|Ph: 800-347-5096 Hours: M-F 7:00am - 4:00pm (Pacific)|
|- Miter Saw Comparison|
|Miter Saws and Compound Miter Saws|
10 Inch Compound
Miter Saw - 15 Amp,
5,000 rpm motor
|Machined base fence support - Maintains fence alignment for accurate cuts
Cam miter lock - Quick and accurate miter table positioning
Left and right miter capacity - 0 - 52 degrees for greater versatility
Bevels -3 - 48 degrees - Increased cut capacity
Tall sliding fences - Supports crown molding vertically 4 1/2 inch and easily slides out of the way for bevel cuts
Stainless steel detent plate with 11 positive stops - Provides repeatable accuracy and jobsite duability
Lightweight 35lbs. Built-in carry handle - Easy portability
Laser compatible - Designed for use with DW7187 adjustable laser system
12 Inch Heavy-Duty
|15.0 Amp Motor
No Load Speed 4,000 rpm provides extended power and durability
Blade Diameter 12 inch
Arbor Size 5/8 inch or 1 inch
Vertical Capacity: Baseboard Against Fence 6-1/2 inch
Vertical Capacity: Crown Molding Vertically Nested 5-1/4 inch
Horizontal Capacity: Baseboard Lying Flat 8 inch
Horizontal Capacity: Crown Molding Lying Flat 6-1/2 inch
45° Bevel Cut Capacity (dimensional lumber) 2 inch x 8 inch
90° Cross-Cut Capacity (dimensional lumber) 4 inch x 6 inch
90° Cross-Cut Capacity (Max Width) 2 inch x 8 inch dimensional lumber. 45° Miter Cut Capacity (Max Height) 4 inch x 4 inch dimensional lumber. 45° Miter Cut Capacity (Max Width) 2 inch x 6 inch dimensional lumber
Tool Weight 42 lbs.
12 Inch Single Bevel
Compound Miter Saw
|15 Amp, 4300 RPM Motor-Professional power and performance. Ultimate One-handed Portability-With a compact design, comfortable one-handed rear carry handle and optimized center of gravity.
Category Best All-around Cut Capacity-6 inch max crown, 6-3/4 inch max base against fence, 2 inch x 8 inch at 0° and 2 inch x 6 inch at 45° cross cut for professional applications.
Squarelock™ Quick-Release Fences: High-precision Squarelock fence aligns 90° to table and requires no adjustment; One-touch lock/unlock to slide fence for added support. Integrated workpiece supports-Expand to nearly 37 inch for the highest material support in category.
Quick-Reach Bevel Lock-Located on the side of the bevel post for quick an easy adjustments. Large Easy-to-read Uniform Bevel and Miter Sacles-52° R/L miter capacity with marked detents, 47°L/-2° R Bevel Capacity. 33.9°, 45°, 47° and -2° Bevel Stops-For accurate cuts at the most common bevel angles.
Nine Adjustable Miter Detents-at 0°, 15°, 31.6°, 22.5°, 45° L/R. Push-button Miter Detent Override - Easy-to-access thumb actuated control right up front for fine miter angle adjustment. Ergonomic ambidextrous Trigger Handle -Form fitting handle provides comfort for all day use.
12 Inch Compound
|Powerful 15.0 Amp motor delivers 4,000 RPM
Powerful 15 Amp motor, 3.3 max. tool HP
Crown miting detents 31.6° Miter and 33.9° Bevel detents for quick, accurate, crown cuts
Large 25 inch aluminum base with 3-1/4 inch sliding extension for 28-1/4 Inch total length provides extra support
Tall 5-1/8 Inch sliding fence For easy bevel setups and increased crown molding cutting capacities
Speed-track sliding fence system Base and fence slide independently
Bevel Stops 0 degrees, 33.9 degrees, 45 degrees
12 Inch Heavy-Duty
|15.0 Amp, 3,600 rpm motor.
Adjustable stainless steel miter detent plate with 11 positive stops.
Precise Miter System and Machined Base Fence Support.
Tall sliding fences support crown molding up to 6-5/8 inch nested and base molding up to 6-1/2 inch vertically against the fence while easily sliding out of the way for bevel cuts.
Innovative gearbox and belt-drive design increases vertical cutting capacity.
Double bevel design allows saw to bevel left and righ.
Exclusive Back Fence Design Cuts 2 x 10 dimensional lumber at 90° and 2 x 8 at 45°.
0-50° left and right miter capacity for greater versatility .
Lightweight (44 lbs.), head lock-down pin, and built-in carrying handle for increased portability .
Cam lock miter handle with detent override deliver quick and accurate miter angles .
10 In. Double-Bevel
| Amps: 15 Amps
No Load Speed: 4,000 rpm
Blade Diameter: 10 inch
Arbor Size: 5/8 inch
Vertical Capacity: Baseboard Against Fence: 6 inch Left - 3-1/2 Right. Vertical Capacity: Crown Molding Vertically Nested: 6 1/4 inch. Horizontal Capacity: Crown Molding Lying Flat: 10-3/4 inch
45° Bevel Cut Capacity (dimensional lumber): 2 x 2
90° Cross-Cut Capacity (dimensional lumber): 12 inch
90° Cross-Cut Capacity (Max Width): 14 inch Special Set Up
45° Miter Cut Capacity (Max Height): 4 inch
45° Miter Cut Capacity (Max Width): 8 inch
Tool Weight: 51 lbs
10 Inch Single-Bevel
Slide Miter Saw with
|Up-Front Controls - Exclusive feature provides easy and efficient access to miter and bevel angle settings. Quick Release Fence - For fast and easy adjustment.
Dual Workpiece Supports - Extends material support from 21 Inch (53.3 cm) to 36 Inch (91.4 cm). Exclusive Wedge-and-Slot Miter Detent System-Consistent and precise miter angles over the life of the tool. High Visibility Bevel and Miter Scales - For easy setting of accurate bevel and miter angles.
Crown miter detents - 31.6° Miter and 33.9° Bevel detents for quick, accurate, crown cuts. Miter Detent Override - For easy setting of any neighboring angle. Soft-grip Horizontal Handle with Ambidextrous Lockout - For comfortable repetitive cuts. Spindle lock - For fast easy blade changes
12 In. Dual-Bevel Slide
Miter Saw with
| Up-Front Bevel Lock Lever and Range Selector Knob — Easily-accessed controls for quick and accurate bevel settings
Multi-Position Main Handle — Easily locks into any of four positions for optimum comfort and control
Large 25-1/2 inch Base with Built-In Cast Sliding Extensions for 40 inch total length
Tall 4-1/2 inch Speed-Track Sliding Fences — For easy bevel set-ups and increased crown molding cutting capacities
Built-in Length Stop — For quick repetitive cuts of the same length
Easily Readable Bevel and Miter Scales — For easy setting of accurate bevel and miter angles
Exclusive Wedge-and-Slot Miter Detent System — Consistent and precise miter angles over the life of the tool
Miter Detent Override — For fast and precise angle adjustment
Crown Molding Settings — 31.6° miter and 33.9° bevel detents for quick, accurate crown cuts
Dual Sliding Rail Design — For superior accuracy
Electric brake — For quick, repetitive cuts. Stops blade in seconds
12 Inch Heavy Duty Dual
Bevel Sliding Compound
|Powerful 15.0 Amp, 3.3 Max HP Direct Drive Motor- provides increased power for high performance cutting in hard lumber
Miter Angle Digital Readout - provides repeatable accuracy to 0.1°
Miter Angle Fine Adjust with Detent Override- makes it simple to dial-in precise miter angles
Dual Integral Jobsite Lights- fully illuminate the work piece and cut line from either side of the blade
Oversized Single Lever Bevel Adjustment with (9) Positive Bevel Stops allows the saw to easily bevel left and right 0°- 48° and provides fast and accurate adjustments
Dual Horizontal Steel Rails with Three Large Linear Bearings-deliver smooth sliding action
|| Homepage | Tool Search | | FAX Order | Tell a Friend| Contact Us | Report Errors with this page ||
|Sales/Info 800-347-5096||4730 W. Spring Mountain Road, Suite B, Las Vegas, Nevada 89102||FAX (702) 871-1842|