DeWalt Heavy-Duty 4-1/2 In. (115mm) 7 amp Small Angle Grinder
|
$61.25 |
| D28110 |
|
- 7.0 Amp AC/DC, 11,000 rpm motor designed for faster material removal and higher overload protection
- Quick-change wheel release provides easier and quicker wheel removal without the need for a wrench
- Low profile jam-pot gear case increases durability and allows tool to fit into tight spaces
- Oversized, protected spindle lock button provides easier and quicker wheel changes
- 2-position removable side handle provides increased comfort and control
- Slim, ergonomic body design provides increased comfort in extended use applications
- 5/8"-11 spindle thread accepts a wide range of 4-1/2" accessories
- Amps 7.0
- Max Watts Out 800 W
- No Load Speed 11,000 rpm
- Use Wheels RPM Above 12,000 rpm
- Spindle Lock Yes
- Spindle Thread 5/8"-11
- Tool Length 10-3/4"
- Tool Weight 4.1 lbs
2-position side handle, depressed center wheel, adjustable guard wrench
|
|

 |
| Compare to Other Brands |
|
DeWalt Heavy-Duty 4-1/2 In. (115mm) 10 amp Small Angle Grinder
|
$91.00 |
| D28112 |
|
- 10.0 Amp AC/DC 11,000 rpm motor designed for faster material removal and higher overload protection
- Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents
- Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces
- One piece brush arm prevents brush hang-up due to dust ingress
- Quick-change wheel release provides tool free wheel removal
- Keyless adjustable guard provides tool free guard adjustment thus increasing productivity
- Vibration reducing removable side handle provides user comfort and reduces user felt vibration
- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
- Oversized, protected spindle lock button provides easier and quicker wheel changes
- Lock-on slide switch provides the user comfort in extended use applications
- Matching wheel flange sallow the use of common accessories
- Amps 10.0
- Max Watts Out 1,200 W
- No Load Speed 11,000 rpm
- Use Wheels RPM Above 12,000 rpm
- Spindle Lock Yes
- Spindle Thread 5/8"-11
- Tool Length 11-1/4"
- Tool Weight 4.6 lbs
2-position side handle, depressed center wheel, keyless adjustable guard, wrench
|
|

 |
| Compare to Other Brands |
|
DeWalt 4 1/2 In. High Power Small Angle Grinder
|
$139.75 |
| D28115 |
|
- 13.0 Amp/2.3HP, 9,000 rpm DEWALT built G55 (AC/DC) motor designed for faster material removal and higher overload protection
- Dust Ejection System™ provides increased durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents
- Quick-Change wheel release provides tool free wheel removal
- Dual abrasion protection provides increased motor protection from damaging dust and debris ingestion
- One piece brush arm prevents brush hang-up due to dust ingestion
- Vibration reducing two position side handle provides user comfort and reduces user felt vibration
- Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces
- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
- Keyless adjustable guard provides tool free guard adjustments increasing productivity
- Amps: 13.0 Amps
- Max Watts Out: 1,700 W
- No Load Speed: 9,000 rpm
- Use Wheels RPM Above: 9,900 rpm
- Spindle Lock: Yes
- Spindle Thread: 5/8"-11
- Tool Length: 15.25 "
- Tool Weight: 4.75 lbs
2 position side handle, 5" keyless adjustable guard, wrench
|
|

 |
| Compare to Other Brands |
|
DeWalt 4 1/2 In. -5 In. HP SAG w/Trigger Grip
|
$139.75 |
| D28115N |
|
- 13.0 Amp/2.3HP, 9,000 rpm DEWALT built G55 (AC/DC) motor designed for faster material removal and higher overload protection
- Dust Ejection System? provides increased durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents
- Quick-Change wheel release provides tool free wheel removal
- Dual abrasion protection provides increased motor protection from damaging dust and debris ingestion
- One piece brush arm prevents brush hang-up due to dust ingestion
- Vibration reducing two position side handle provides user comfort and reduces user felt vibration
- Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces
- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
- Keyless adjustable guard provides tool free guard adjustments increasing productivity
- Amps: 13.0 Amps
- Max Watts Out: 1,700 W
- No Load Speed: 9,000 rpm
- Use Wheels RPM Above: 9,900 rpm
- Spindle Lock: Yes
- Spindle Thread: 5/8"-11
- Tool Length: 15.25 "
- Tool Weight: 4.75 lbs
2 position side handle, 5" keyless adjustable guard, wrench
|
|

 |
| Compare to Other Brands |
|
DeWalt Heavy-Duty 4-1/2 In. (115mm) 10 amp Small Angle Grinder
|
$91.00 |
| D28402 |
|
- 10.0 Amp AC/DC 11,000 rpm motor designed for faster material removal and higher overload protection
- Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents
- Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces
- One piece brush arm prevents brush hang-up due to dust ingress
- Quick-change wheel release provides tool free wheel removal
- Keyless adjustable guard provides tool free guard adjustment thus increasing productivity
- Vibration reducing removable side handle provides user comfort and reduces user felt vibration
- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
- Oversized, protected spindle lock button provides easier and quicker wheel changes
- Paddle switch lock-off provides the user protection from accidental start up
- Matching wheel flange sallow the use of common accessories
- Amps 10.0
- Max Watts Out 1,200 W
- No Load Speed 11,000 rpm
- Use Wheels RPM Above 12,000 rpm
- Spindle Lock Yes
- Spindle Thread 5/8"-11
- Tool Length 11-1/4"
- Tool Weight 4.6 lbs
2-position side handle, depressed center wheel, keyless adjustable guard, wrench
|
|

 |
| Compare to Other Brands |
|
DeWalt Heavy-Duty 4-1/2 In. (115mm) 10 amp Small Angle Grinder w/ No Lock-On
|
$91.00 |
| D28402N |
|
- 10.0 Amp AC/DC 11,000 rpm motor designed for faster material removal and higher overload protection
- Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents
- Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces
- One piece brush arm prevents brush hang-up due to dust ingress
- Quick-change wheel release provides tool free wheel removal
- Keyless adjustable guard provides tool free guard adjustment thus increasing productivity
- Vibration reducing removable side handle provides user comfort and reduces user felt vibration
- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
- Oversized, protected spindle lock button provides easier and quicker wheel changes
- No Lock-On paddle switch lock-off provides the user protection from accidental start up
- Matching wheel flange sallow the use of common accessories
- Amps 10.0AC/DC
- Max Watts Out 1,200 W
- No Load Speed 11,000 rpm
- Use Wheels RPM Above 12,000 rpm
- Spindle Lock Yes
- Spindle Thread 5/8"-11
- Tool Length 11-1/4"
- Tool Weight 4.6 lbs
2-position side handle, depressed center wheel, keyless adjustable guard, wrench
|
|

 |
| Compare to Other Brands |
|
DeWalt Heavy-Duty 4-1/2 In. (115mm) 10 amp Small Angle Grinder Kit
|
$89.00 |
| D28402K |
|
- 10.0 Amp AC/DC 11,000 rpm motor designed for faster material removal and higher overload protection
- Dust Ejection System provides durability by ejecting dust and debris particles that enter the tool through the air intake vents
- Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces
- One piece brush arm prevents brush hang-up due to dust ingress
- Quick-change wheel release provides tool free wheel removal
- Keyless adjustable guard provides tool free guard adjustment thus increasing productivity
- Vibration reducing removable side handle provides user comfort and reduces user felt vibration
- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
- Oversized, protected spindle lock button provides easier and quicker wheel changes
- Paddle switch lock-off provides the user protection from accidental start up
- Matching wheel flange sallow the use of common accessories
- Amps 10.0
- Max Watts Out 1,200 W
- No Load Speed 11,000 rpm
- Use Wheels RPM Above 12,000 rpm
- Spindle Lock Yes
- Spindle Thread 5/8"-11
- Tool Length 11-1/4"
- Tool Weight 4.6 lbs
2-position side handle, depressed center wheel, keyless adjustable guard, wrench, heavy-duty kit box
|
|

 |
| Compare to Other Brands |
|
DeWalt Heavy-Duty 4-1/2- 5 In. High Performance Grinder
|
$138.75 |
| D28114 |
|
- 13.0 Amp/2.3HP, 11,000 rpm DEWALT built G55 (AC) motor designed for faster material removal and higher overload protection
- Dust Ejection System provides increased durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents
- Quick-change wheel release provides tool free wheel removal
- Dual abrasion protection provides increased motor protection from damaging dust and debris ingestion
- One piece brush arm prevents brush hang-up due to dust ingestion
- Complete Electronic Control provides multiple advanced technology features such as E-Clutch , Power-Off and Power Loss Reset
- E-Clutch shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor
- Power-Off overload protection shuts the tool off before it reaches overload or burn-up
- Power-Loss Reset prevents accidental re-starts following a power disruption when the tool is left in the "on" position
- Vibration reducing two position side handle provides user comfort and reduces user felt vibration
- Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces
- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
- Keyless adjustable guard provides tool free guard adjustments increasing productivity
- Amps 13.0
- Max Watts Out 1,700 W
- No Load Speed 11,000 rpm
- Use Wheels RPM Above 12,000 rpm
- Spindle Lock Yes
- Spindle Thread 5/8"-11
- Tool Length 13"
- Tool Weight 4.6 lbs
2-position side handle, depressed center wheel, keyless adjustable guard, wrench
|
|

 |
| Compare to Other Brands |
|
DeWalt Heavy-Duty 4-1/2- 5 In. High Performance No-Lock On Paddle Switch Grinder
|
$138.75 |
| D28114N |
|
- 13.0 Amp/2.3HP, 11,000 rpm DEWALT built G55 (AC) motor designed for faster material removal and higher overload protection
- No-Lock On paddle switch prevents the user from locking the grinder on
- Dust Ejection System provides increased durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents
- Quick-change wheel release provides tool free wheel removal
- Dual abrasion protection provides increased motor protection from damaging dust and debris ingestion
- One piece brush arm prevents brush hang-up due to dust ingestion
- Complete Electronic Control provides multiple advanced technology features such as E-Clutch , Power-Off and Power Loss Reset
- E-Clutch shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor
- Power-Off overload protection shuts the tool off before it reaches overload or burn-up
- Power-Loss Reset prevents accidental re-starts following a power disruption when the tool is left in the "on" position
- Vibration reducing two position side handle provides user comfort and reduces user felt vibration
- Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces
- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
- Keyless adjustable guard provides tool free guard adjustments increasing productivity
- Amps 13.0
- Max Watts Out 1,700 W
- No Load Speed 11,000 rpm
- Use Wheels RPM Above 12,000 rpm
- Spindle Lock Yes
- Spindle Thread 5/8"-11
- Tool Length 13"
- Tool Weight 4.6 lbs
2-position side handle, depressed center wheel, keyless adjustable guard, wrench
|
|

 |
| Compare to Other Brands |
|
DeWalt Heavy-Duty 4-1/2- 5 In. High Performance Grinder
|
$138.75 |
| D28131 |
|
- 13.0 Amp/2.3HP, 11,000 rpm DEWALT built G55 (AC) motor designed for faster material removal and higher overload protection
- Dust Ejection System provides increased durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents
- Quick-change wheel release provides tool free wheel removal
- Dual abrasion protection provides increased motor protection from damaging dust and debris ingestion
- One piece brush arm prevents brush hang-up due to dust ingestion
- Complete Electronic Control provides multiple advanced technology features such as E-Clutch , Power-Off and Power Loss Reset
- E-Clutch shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor
- Power-Off overload protection shuts the tool off before it reaches overload or burn-up
- Power-Loss Reset prevents accidental re-starts following a power disruption when the tool is left in the "on" position
- Vibration reducing two position side handle provides user comfort and reduces user felt vibration
- Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces
- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
- Keyless adjustable guard provides tool free guard adjustments increasing productivity
- Lock-on slide switch provides increased user comfort in extended use applications
- Amps 13.0
- Max Watts Out 1,700 W
- No Load Speed 11,000 rpm
- Use Wheels RPM Above 12,000 rpm
- Spindle Lock Yes
- Spindle Thread 5/8"-11
- Tool Length 13"
- Tool Weight 4.6 lbs
2-position side handle, depressed center wheel, keyless adjustable guard, wrench
|
|

 |
| Compare to Other Brands |
|
DeWalt 5 In. / 6 In. Rat Tail SAG
|
$193.00 |
| D28065 |
|
- 13.0 Amp/2.3HP, 9,000 rpm DEWALT built G55 (AC/DC) motor designed for faster material removal and higher overload protection
- Dust Ejection System™ provides increased durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents
- Quick-Change wheel release provides tool free wheel removal
- Dual abrasion protection provides increased motor protection from damaging dust and debris ingestion
- One piece brush arm prevents brush hang-up due to dust ingestion
- Vibration reducing two position side handle provides user comfort and reduces user felt vibration
- Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces
- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
- Keyless adjustable guard provides tool free guard adjustments increasing productivity
- Amps: 13.0 Amps
- Max Watts Out: 1,700 W
- No Load Speed: 9,000 rpm
- Use Wheels RPM Above: 9,900 rpm
- Spindle Lock: Yes
- Spindle Thread: 5/8"-11
- Tool Length: 15.25 "
- Tool Weight: 4.75 lbs
2-position side handle, 5" keyless adjustable guard, 6" keyless adjustable guard, wrench
|
|

 |
| Compare to Other Brands |
|
DeWalt 5 In. / 6 In. Rat Tail SAG (no lock on)
|
$193.00 |
| D28065N |
|
- 13.0 Amp/2.3HP, 9,000 rpm DEWALT built G55 (AC/DC) motor designed for faster material removal and higher overload protection
- Dust Ejection System provides increased durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents
- Quick-Change wheel release provides tool free wheel removal
- Dual abrasion protection provides increased motor protection from damaging dust and debris ingestion
- One piece brush arm prevents brush hang-up due to dust ingestion
- Vibration reducing two position side handle provides user comfort and reduces user felt vibration
- Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces
- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
- Keyless adjustable guard provides tool free guard adjustments increasing productivity
- Amps: 13.0 Amps
- Max Watts Out: 1,700 W
- No Load Speed: 9,000 rpm
- Use Wheels RPM Above: 9,900 rpm
- Spindle Lock: Yes
- Spindle Thread: 5/8"-11
- Tool Length: 15.25"
- Tool Weight: 4.75 lbs
2 position side handle, 5" keyless adjustable guard, 6" keyless adjustable guard,
wrench
|
|

 |
| Compare to Other Brands |
|
DeWalt Heavy-Duty 5 In. (125mm) Small Angle Grinder
|
$98.75 |
| DW821 |
|
- 9 Amp motor, 11,000 RPM operating speed for high power in 5" grinding applications
- AC/DC capacity works off welding machines and generators for increased productivity and versatility
- Metal gear case dissipates heat for longer bearing, gear, and motor life
- Sealed switch and ball and roller bearings for long life in high dust ingestion applications
- Sliding switch for comfort in extended use applications
- Keyless adjustable guard allows for easy positioning of safety guard
- Rubber grip side handle provides increased comfort and reduced user felt vibration
- Amps9 AC/DC Amps
- Max Watts Out 9950 W
- No Load Speed11,000 rpm
- Use Wheels RPM Above 11,000 rpm
- Spindle Lock Yes
- Spindle Thread 5/8"-11
- Tool Length 11.4"
- Tool Weight 4.5 lbs
2 position side handle, depressed center wheel, wrench, backing flange, clamp nut, guard
|
|

 |
| Compare to Other Brands |
|
DeWalt Heavy-Duty 5 In. (125mm) Medium Angle Grinder
|
$134.50 |
| DW831 |
|
- 12.0 Amp motor, 10,000 RPM provides high speed for fast material removal
- AC/DC capacity works off welding machines and generators for increased productivity and versatility
- Higher power to weight ratio for greater efficiency and reduced user fatigue
- Rear handle design for greater comfort and control
- External brush doors for easy servicing
- Sealed ball and roller bearings for extended motor life
- Amps 12.0 AC/DC Amps
- Max Watts Out 1,837 W
- No Load Speed 10,000 rpm
- Use Wheels RPM Above 11,000 rpm
- Spindle Lock Yes
- Spindle Thread 5/8"-11
- Tool Length 14.33"
- Tool Weight 7.4 lbs
depressed center wheel, wrench, backing flange, clamp nut, tool-free guard, 2 position side handle
|
|

 |
| Compare to Other Brands |
|
DeWalt Heavy-Duty 6 In. (150mm) Cut-Off Tool / Small Angle Grinder
|
$145.50 |
| DW827 |
|
- 12 Amp motor, 9,000 RPM provides high power and speed for 6" grinding applications
- AC/DC capacity works off welding machines and generators for increased productivity and versatility
- Metal gear case dissipates heat for longer bearing, gear and motor life
- Sealed switch and ball and roller bearings for long life in high dust ingestion applications
- Sliding switch is convenient for extended use applications
- Keyless adjustable guard allows for easy positioning of safety guard without tools
- Rubber grip side handle provides increased comfort and reduced user felt vibration
- Amps 12.0 AC/DC Amps
- Max Watts Out 1,300 W
- No Load Speed 9,000 rpm
- Use Wheels RPM Above 9,900 rpm
- Spindle Lock Yes
- Spindle Thread 5/8"-11
- Tool Length 11.75"
- Tool Weight 6.1 lbs
2 position side handle, depressed center wheel, wrench, backing flange, clamp nut, Type 27 keyless guard, Type 1 keyless guard
|
|

 |
| Compare to Other Brands |
|
DeWalt Heavy-Duty 6 In. High Performance Cut-Off/ Grinder
|
$166.75 |
| D28140 |
|
- 13.0 Amp/2.3HP, 11,000 rpm DEWALT built G55 (AC) motor designed for faster material removal and higher overload protection
- Dual Clutch Protection prevents the gears from stripping and motor from burning up in a wheel pinch/stall increasing durability
- Dust Ejection System provides increased durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents
- Quick change wheel release provides tool free wheel removal
- Dual Abrasion Protection provides increased motor protection from damaging dust and debris ingestion
- One piece brush arm prevents brush hang up due to dust ingestion
- Complete Electronic Control provides multiple advanced technology features such as E-Clutch , Power-Off and Power-Loss Reset
- E-Clutch shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor
- Power-Off Overload Protection shuts the tool off before it reaches overload or burn-up
- Power-Loss Reset prevents accidental re-starts following a power disruption when the tool is left in the "on" position
- Vibration reducing 2-position side handle provides user comfort and reduces user felt vibration
- Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces
- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
- Keyless adjustable guard provides tool free guard adjustments increasing productivity
- Lock-on slide switch provides increased user comfort in extended use applications
- Amps 13.0
- Max Watts Out 1,700 W
- No Load Speed 9,000 rpm
- Use Wheels RPM Above 9,900 rpm
- Spindle Lock Yes
- Spindle Thread 5/8"-11
- Tool Length 13"
- Tool Weight 4.6 lbs
2-position side handle, Type 27 depressed center wheel, Type 27 keyless adjustable guard, Type 1 cutting wheel, Type 1 keyless adjustable guard, wrench
|
|

 |
| Compare to Other Brands |
|
DeWalt Heavy-Duty 6 In. High Performance Cut-Off/ Grinder
|
$166.75 |
| D28144 |
|
- 13.0 Amp/2.3HP, 9,000 rpm DEWALT built G55 (AC) motor designed for faster material removal and higher overload protection
- Dual Clutch Protection prevents the gears from stripping and motor from burning up in a wheel pinch/stall increasing durability
- Dust Ejection System provides increased durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents
- Quick-change wheel release provides tool free wheel removal
- Dual Abrasion Protection provides increased motor protection from damaging dust and debris ingestion
- One piece brush arm prevents brush hang-up due to dust ingestion
- Complete Electronic Control provides multiple advanced technology features such as E-Clutch , Power-Off and Power-Loss Reset
- E-Clutch shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor
- Power-Off Overload Protection shuts the tool off before it reaches overload or burn-up
- Power-Loss Reset prevents accidental re-starts following a power disruption when the tool is left in the "on" position
- Vibration reducing 2-position side handle provides user comfort and reduces user felt vibration
- Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces
- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
- Keyless adjustable guard provides tool free guard adjustments increasing productivity
- Amps 13.0
- Max Watts Out 1,700 W
- No Load Speed 9,000 rpm
- Use Wheels RPM Above 9,900 rpm
- Spindle Lock Yes
- Spindle Thread 5/8"-11
- Tool Length 13"
- Tool Weight 4.6 lbs
2-position side handle, Type 27 depressed center wheel, Type 27 keyless adjustable guard, Type 1 cutting wheel, Type 1 keyless adjustable guard, wrench
|
|

 |
| Compare to Other Brands |
|
DeWalt Heavy-Duty 6 In. High Performance Cut-Off/Grinder with Paddle Switch
|
$166.75 |
| D28144N |
|
- 13.0 Amp / 2.3HP, 9,000 rpm DEWALT built G55 (AC) motor designed for faster material removal and higher overload protection
- No-Lock On paddle switch prevents the user from locking the grinder on
- Dual Clutch Protection prevents the gears from stripping and motor from burning up in a wheel pinch/stall increasing durability
- Dust Ejection System provides increased durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents
- Quick-change wheel release provides tool free wheel removal
- Dual Abrasion Protection provides increased motor protection from damaging dust and debris ingestion
- One piece brush arm prevents brush hang-up due to dust ingestion
- Complete Electronic Control provides multiple advanced technology features such as E-Clutch , Power-Off and Power-Loss Reset
- E-Clutch shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor
- Power-Off Overload Protection shuts the tool off before it reaches overload or burn-up
- Power-Loss Reset prevents accidental re-starts following a power disruption when the tool is left in the "on" position
- Vibration reducing 2-position side handle provides user comfort and reduces user felt vibration
- Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces
- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
- Keyless adjustable guard provides tool free guard adjustments increasing productivity
- Amps 13.0
- Max Watts Out 1,700 W
- No Load Speed 9,000 rpm
- Use Wheels RPM Above 9,900 rpm
- Spindle Lock Yes
- Spindle Thread 5/8"-11
- Tool Length 13"
- Tool Weight 4.6 lbs
2-position side handle, Type 27 depressed center wheel, Type 27 keyless adjustable guard, Type 1 cutting wheel, Type 1 keyless adjustable guard, wrench
|
|

 |
| Compare to Other Brands |
|
DeWalt Heavy-Duty 7 In. (180mm) Medium Angle Grinder
|
$129.25 |
| DW840 |
|
- 13.0 Amp motor, 8,000 RPM provides high power and speed for 7" grinding applications
- AC/DC capacity works off welding machines and generators for increased productivity and versatility
- High power-to-weight ratio for greater efficiency and reduced user fatigue
- Rear handle design for greater comfort and control
- External brush doors for easy servicing
- Spindle lock for quick and easy wheel changes
- Amps 13.0 AC/DC Amps
- Max Watts Out 2,250 W
- No Load Speed 8,000 rpm
- Use Wheels RPM Above 8,500 rpm
- Spindle Lock Yes
- Spindle Thread 5/8"-11
- Tool Length 16.125"
- Tool Weight 8.0 lbs
depressed center wheel, wrench, backing flange, clamp nut, guard, 2 position side handle
|
|

 |
| Compare to Other Brands |
|