| Table Saw Accessory-General |
 |
34-868 |
Disappearing Splitter With anti-kickback fingers it provides protection for all sawing operations, disappears below table for dadoing and other non-thru cutting jobs |
$138.49 |
|
 |
34-976 |
UNIGUARD Blade Guard Fits DELTA 10" Tilting Arbor Saw (shown), DELTA UNISAW and DELTA 10" CONTRACTOR SAWS with 30" or 52" UNIFENCE Saw Guide or just about any other table saw base |
$309.74 |
|
 |
36-T30 |
30" DELTA T2 Fence System for Contractor's Saw - fence, rail and guide tubes |
$181.99 |
|
 |
50-289 |
Mobile Bases and Extensions (Use with: For UNISAWS with 50"/52" Fences) |
$180.74 |
|
 |
50-302 |
Outfeed Table Fits DELTA UNISAW Tilting Arbor Saws and may be easily adapted to fit most other comparable cabinet-type table saws |
$218.49 |
|
 |
78-101D |
42 Inch DBL PTR Fence (DG II) |
$246.99 |
|
|
78-201E |
48 Inch DBL PTR Fence (DG II) |
$250.74 |
|
 |
78-130 |
BIESEMEYER Commercial 30in Rail |
$147.99 |
|
 |
78-150 |
BIESEMEYER Commercial 50in Rail |
$246.99 |
|
 |
78-200 |
42" BIESEMEYER Commercial Fence with One Pair of Steel Support Legs |
$283.24 |
|
| |
78-411 |
26 Table Mount Blade Guard System |
$457.74 |
|
| |
78-412 |
38 Table Mount Blade Guard System |
$463.49 |
|
 |
78-413 |
50 Table Mounted Blade Guard System (without Anti-Kickback Splitter) for 10" Blade Saws |
$468.49 |
|
 |
78-414 |
62 Table Mounted Blade Guard System for 10" Blade Saws |
$494.49 |
|
| |
78-423 |
50 Floor Mount Blade Guard System 10" |
$630.74 |
|
| |
78-424 |
62 Floor Mount Blade Guard System 10" |
$675.49 |
|
 |
78-431 |
BIESEMEYER Anti-Kickback Spreader For Left-Tilt UNISAW |
$155.74 |
|
| |
78-440 |
Anti-kickback Spreader for Powermatic 66 (pre 1978 & after 8/2000) |
$141.24 |
|
 |
78-441 |
Anti-kickback Spreader for Powermatic 66 models manufactured between 1979 to August 2000 |
$141.24 |
|
| |
78-442 |
Anti-kickback Spreader Powermatic 72 |
$151.24 |
|
| |
78-453 |
Anti-kickback spreader for Jet TAS-10 Left Blade Tilt |
$141.24 |
|
 |
78-722 |
Gang Stop, Right Hand for 12" Wide Table |
$207.24 |
|
 |
78-804 |
4' Miter Table System for 10" Saws |
$201.49 |
|
|
78-806 |
6' Miter Table System For 10" Saws |
$227.49 |
|
 |
78-808 |
8' BIESEMEYER 5-1/2" Wide Miter Table For 10" Miter Saws |
$279.49 |
|
 |
78-955 |
BIESEMEYER T-SQUARE Blade Guard System |
$572.74 |
|
 |
78-958 |
Table Mount Blade Guard Fits 12"-14"(305-356mm) System for Commercial 50" Fence System |
$559.49 |
|
 |
78-960 |
BIESEMEYER T-SQUARE Table Saw Blade Guard System |
$562.74 |
|
 |
78-961 |
Anti-kickback Spreader for DELTA Right Tilt UNISAW & Grizzly 1023 |
$137.74 |
|
 |
78-963 |
Anti-kickback spreader for DELTA Tilting Arbor & CONTRACTOR'S SAW |
$147.49 |
|
 |
78-968 |
Anti-kickback Spreader for DELTA 12"/14" Saw |
$240.49 |
|
 |
78-969 |
Rear Support Table |
$283.49 |
|
 |
78-987 |
Gang Stop, Left Hand for 12" Wide Table |
$207.24 |
|
 |
78-988 |
Gang Stop, Left Hand for 16" Wide Table |
$210.24 |
|
 |
78-992 |
Dual Pointer Flip Stop |
$168.99 |
|
 |
BC30 |
BIESEMEYER Commercial Systems (Includes 42" fence and rails for 30" right and 12" left of blade cutting capacity (78-200 and 78-130)) |
$411.99 |
|
 |
BC50 |
BIESEMEYER Commercial Fence System (Includes 42" fence and rails for 50" and 12" left of the blade cutting capacity (78-200 and 78-150)) |
$483.49 |
|
Delta Auxiliary Fence
Model 78-940 |
| Delta Auxiliary Fence |
| 78-940 |
$214.49 |
|
| Features: |
- Accessory to all BIESEMEYER fences.
- Protects and extends the versatility of the BIESEMEYER fence.
- Constructed with aluminum "L" brackets and steel clamps.
- Board is 1" melamine with black edge-banding.
- Increases the height and length of your fence when cutting larger stock.
|
| Specifications: |
- Length: 44"
- Width Capacity: 3.75-4"
- Height: 4.5"
|
|
| Back to Top |
|
Delta Universal Tenoning Jig
Model 34-184 |
| Delta Universal Tenoning Jig |
| 34-184 |
$181.49 |
|
| Features: |
- Universal miter bar for use with all table saws with 3/8" x 3/4" miter slots
- Quick-Release coarse adjustment
- Micro Adjustment to .004"
- Ergonomic Handles
- Use with all table saws with 3/8" x 3/4" miter slot
|
|
| Back to Top |
|
Delta 36" Biesemeyer Rail and Tube
Model 78-138B |
| Delta 36" Biesemeyer Rail and Tube |
| 78-138B |
$197.99 |
|
| Specifications: |
- 36" Black precision fence-rails
- 36" Black precision fence-tube
|
| Includes: |
- Delta Model 78-138B 36" Front Rail, Front Fence Tube, Rear Rail.
|
|
| Back to Top |
|
Delta 42 Inch Commercial Fence
Model 78-902 |
| Delta 42" Commercial Fence |
| 78-902 |
$216.99 |
|
| Features: |
- Easily fits off for left-hand cutting.
- Fence body constructed from .083 gauge steel.
- Laminated 9-ply Birch plywood sides are durable and do not mar easily.
- Simple and secure 3-point locking design.
- Cam handle incorporates magnets to keep it in an upright position when not in use.
- Locking the fence on the front of the saw eliminates binding.
- Accurate repeatability, eliminating the need for using a hand-held tape to square and set the fence.
- Little maintenance required.
- Virtually all working components are replaceable.
- The precision of the fence and the ease of its use reduces wasted material caused by inaccurate cuts.
|
| Specifications: |
- Length: 42"
- Width Capacity: 4"
- Height: 2.5"
- Weight: 29 lbs
|
|
| Back to Top |
|
Delta 52" Biesemeyer Rail and Tube
Model 78-055B
|
| Delta 52" Biesemeyer Rail and Tube |
| 78-055B |
$252.74 |
|
| Specifications: |
- 52" Black precision fence-rails
- 52" Black precision fence-tube
|
| Includes: |
- Delta Model 78-055B 52" Front Rail, Front Fence Tube, Rear Rail.
|
|
| Back to Top |
|
Delta 52 Inch Biesemeyer
Fence Table Board - Model 78-918B |
| Delta 52" Biesemeyer Fence Table Board |
| 78-918B |
$272.99 |
|
| Specifications: |
- Constructed of hardwood alder frame & laminated particle board.
- Laminated on three sides. Backer board underside.
|
| Includes: |
- The 78-918B includes 52" Biesemeyer Fence Table Board.
|
|
| Back to Top |
|
Delta Biesemeyer Fence Head
Model 78-919B |
| Delta Biesemeyer Fence Head |
| 78-919B |
$307.24 |
|
| Features: |
- Fence body constructed from .083 gauge steel.
- The 9-ply fence faces are manufactured to unmatched tolerances.
- Accurate repeatability, eliminating the need to use a hand-held tape to square and set fence.
- A durable layer of heavy duty laminate is added to reduce friction.
|
| Includes: |
- The 78-919B includes Biesemeyer Fence Head.
|
|
| Back to Top |
|
| No image available |
| Delta Table Mounted Blade Guard System for 12" & 14" Blade Saws |
| 79-414 |
$563.99 |
|
| Features: |
- Adjusts 60" to 71" right of the blade.
- See-through blade guard hood with dust port.
- Counterbalance that permits weight adjustment.
- Adjustable boom to accommodate different right hand cutting capacities.
- Attaches to the back rail of a BIESEMEYER fence system.
- Fits most 12"/14" Table Saws within a cutting capacity range of 60"-71".
|
|
Delta Tools 
Find it Fast!