Over 40,000 Hand and Power Tools.
|
Quality Tools at Discount Prices
Over 40,000 Hand and Power Tools. |
|
|
 |
Ph: 800-347-5096 Hours: M-F 6:30a - 4:30p (Pacific) | View Cart |
 |
 |
Home  Compare Tools Index Spline Shank Rotary Hammers |
 |
- Spline Shank Rotary Hammers |
|
Not sure which Rotary Hammer model is best for you? This compare page was designed to help you decide. Below is a comparison of the prices and features of each Spline Shank Rotary Hammer that we carry - listed in order of price from lowest to highest. Click on the product model number for additional information. If you need further assistance, please let us help. Call one of our tool experts at 1-800-347-5096 or email us. |
|
| Spline Shank Rotary Hammers | |||
|---|---|---|---|
 |
Makita
HR4041C 1-9/16 In. Spline Shank Rotary Hammer |
Dual Purpose: "Hammering Only" or "Rotation with Hammering"
12 Amps - Double insulated Electronic variable speed: 230-450 RPM, 1,300-2,600 Blows/Min. No hammering when idling - One-touch sliding chuck Side grip swivels 360° & adjusts to 8 positions forward and back Light indicates when to replace carbon brushes Includes tool case |
$396.75
|
 |
Makita
HR4040C 1-9/16 In. Spline Shank Rotary Hammer |
Dual Purpose: "Hammering Only" or "Rotation with Hammering"
9.6 Amps - Double insulated Electronic variable speed: 230-450 RPM - 1250-2500 Blows/Min. No hammering when idling - One-touch sliding chuck Side grip swivels 360° & adjusts to 8 positions forward and back Light indicates when to replace carbon brushes Soft start electronic switch: smooth starts, constant speed control Capacity: Concrete: 1-9/16" - With core bits: 4-1/8" Includes tool case |
$417.75
|
 |
Milwaukee 5318-21 1-1/2 In. Spline Shank Rotary Hammer |
Two-Modes: Hammer with Rotation and Hammer Only Powerful 11.0 Amp Motor with Electronic Feedback Control Circuit 385 RPM, 3,400 BPM Electronic Feedback Control Circuit "Soft-Shift" Stop Rotation Mode Selector Internal Clutch Slips When Bit Jams Single Motion Push-In Spline Bit Reception Extra large steel case holds 23 inch long bits 1-1/2 Inch Solid Bit Capacity - 6 In. Thin Wall Core Bit 4 In. Thick Wall Core Bit - 2-5/8 In. Tunnel Bit Capacity Includes Impact Resistant Carrying Case |
$422.75 |
 |
DeWalt D25550K 1-9/16 In. Spline Shank Rotary Hammer Kit |
11.0 Amps No Load Speed: 140-280 RPM Loaded Speed: 1330-2660 BPM Impact Energy: 7.3 ft/lbs Concrete Drilling: Yes Chipping: Yes Wood/Steel Drilling: Yes with adaptor Tool Length: 18.5" Tool Weight: 14.5 lbs Includes heavy-duty kit box |
$431.50 |
 |
Bosch
11247 1-9/16 In. Spline Combination Hammer |
Two-Modes: Rotary Hammer and Hammer Only
10 Amp No Load RPM 400 - No Load BPM 3000 Impact Energy (ft. lbs.) 5.2 Length 17.25" - Weight (lbs.) 13.6 Max. Hole Diameter in Concrete 1-9/16" Max. Hole Diameter in Concrete-Core Bit 4" Max. Hole Diameter in Concrete-Thru Hole Bit 2-1/2" Optimal Concrete Capacity Range 1/2 - 1-3/8" Includes Carrying Case |
$433.25
|
 |
DeWalt
D25551K 1-9/16 In. Spline Shank Rotary Hammer (with Bit Lock) Kit |
Same as above, but Rotary Hammer has Bit Lock | $437.75
|
 |
Makita
HR3851 1-1/2 In. Spline Drive Rotary Hammer (AC/DC) |
Two-Modes: Lever change from Rotary Hammer to Hammer Only
Hi-tech 10.0 Amp motor 240 RPM - 2900 BPM All ball and needle bearings for longer life Air cushion design for hard hitting fast drilling Factory grease packed for reduced maintenance Automatic brush cutoff to protect motor Capacity: Concrete: 1-1/2" - With core bits: 4-5/8" Double insulated Includes tool case |
$441.00
|
 |
Milwaukee
5321-21 1-1/2 In. Spline Shank Rotary Hammer |
Two-Modes: Hammer with Rotation and Hammer Only
Powerful Milwaukee 11.0 Amp Motor Dial Speed Control - 190-385 RPM, 1700-3400 BPM "Soft-Shift" Stop-Rotation Mode Selector Electronic Feedback Control Circuit Vibration Isolation System - Both handles "float" to absorb hammering action 10 Foot Quik-Lok Cord - For tangle-free carrying and storage Service Reminder Light Includes Impact Resistant Carrying Case |
$497.75
|
 |
Bosch
11248EVS 1-9/16 Inch Spline Combination Hammer |
Rating 120V Amperage 11.0 No Load RPM 170-340 No Load BPM 1,700-3,300 Impact Energy (ft. lbs.) 6.2 Normal ; 7.4 Turbo Length 17- 1/4" Weight (lbs.) 13.6 |
$572.00 |
|
Milwaukee 5321-22 1-1/2 In. Spline Shank Rotary Hammer Kit |
Two-Modes: Hammer with Rotation and Hammer Only Powerful Milwaukee 11.0 Amp Motor Dial Speed Control - 190-385 RPM, 1700-3400 BPM "Soft-Shift" Stop-Rotation Mode Selector Electronic Feedback Control Circuit Vibration Isolation System - Both handles "float" to absorb hammering action 10 Foot Quik-Lok Cord - For tangle-free carrying and storage Service Reminder Light Includes Carrying Case & 5-Piece Bit & Chisel Assortment |
$582.00 |
 |
DeWalt
D25650K 1.75 In. Spline Shank Rotary Hammer |
11.5 Amps
Concrete Drilling Yes No Load Speed 140-280 RPM Loaded Speed (bpm) 1330-2660 BPM Impact Energy 8 ft/lbs Chipping Yes Wood/Steel Drilling Yes with adaptor Tool Length 18.5" - Tool Weight 14.5 lbs Includes heavy-duty kit box |
$590.50
|
 |
Makita
HR5000 2 Inch Rotary Hammer, Spline Shank, AC/DC |
Two-Modes: Hammering Only or Rotation with Hammering
Powerful 11.0 Amp motor 260 RPM - 2100 BPM - Double insulated All ball and needle bearings Air cushion design for hard hitting fast drilling Factory grease packed for reduce maintenance Automatic brush cut-out system to protect motor Capacities: Concrete: 2" (5-7/8" with core bits) Includes tool case |
$740.75
|
 |
Milwaukee
5340-21 2 In. Spline Drive Rotary Hammer |
Two-Modes: Rotary Hammer & Hammer Only
Powerful 15.0 Amps Milwaukee Built Motor BPM & RPM - 975-1,950 BPM & 125-250 RPM Electrontic Feedback Control Circuit (EFCC) User Friendly Vibration Isolation System Variable Speed Control Dial Soft-Grip on All Handle Includes Carrying Case |
$888.75
|
| See other pages comparing:
Hammer-Drills, SDS Rotary Hammers, SDS-Max Rotary Hammers, Chipping & Demolition Hammers |
| What's the difference between a Hammer-Drill and a Rotary Hammer? |
 |
 |
Homepage |
Tool Search |
View Cart
|
FAX Order |
Tell
a Friend | Contact Us |
 |
|
|