Delta Ram Type Radial Drill Presses

Delta Ram Type Radial Drill Presses
Model 15-126

Delta Ram Type Radial Drill Presses
15-126	1/2 HP, 230/460V, Three Phase Ram Type Radial Drill Press	$11211.00
15-127	1/2 HP, 115/230V, Single Phase Ram Type Radial Drill Press	$11445.75

• VERY LOW SHIPPING COST ON THESE ITEMS! (see box below)

Delta Ram Type Radial Drill Presses

Features of Ram Type Radial Drill Presses:

Ram Type Radial Drill Presses come with 6" spindle travel, No. 2 MT spindle, 42" column, 65-863 floor stand, head, jack shaft assembly, ram, cradle, column, table, raising mechanism, belt guards, motor pulley, 49-287 V-belt, 49-105 V-belt, motor and controls.

The Delta Difference:
• Gives you machine tool capacity and performance combined with power tool adaptability and versatility.
• Extra drilling capacity allows you to take the drill right to the work. Tilt it up to 45-degrees right or left, swivel the head 360° for operations either on or off the table.
• Built in jack shaft assembly provides 16 different speeds from 175 rpm to 8200 rpm.
• 42" column for extra spindle nose to table capacity and a big 6" quill stroke with a ram travel of 17".
• Head tilts a full 45° right or left with easy-to-read head tilt angle scale that permits setting of head at exact angle. Double locks on each side to securely lock head to prevent angle deviation under heavy loads.
• Convenient controls for extra operating ease features a quill lock knob, two quill wear adjustment screws and an adjustable quill return spring.
• Big cast-iron machined table has four T-slots and oil trough tapped to accommodate 1/2" pipe.

Do you have questions about any of these products? Chat LIVE with one of our tool specialists.
Mon. - Fri., 6:30 a.m. - 4:30 p.m. Pacific Time or call us at 800 347-5096

Specifications for Delta 15-126 & 15-127
Motor For 15-127:1/2 HP, 115/230V, single phase, 60 Hz For 15-126:1/2 HP, 230/460V, three phase, 60 Hz Motor Control For 15-127: Push button station, magnetic starter, transformer and 3-leg overload protection (LVC) For 15-126: Push button station, magnetic starter, transformer and overload protection (LVC) Spindle Speed with 1725 RPM Motor 175, 365, 380, 600, 695, 765, 1030, 1250, 1380, 1450, 2200, 2600, 2800, 4000, 4750, 8200 rpm Table Working Surface 26" x 18" Base Working Surface 13 1/2" x 13 1/2" Table Tilt 90°, 45° left, vertical, 45° right	Column Diameter 3 3/4" Spindle and Chuck Taper Jacobs 33 Quill Diameter: 1 13/16" Stroke: 6" Capacities Key Chuck: 1/2" Chuck to table: 24 3/16" max. Max. dia. hole in steel: 3/8" Max. dia. hole in cast-iron: 1/2" Overall Dimensions Height: 86" Width: 33" Front to rear: 58" Weight 778 lbs.

Shipping Information:

LOW Shipping for this item! This item cannot be shipped by UPS. It will ship by common carrier. For questions about shipping, call us at 1-800 347-5096 or email us.

Delta Main Index


		Homepage \| Tool Search \| View Cart \| FAX Order \| Tell a Friend \| Contact Us

Sales/Info 800-347-5096

FAX (702) 871-2815