DeWalt Heavy-Duty 18 Gauge Swivel Head Shear |
$191.25 |
| DW890 |
|
DeWalt DW890 Features:
• Powerful, 5.0 Amp, all ball-bearing motor for long life
• Head swivels 360° for cutting convenience
• Cuts 7/32" strip which continuously curls out of cutting area for
clear line of sight
• Variable speed permits cutting of a wide variety of thickness
• Cuts radius of 5-1/2" and larger
| DeWalt DW890 SPECIFICATIONS |
Amps 5.0 Amps
Max Watts Out 470 W
Strokes/Min 0-2,500 spm
Capacity (Mild Steel) 18 ga.
Capacity (Stainless Steel) 20 ga.
Tool Length 9.125"
Tool Weight 5.0 lbs
|
|
 |
| Compare to Other Brands |
|
DeWalt 18V Cordless 18 Gauge Swivel Head and Shear (Tool Only) |
$204.25 |
| DC490B |
|
The DeWalt DC490B cordless shear is designed to slice through cold-rolled steel ranging from 28- to 18-gauge with uncompromising speed and accuracy. It was specifically engineered for metalworkers, HVAC contractors and others who earn a living working with sheet metal, and fabricating and installing air-conditioning and heating ducts. The tool is powered by an 18-volt battery, which drives hardened-steel blades at a metal-shearing 2,300 strokes per minute (SPM). As it slices through metal, it removes a 7/32-inch-wide ribbon of waste material that curls up and out of the way of the cut line. The DC490B is equipped with a 360-degree swiveling head that permits you to comfortably cut at any angle or awkward position, in extremely tight quarters, and radii as tight as 5-1/2 inches. And it's cordless, so there's no cord to drag around, a real benefit when working in ceilings, attics and cramped crawlspaces. The shear comes with a blade wrench for quick blade changes.
DeWalt DC490B Features:
- Head swivels 360° which allows user to access tight quarters while maintaining comfort
- Cuts 7/32" strip which continuously curls out of the cutting area providing consistent and accurate cuts
- Cordless tool allows user to take the tool to the work piece
| DeWalt DC490B SPECIFICATIONS |
Voltage: 18V
Strokes/Min: 0-2,300spm
Minimum Cutting Radius: 5.5"
Capacity in Steel: 18ga.
Tool Weight: 3.7 lbs
Shipping Weight: 4.25 lbs
- blade wrench
- tool only (batteries and charger sold separately)
|
|
|
| Compare to Other Brands |
|
DeWalt 18V Cordless 18 Gauge Swivel Head and OFF-SET Shear (Tool Only) |
$204.25 |
| DC495B |
|
The DeWalt DC495B cordless off-set shear is designed to cut 18-gauge cold-rolled steel with uncompromising speed and accuracy. It’s specifically engineered for metalworkers, HVAC contractors and others who earn a living working with sheet metal, and fabricating and installing air-conditioning and heating ducts. This commercial-grade shear will even slice through tough 20-gauge spiral duct seams, a job that stalls most other cordless shears. When the tool is powered by an 18-volt XRP NiCad battery that drives the hardened-steel blades at an impressive 2,300 strokes per minute (SPM). The DC495B is equipped with an offset, 360-degree swiveling head that delivers unprecedented control and cutting performance. By adjusting the offset head, you can comfortably cut at any angle, in extremely narrow spaces, and along hairpin turns and circles with radii as tight as 1 -inch Plus, it’s cordless, so there’s no cord to drag around, a real benefit when working in ceilings, attics and cramped crawlspaces. The shear comes with a blade wrench for quick blade changes.
DeWalt DC495B Features:
- Offset shear design can easily turn and cut circles
- Offset shear design can easily cut through 20ga spiral duct seams
- Head swivels 360° which allows user to access tight quarters while maintaining comfort
| DeWalt DC495B SPECIFICATIONS |
Voltage: 18V
Strokes/Min: 0-2,300spm
Minimum Cutting Radius: 1.0"
Capacity in Steel: 18ga.
Tool Weight: 3.7 lbs
Shipping Weight: 3.85 lbs
- wrench
- tool only (batteries and charger sold separately)
|
|
|
| Compare to Other Brands |
|
DeWalt 18V Offset Shear |
$372.50 |
| DC495KA |
|
DeWalt DC495KA Features:
• Offset shear design can easily turn and cut circles
• Offset shear design can easily cut through 20ga spiral duct seams
• Head swivels 360° which allows user to access tight quarters while maintaining
comfort
| DeWalt DC495KA SPECIFICATIONS |
Voltage: 18 V
Strokes/Min: 0-2,300 spm
Minimum Cutting Radius: 1.0 "
Capacity In Steel: 18 ga.
Tool Weight: 6.1 lbs
Shipping Weight: 15.5 LBS
1 hour charger, (2) 18V XRP batteries, Wrench, Contractor Bag |
|
|
| Compare to Other Brands |
|
DeWalt Heavy-Duty 14 Gauge Swivel Head Shear |
$300.00 |
| DW891 |
|
DeWalt DW891 Features:
• Head swivels 360° for cutting convenience
• Cuts 7/32" strip which continuously curls out of cutting area for
clear line of sight
• Variable speed permits cutting of a wide variety of thickness
• Cuts radius of 5-1/2" and larger
| DeWalt DW891 SPECIFICATIONS |
Amps 5.0 AC Amps
Max Watts Out 470 W
Strokes/Min 0-2,500 spm
Capacity (Mild Steel) 14 ga.
Capacity (Stainless Steel) 16 ga.
Tool Length 9.125"
Tool Weight 5.0 lbs
|
|
|
| Compare to Other Brands |
|
DeWalt Heavy-Duty 14 Gauge Shear |
$325.75 |
| DW892 |
|
DeWalt DW892Features:
• Dependable, 3.0 Amp, all ball-bearing motor for long life
• Rugged aluminum alloy gear case for maximum durability
• Paddle switch for convenient one-handed operation
• Blades are easy to adjust and replace
• Cuts radius as small as 1"
| DeWalt DW892 SPECIFICATIONS |
Amps 3.0 AC/DC Amps
Max Watts Out 384 W
Strokes/Min 2,700 spm
Capacity (Mild Steel) 14 ga.
Capacity (Stainless Steel) 16 ga.
Tool Length 9.5"
Tool Weight 5.5 lbs
blade kit (upper and lower blades, screws, nuts and wrenches)
|
|
|
| Compare to Other Brands |
|
DeWalt Heavy-Duty 12 Gauge Shear |
$548.75 |
| DW893 |
|
DeWalt DW893 Features:
• Powerful, 6.5 Amp, all ball-bearing motor for long life
• Rugged aluminum alloy gear case for maximum durability
• Paddle switch for convenient one-handed operation
• Four-edge blade design provides four times the life of standard
blades
• Cuts radius as small as 1" for various applications
| DeWalt DW893 SPECIFICATIONS |
Amps 6.5 AC/DC Amps
Max Watts Out 225 W
Strokes/Min 1,950 spm
Capacity (Mild Steel) 12 ga.
Capacity (Stainless Steel) 14 ga.
Tool Length 10.5"
Tool Weight 4.5 lbs
|
|
|
| Compare to Other Brands |
|
DeWalt Heavy-Duty 1/2 Inch Variable Speed Cement Shear |
$230.75 |
| D28605 |
|
DeWalt D28605 Features:
•Powerful, 6.5 Amp, all ball-bearing motor for increased power and long
life
• Head swivels 360° for added cutting convenience
• Variable for increased user control
• Reversible dual cutting edge side blades for longer cutting life and
increased productivity
• Replaceable center and side blades for longer cutting life and increased
productivity
| DeWalt D28605 SPECIFICATIONS |
Amps 6.5
Max Watts Out 800 W
Strokes/Min 0-2,500 spm
Capacity (Mild Steel) N/A ga.
Capacity (Stainless Steel) N/A ga.
Tool Length 9.1"
Tool Weight 4.5 lbs
|
|
|
| Compare to Other Brands |
|
DeWalt Shear Accessories |
Replacement Right Blade for DW890/DW891 |
$27.50 |
| DW8900 |
|
DeWalt DW8900 Features:
• Replacement Right Blade for DW890/DW891 Heavy-Duty 18/14 Gauge Swivel Head and Shear |
|
 |
Replacement Left Blade for DW890/DW891 |
$27.50 |
| DW8999 |
|
DeWalt DW8999 Features:
• Replacement Left Blade for DW890/DW891 Heavy-Duty 18/14 Gauge Swivel Head and Shear |
|
Replacement Center Blade for DW890 |
$27.50 |
| DW8901 |
|
DeWalt DW8901 Features:
• Replacement Center Blade for DW890 Heavy-Duty 18 Gauge Swivel Head Shear |
|
 |
Replacement Center Blade for DW891 |
$35.75 |
| DW8902 |
|
DeWalt DW8902 Features:
• Replacement Center Blade for DW891 Heavy-Duty 14 Gauge Swivel Head Shear |
|
Blade Kit for DW892 |
$30.75 |
| DW8920 |
|
DeWalt DW8920 Features:
• Replacement Blade Kit for the DW892 Heavy-Duty 14 Gauge Shear
• DeWalt INCLUDES: upper and lower blades, screws, nuts, wrenches |
|
 |
Blade for DW893 |
$42.50 |
| DW8930 |
|
DeWalt DW8930 Features:
• Replacement Blade for the DW893 Heavy-Duty 12 Gauge Shear
• Four edge blade same for top and bottom |
|
 |
DeWalt Tools
