4.6 lbs
Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents
Dual Abrasion Protection provides increased motor protection from damaging dust and debris ingestion
Complete Electronic Controlprovides multiple advanced technology features such as E-Clutch, Power-Off and Power Loss Reset
Lock-on slide switch provides increased user comfort in extended use applications

$176.00

DeWalt

D28144

6 Inch High Performance Cut-Off/Grinder

13.0 Amp AC/DC
Max Watts Out 1,700 W - No Load Speed 9,000 rpm
Use Wheels RPM Above 9,900 rpm
Spindle Lock Yes - Spindle Thread 5/8"-11
Tool Length 13" - Tool Weight 4.6 lbs
Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents
Dual Abrasion Protection provides increased motor protection from damaging dust and debris ingestion
Complete Electronic Controlprovides multiple advanced technology features such as E-Clutch, Power-Off and Power Loss Reset
Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage

$176.00

DeWalt

D28144N

6 Inch High Performance Cut-Off/Grinder with No-Lock On Paddle Switch

13.0 Amp AC/DC
Max Watts Out 1,700 W - No Load Speed 9,000 rpm
Use Wheels RPM Above 9,900 rpm
Spindle Lock Yes - Spindle Thread 5/8"-11
Tool Length 13" - Tool Weight 4.6 lbs
Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents
Dual Abrasion Protection provides increased motor protection from damaging dust and debris ingestion
Complete Electronic Controlprovides multiple advanced technology features such as E-Clutch, Power-Off and Power Loss Reset
No-Lock On paddle switch prevents the user from locking the grinder on

$176.00

DeWalt

D28065

5 Inch / 6 Inch Rat Tail Angle Grinder

Amps: 13.0 Amps
Max Watts Out: 1,700 W
No Load Speed: 9,000 rpm
Use Wheels RPM Above: 9,900 rpm
Spindle Lock: Yes
Spindle Thread: 5/8"-11
Tool Length: 15.25 "
Tool Weight: 4.75 lbs

$193.00

DeWalt

D28065N

5 Inch / 6 Inch Rat Tail Angle Grinder (no lock on)

Amps: 13.0 Amps
Max Watts Out: 1,700 W
No Load Speed: 9,000 rpm
Use Wheels RPM Above: 9,900 rpm
Spindle Lock: Yes
Spindle Thread: 5/8"-11
Tool Length: 15.25 "
Tool Weight: 4.75 lbs

$193.00

Makita

BGA452

4-1/2 Inch 18V LXT Lithium-Ion Cordless Cut-Off/ Angle Grinder Kit

LXT Lithium-Ion battery
Makita built produces 50% faster grinding with an impressive 10,000 RPM
LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power)
45-minute Optimum Charger and battery communicates throughout the charging process using the built-in chip in the battery and built-in CPU chip in the charger. The Charger also uses "Active 3 Control" for current control, thermal control & voltage control.
More compact design at only 12-1/2" long and weighs only 5.6 lbs.

$316.50