Delta 6 Inch Belt/12 Inch Disc Finishing Machine - Model 31-735B
Includes:
- 1-1/2 HP, 200-230/460V, 60 Hz, 3,450 RPM
three phase TEFC motor with 24V push-button station
- Magnetic starter
- Transformer
- 3-leg overload protection (LVC)
- (2) Tilting tables
- 4-1/2" arbor pulley
- Guard for arbor pulley
- V-belt
- 80-grit aluminum oxide belt
- 50-grit aluminum oxide disc
|
| Delta 6 Inch Belt/12 Inch Disc Finishing Machine, 3 Phase |
| 31-735B |
$1763.24
FREE SHIPPING! |
|
| Features: |
Sands smoothly and efficiently from start to finish.
- Handles 90 to 95% of your finishing operations
- 4" dust port can be used with the micron bag provided or can be attached to a standard 4" dust collection system and built-in dust collector fan that collects dust from the body of the machine and exhausts into the bag. 5 micron bag
provided but is not intended for metal dust collection, but is for wood sanding only
- Integrated mobile base for ease of mobility
- The right speeds make it well suited for both metal and wood shops
- Belt operates at any angle - vertically, horizontally or any degree in between
- Large tables are scientifically ribbed to prevent distortion
- Furnished with sliding pivot pin for circle sanding
- **3 phase electrical will be supplied wired for 230V, unless 460V is specified. Power cord and plug supplied for single phase only. Motors and motor controls may be ordered unmounted
|
| Specifications: |
- Motor: 3 Phase, 1-1/2 HP, 200-230/460V (wired 200-230V), 60 Hz, 3,450 RPM
- Abrasive Belt Size: 6" x 48"
- Speeds:
- Belt speed: 3,000 SFPM
- Disc Speed: 2,100 SFPM
- Table Size:
- Belt Table: 15" x 7-1/2"
- Disc Table: 16-1/2" x 12"
- Miter Gauge Groove: 3/8" x 3/4"
- Table Tilt:
- Belt: Tilts 45° down and 20° up
- Disc: Tilts 45° down and 20° up
- Dust Port Diameter: 4"
- Sanding Drum: NA
- Width: 35"
- Length: 21"
- Height: 58"
- Weight: 365 lbs
- Shipping Weight: 433 lbs
|
|
Delta Tools 
