DeWalt Heavy-Duty 1-9/16 In. SDS Max Rotary Hammer Kit |
$473.50 |
| D25500K |
|
- 11.0 amp DeWalt motordelivers high output and overload protection
- Electronic Variable Speedallows the user to control the speed of drilling and chipping
- 7.3 ft/lbs of impact energydelivers up to 42% faster drilling and chipping applications than the competition
- SDS max toolholderis compatible with most bits the user has
- Rubber griphelps reduce the level of vibration felt by the user when operating the tool
- Rear hanlde mountmeans less bending over when using tool in down drilling applications
- Factory clutchhelps reduce the tool's reaction to embedded steel when bits "lock-up" while in operation, preventing injury
- Modular constructionallows service technicians to repair tools quickly for less down time when you service tools
- 360° side handleallows user the ability to position the side handle wherever it best suits the application
| DeWalt D25500K SPECIFICATIONS |
- Amps: 11.0 Amps
- Concrete Drilling: Yes
- Chipping: Yes
- Wood/Steel Drilling: N/A
- No Load Speed; 140-280 rpm
- Loaded Speed (bpm): 1330-2660 bpm
- Impact Energy: 7.3 ft/lbs
- Clutch: Yes
- Tool Length: 18.5"
- Tool Weight: 13 lbs
- 360° side handle, depth rod, heavy-duty kit box
|
|
 |
| Compare to Other Brands |
|
DeWalt 1-9/16 Inch Spline Combination Hammer Kit |
$473.50 |
| D25553K |
|
- 12.0 Amp motor high performance and overload protection, 490 rpm, 3300 bpm
- 8.0 ft-lbs of impact energy provides fast drilling and powerful chipping
- Rear handle mount for increased user comfort in down drilling applications
- Rubber grip helps reduce the level of vibration felt by the user
- Factory-set clutch reduces sudden, high torque reactions if bit jams
| DeWalt D25553K SPECIFICATIONS |
- Concrete Drilling 3/8" - 1-1/4"
- Impact Energy 8.0ft-lbs
- Amps 11.0Amps
- Chipping Yes
- Wood/Steel Drilling N/A"
- No Load Speed 490rpm
- Loaded Speed (BPM) 3300bpm
- Clutch Yes
- Tool Length 18.6""
- Tool Weight 14lbs
|
|
 |
 |
- 360° side handle, kit box, Users Guide
|
|
|
| Compare to Other Brands |
|
DeWalt 1-7/8 In. SDS Max Combination Hammer with CTC® |
$1192.50 |
| D25712K |
|
The DEWALT D25712K 1-7/8 Inch SDS Max Combination Hammer with CTC® has a powerful 13 Amp motor that provides maximum performance and overload protection. The 11.7-Foot-pounds. Impact Energy provides fast drilling and powerful chipping. Incorporated Complete Torque Control (CTC®) - Patented 2 Stage clutch That provides maximum control in bind up situations. Also includes the SHOCKS, Active Vibration Control that reduces vibration up to 50-percent while increasing user comfort and productivity. The rear handle mount means less bending over when using tool in down drilling applications. The Trigger Lock On function provides increased user comfort in extended use chipping applications. Modular design allows easy access to switch, motor, cordset, brushes and gear case for ease of service.
- SHOCKS - Active Vibration Control® reduces vibration up to 50% while increasing user comfort and productivity
- Complete Torque Control (CTC)® - Patented 2 Stage clutch provides maximum control in bind up situations
- 13 Amp motor provides maximum performance & overload protection; 210-415 rpm; 1430-2840 bpm
- 11.7 ft lbs. of Impact Energy provides fast drilling and powerful chipping
- Rear handle mount means less bending over when using tool in downward chipping applications
- Trigger Lock On provides increased user comfort in extended use chipping applications
- Allows easy access to switch, motor, cordset, brushes and gear case for ease of service
| DeWalt D25712K SPECIFICATIONS |
- Optimal Concrete Drilling: 1 - 1 5/8 In.
- Amps: 13.0 Amps
- Impact Energy: 11.7ft-lbs
Vibration Control: Yes - SHOCKS
- Vibration Measurement: 7.8 m/s2
- No Load Speed: 137-275rpm
- Blows/Min: 1260-2520bpm
- Clutch: Yes-2 Stage CTC
- Tool Length: 20.5 In.
- Tool Weight: 17.5 lbs
- Manufacturer's Warranty:
Service Contract 2 years
|
 |
 |
- SDS Max Combination Hammer
- 360° side handle
- kit box
|
|
|
| Compare to Other Brands |
|
DeWalt 2 In. SDS Max Combination Hammer with CTC® |
$1348.50 |
| D25762K |
|
| The DeWalt D25762K 2 Inch SDS Max Combination Hammer with CTC® has a powerful 15 Amp motor that provides maximum performance and overload protection. The 15-Foot-pounds. Impact Energy provides fast drilling and powerful chipping. Incorporated Complete Torque Control (CTC®) - Patented 2 Stage clutch That provides maximum control in bind up situations. Also includes the SHOCKS, Active Vibration Control that reduces vibration up to 50-percent while increasing user comfort and productivity. The rear handle mount means less bending over when using tool in down drilling applications. The Trigger Lock On function provides increased user comfort in extended use chipping applications. Modular design allows easy access to switch, motor, cordset, brushes and gear case for ease of service. Includes Hammer, 360 Degree side handle, and kit box. |
- SHOCKS - Active Vibration Control® reduces vibration by up to 50%
- Complete Torque Control (CTC)® utilizes patented 2-stage clutch for maximum control in bind-up situations
- 15 Amp motor provides maximum overload protection & power
- 15 ft-lbs of impact energy provides maximum performance in drilling & chipping
- Rear handle mount means less bending over when using tool in down drilling applications
- Lock-on slide switch provides increased user comfort in extended use applications
- Modular design allows easy access to switch, motor, cordset, brushes and gear case for ease of service
| DeWalt D25762K SPECIFICATIONS |
- Optimal Concrete Drilling: 1" - 1-3/4"
- Amps: 15.0 Amps
- Impact Energy: 15.0ft-lbs
- Vibration Control: Yes - SHOCKS™
- Vibration Measurement: 9.3 m/s2
- No Load Speed: 125-250rpm
- Blows/Min: 1,150-2,304bpm
- Clutch: 2-Stage CTC®
- Tool Length: 23 In.
- Tool Weight: 19.2 lbs
- Manufacturer's Warranty: Service Contract 2 years
- SDS Max Combination Hammer
- 360° side handle
- Kit Box
|
|
|
ACCESSORIES for DeWalt Rotary Chipping and Drilling Hammers |
Adaptor, SDS MAX to SDS Plus |
$70.25 |
| DW5891 |
|
- Adapts SDS MAX rotary hammers with "rotation only" mode to accept SDS Plus bits. Will also permit use of the adaptor below so they can accept 1/2" chuck for regular drill bits
|
|
(Similar to this, but actual photo not available) |
Adaptor, SDS Plus to 1/2 in. Chuck |
$16.50 |
| DW5351 |
|
- Adapts SDS rotary hammers with "rotation only" mode so they can accept 1/2" chuck for regular drill bits
|
|
 |
1/2 in. Chuck and Key, for DW5351 and DW5790 |
$30.75 |
| DW5353 |
|
- 1/2" keyed chuck, threads onto DW5351 (SDS Plus adaptor) or DW5790 (Spline Shank adaptor) to mount regular drill bits onto rotary hammers that have "rotation only" mode
|
|
 |
DeWalt Tools
