Delta Industrial 15" Drill Presses

Delta 15 In. Drill Press, 6 Stroke - Model 15-220

Delta Industrial 15 Inch, 6 Inch Stroke Drill Presses

Delta 15-220 - 15-343 Features:

Complete 15" Production Drill Presses, 6" Stroke. All models include belt and pulley guard, belt and motor pulley (supplied with 5/8" bore unless 1/2" bore is specified), self-locking depth stop, depth gage, 65 -104 self-ejecting chuck key, motor and controls. Floor models include No. 15-010 Safety Collar for head. Production-table floor models include No. 15-008 Table Raising Mechanism.

The Delta Difference

• Extra-large spindle bearings "6 PLUS 6" and "VS6" spindle and spindle pulley are supported by four over-sized, pre-loaded, lubrcated-for-life ball bearings. Massive quill is a full 2" diameter. "VS6" has the same excellent construction, PLUS an extra bearing below the spindle pulley. This fine combination of features assures freedom from chatter, long, maintenance-free life and maximum pressure at the drill point.

• Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450 to 4700 rpm with a 1725 rpm motor and 300 to 3100 with an 1140 rpm motor.

• Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring loaded, rubber-tipped plunger that quickly restores correct belt tension.

• Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling... PLUS, the extra stroke reqquired for clearing jigs and fixtures.

•Six speeds offer unbelievably wide range of speeds with a low-cost 1725 rpm motor- 425, 600, 1100, 2050, 3900 and 5500 rpm- 11.8 to 1 speed ratio. You can choose an extra-slow speed for drilling very hard materials... an extra-fast speed for working soft materials... or an optimum speed for any size bit material.

• Efficient variable-speed drive lets you select any spindle speed instantly while machine is running. A self-locking cam, plus a "snubber" feature, hold speed settings constant under all load conditions. Proper belt tension is automatically maintained for full power transmission.

Specifications for Delta 15-220 - **15-343**
CAPACITIES: Key chuck (w/std. Jacobs #33 taper): 1/2" (13 mm) Diameter hole in cast iron: 5/8" (16 mm) Diameter hole in steel: 1/2" (13 mm) QUILL: Stroke: 6" (152 mm) Diameter: 2" (51 mm) Spindle Speeds ("6 PLUS 6"): With 1725 rpm motor: 425, 600, 1100, 2050, 3900 and 5500 rpm With 1140 rpm motor: 280, 395, 725, 1355, 2575 and 3635 rpm SPINDLE SPEEDS ("VS6"): With 1725 rpm motor: 450 to 4700 rpm With 1140 rpm motor: 300 to 3100 rpm COLUMN: Wall thickness: 5/32" (4 mm) Diameter: 2 3/4" (70 mm) TABLE TILT: Standard: 90° L and R TABLE-WORKING SURFACE, GROUND: Standard: 11" X 14" (279 X 356 mm) Production (overall): 15 1/2" X 21 1/2" (394 X 546 mm) Production (inside of coolant trough): 12" X 18" (305 X 457 mm) BASE WORKING SURFACE: Bench-type, ground, (9/16" T-slots on 8" centers): 10 1/4" X 12 3/4"(260 X 324 mm) Bench-type, ground, (with coolant trough): 14" X 16"(356 X 406) Floor-type, 9/16"(14.29 MM) T-slots on 8"(203.2 mm) centers: 11 1/4" X 14"(286 X 356 mm) NOTE: Single-phase electricals will be supplied wired for 115 V unless 230 V is specified. Three-phase electircals will be supplied wire dor 230 V unless 460 V is specified.	OVERALL DIMENSIONS: Bench model (with tilting table): Height: "6 PLUS 6"-40" (1016 mm) "VS6"-42 1/2"(1080 mm) Width: 14"(356 mm) Front to rear: "6 PLUS 6"-25 1/8"(638 mm) "VS6": 217 7/8"(708 mm) Floor model: Height: "6 PLUS 6"-71 1/2"(1816 mm) "VS6"-74"(1880 mm) Width (tilting table): 15 1/2"(394 mm) Width (production table): 21 1/2"(546 mm) Front to rear: "6 PLUS 6"-26"(660 mm) "VS6" 26 7/8"(708 mm) MOTOR: Accomodates NEMA 56 frame motors. Quill Tavel: 6" Step Pulley or Var. Speed: According to model. Weight: 167-283 Lbs. Motor Control: 24V Push-Button Station, Magnetic Starter, Transformer and Overload Protection (LVC) or push-button switch only depending on model. Motor Enclosure: TEFC Hertz And Motor rpm: 60-1725 NOTE: Power cord and plug supplied for single-phase only. Motors and Motor Controls may be ordered unmounted. Variable-speed models are furnished only with electricals factory munted and wired, ready to run.

Delta 15 Inch Drill Presses
Model	Type	Motor Control	Motor	Price	Order
15-231	Floor Model Std. Tilting Table 6 Step Pulley	Push-Button Switch Only	Single Phase 3/4 HP 115/230V	$2876.25
15-232	Floor Model Std. Tilting Table 6 Step Pulley	24V Push-button station, Magnetic Starter	Single Phase 3/4 HP 115/230V	$3345.75
15-233	Floor Model Std. Tilting Table 6 Step Pulley	24V Push-button station, Magnetic Starter	Three Phase 3/4 HP 230/460V	$3345.75
15-234	Floor Model Std. Tilting Table 6 Step Pulley	24V Push-button station, Magnetic Starter	Three Phase 3/4 HP 200V	$3463.25
15-261	Floor Model Prod. Tilting Table 6 Step Pulley	Push-Button Switch Only	Single Phase 3/4 HP 115/230V	$3228.50
15-331	Floor Model Std. Tilting Table Variable Speed	Push-Button Switch Only	Single Phase 3/4 HP 115/230V	$3228.50
15-332	Floor Model Std. Tilting Table Variable Speed	24V Push-button station, Magnetic Starter	Single Phase 3/4 HP 115/230V	$3874.00
15-333	Floor Model Std. Tilting Table Variable Speed	24V Push-button station, Magnetic Starter	Three Phase 3/4 HP 230/460V	$3874.00
15-334	Floor Model Std. Tilting Table Variable Speed	24V Push-button station, Magnetic Starter	Three Phase 3/4 HP 200V	$3991.50
15-341	Floor Model Prod. Tilting Table Variable Speed	Push-Button Switch Only	Single Phase 3/4 HP 115/230V	$3639.25
15-342	Floor Model Prod. Tilting Table Variable Speed	24V Push-button station, Magnetic Starter	Single Phase 3/4 HP 115/230V	$4226.25
15-343	Floor Model Prod. Tilting Table Variable Speed	24V Push-button station, Magnetic Starter	Three Phase 3/4 HP 230/460V	$4343.75

Do you have questions about any of these products?
Chat LIVE with one of our tool specialists.
Mon. - Fri., 6:30 a.m. - 4:30 p.m. Pacific Time or call us at 800 347-5096

Shipping Information:

LOW Shipping for these items! These items cannot be shipped by UPS. It will ship by common carrier. For questions about shipping, call us at 1-800 347-5096 or email us.

Delta Main Index


		Homepage \| Tool Search \| View Cart \| FAX Order \| Tell a Friend \| Contact Us

Sales/Info 800-347-5096

FAX (702) 871-2815