DeWalt L-Shape SDS Chipping Hammer |
$340.75 |
| D25330K |
|
- L-Shape design offers superior balance and control
- 2.5 ft-lbs of impact energy provides powerful chipping
- 6.3 Amp motor provides high performance and overload protection
- At only 11-1/2" this hammer is the most compact in the market
- Light weight design (6.5 lbs) provides comfort for extended use
| DeWalt D25330K SPECIFICATIONS |
- Concrete Drilling: 1"
- Impact Energy: 2.5 ft/lbs
- Amps: 6.3 Amps
- Chipping: Yes
- Wood/Steel Drilling: w/adaptor
- Blows/Min: 0-4,100 bpm
- Switch: VSR
- Clutch: Factory Set
- Tool Length: 11.5"
- Tool Weight: 6.5 lbs
|
|
 |
| Compare to Other Brands |
|
DeWalt Heavy-Duty 12 lb. SDS Max Demolition Hammer |
$586.75 |
| D25830K |
|
- 11.5 Amp motordelivers high output and overload protection
- 8 ft/lbs of impact energydelivers faster chipping applications than the competition
- Rubber griphelps reduce the level of vibration felt by the user when operating the tool
- Rear handle mountmeans less bending over when using tool in down drilling applications
- Modular constructionallows service techinicians to repair tools quickly for less down time when you service tool
- Side handleallows for ease of use in chipping applications
| DeWalt D25830K SPECIFICATIONS |
- Impact Energy 8 ft/lbs
- Amps11.5 Amps
- Loaded Speed (bpm) 1330-2660 bpm
- Variable Impact Control Dial Yes - 7 Settings Settings
- Chisel Rotation Yes - Manual
- Tool Length 18.5"
- Tool Weight 12.3 lbs
- Side handle
- Heavy-duty kit box
- Bit grease
|
|
|
| Compare to Other Brands |
|
DeWalt 12 lb. SDS Max Demolition Hammer Kit with Shocks |
$618.00 |
| D25831K |
|
- 13.5 Amp motor maximum performance and overload protection
- 9.5 ft-lbs of impact provides powerful chipping and faster destruction rates
- SHOCKS - Active Vibration Control® reduces vibration up to 50% while increasing user comfort and productivity
- Electronic variable speed allows the user to control the speed of chipping and impact energy
| DeWalt D25831K SPECIFICATIONS |
- Impact Energy: 9.5ft-lbs
- Vibration Control: Yes - SHOCKS
- Vibration Measurement: 8.3 m/s2
- Amps: 13.5 Amps
- Max Watts Out N/AW
- Loaded Speed (BPM): 1430 - 2840bpm
- Variable Impact Control Dial: 7Settings
- Chisel Rotation: Yes - Manual
- Tool Length 18.6 In.
- Tool Weight 13.6 lbs.
|
|
 |
- SDS Max Demolition Hammer
- Side handle
- Bit Grease
- Kit Box
|
|
|
| Compare to Other Brands |
|
DeWalt Spline Demolition Hammer Kit with Shocks |
$618.00 |
| D25851K |
|
- 13.5 Amp motor maximum performance and overload protection
- 9.5 ft-lbs of impact provides powerful chipping and faster destruction rates
- SHOCKS - Active Vibration Control® reduces vibration up to 50% while increasing user comfort and productivity
- Electronic variable speed allows the user to control the speed of chipping and impact energy
| DeWalt D25851K SPECIFICATIONS |
- Impact Energy: 9.5ft-lbs
- Vibration Control: Yes - SHOCKS
- Vibration Measurement: 8.3 m/s2
- Amps: 13.5 Amps
- Max Watts Out: N/aW
- Loaded Speed (BPM): 1430 - 2840bpm
- Variable Impact Control Dial: 7Settings
- Chisel Rotation: Yes - Manual
- Tool Length: 18.6 in.
- Tool Weight: 14 lbs
- Spline Demolition H
ammer
- Side Handle
- Bit Grease
- Kit Box
|
|
|
| Compare to Other Brands |
|
DeWalt Heavy-Duty 19 lb. SDS Max Demolition Hammer |
$768.00 |
| D25890K |
|
- 15 ft-lbs of impact energyprovides maximum performance in chipping applications
- SHOCKS™- Active Vibration Control reduces vibration by up to 70%
- Lock-on switchreduces user fatigue while chipping
- Modular designprovides easy access to switch, brushes, & cord-set
- 15 Amp motorprovides maximum overload protection & power
| DeWalt D25890K SPECIFICATIONS |
- Impact Energy 15 ft/lbs
- Amps 15 Amps
- Max Watts Out W
- Loaded Speed (bpm) 1,152-2,304
- Variable Impact Control Dial 8 Settings
- Chisel Rotation Yes
- Tool Length 23"
- Tool Weight 19 lbs
|
|
|
| Compare to Other Brands |
|
DeWalt 19 lb. SDS Max Demolition Hammer |
$768.00 |
| D25891K |
|
The DEWALT D25891K SDS MAX Demo Hammer has a 15 Amp motor for maximum performance and overload protection. The 15-foot-pounds of impact energy provides powerful chipping and faster destruction rates. It incorporates the SHOCKS - Active Vibration Control that reduces vibration up to 50-percent while increasing user comfort and productivity. The electronic variable speed allows the user to control the speed of chipping and impact energy. Its modular design allows easy access to switch, motor, cordset, brushes and gear case for ease of service.
- SHOCKS - Active Vibration Control® reduces vibration by up to 50%
- 15 ft-lbs of impact energy provides maximum performance in chipping applications
- 15 Amp motor provides maximum overload protection & power
- Lock-on slide switch provides increased user comfort in extended use applications
- Modular design allows easy access to switch, motor, cordset, brushes and gear case for ease of service
| DeWalt D25891K SPECIFICATIONS |
- Impact Energy: 15ft-lbs
- Vibration Control: Yes
- Vibration Measurement: 12.4 m/s2
- Amps: 15 Amps
- Max Watts Out: N/AW
- Loaded Speed (BPM): 1,152-2,304bpm
- Variable Impact Control Dial: 8Settings
- Chisel Rotation: Yes
- Tool Length: 23 in.
- Tool Weight: 19 lbs
|
|
 |
- SDS Max Demolition Hammer
- Side handle
- Bit Grease
- Kit Box
|
|
|
| Compare to Other Brands |
|
DeWalt SDS Max Demolition Hammer Kit |
$713.25 |
| D25899K |
|
- Large oversize hammer mechanism delivers extreme durability and excellent concrete breaking performance
- Ergonomic inline design ensures user comfort during any application
- Compact, streamlined design allows access in confined areas
- In line design for better handling and quick change chisel ajustment allows fast orientation of the chisel through 12 preset positions
- Modular design allows for quick access to key compnents allowing for faster and cheaper servicing.
- 1500 Watt, 95 mm motor delivers outstanding motor efficiency and durability
- Magnesium housings ensure maximum durability and minimum weight
- Multi adjustable side handle can be located anywhere on the hammer barrel, maintaining user comfort in any application
| DeWalt D25899K SPECIFICATIONS |
- Power Input: 1500 Watts
Power Output: 750 Watts
- Hand/Arm Vibration: 12 m/s2
- Blows per Minute: 2040 bpm
- Impact Energy: 25 J
- Tool Holder: SDS Max Morse Taper
- Tool Weight: 20.9 lbs.
- Lenght: 650mm
- Height: 250mm
- Multi position side handle
- Heavy duty carrying case
|
|
|
| Compare to Other Brands |
|
DeWalt SDS Max Demolition Hammer Kit |
$881.25 |
| D25901K |
|
- Active Vibration Control system incorporating counterbalance mass and floating handle delivers extreme low vibration to less than 8 m/s2
- Large oversize hammer mechanism delivers extreme durability and excellent concrete breaking performance
- Ergonomic inline design ensures user comfort during any application
- Compact, streamlined design allows access in confined areas
- Quick change chisel ajustment allows fast orientation of the chisel through 12 preset positions
- Modular design allows for quick access to key compnents allowing for faster and cheaper servicing.
- 1500 Watt, 95 mm motor delivers outstanding motor efficiency and durability
- Magnesium housings ensure maximum durability and minimum weight
- Soft start feature ensures accurate clean breaking without chisel walking
- Multi adjustable side handle can be located anywhere on the hammer barrel, maintaining user comfort in any application
| DeWalt D25901K SPECIFICATIONS |
- Power Input: 1500 Watts
Power Output: 750 Watts
- Hand/Arm Vibration: 7.9 m/s2
- Blows per Minute: 1020-2040 bpm
- Impact Energy: 5-25 J
- Tool Holder: SDS Max
- Tool Weight: 23.1 lbs.
- Lenght: 690mm
- Height: 250mm
- Multi position side handle
- Chisel
- Grease
- Cloth
- Heavy duty carrying case
|
|
|
| Compare to Other Brands |
|
DeWalt Heavy Duty 3/4 Inch Hex Demolition Hammer Kit |
$985.00 |
| D25941K |
|
- 15.0 Amp motor provides high performance and overload protection
- Active Vibration Control (AVC)™ reduces vibration resulting in less user fatigue and more productivity
- Non-air pumping beatpiece eliminates masonry dust from entering the unit extending tool and seal life
- Spring-loaded dust seals ensure longer seal life
- Large on/off rocker switch allows for easy single finger operation
- One-step chisel rotation (12 positions) allows the user to quickly and accurately adjust the chisel, not the tool
- Large rear rubber handle allows easy operation with 1 or 2 hands
- Variable position side handle allows 360° rotation and 150° adjustment for ease of use
- In-line design for easy operation of tool in horizontal or vertical applications
- 3/4" Hex toolholder with rubber dampers absorb energy providing longer life
| DeWalt D25941K SPECIFICATIONS |
- Power Input: 1600 Watts
- Power Output: 790 Watts
- Hand/Arm Vibration: 8.8 m/s2
- Blows per Minute: 1620 bpm
- Impact Energy: 30.6 J
- Tool Holder: 3/4" (19mm) Hex
- Tool Weight: 29 lbs.
- Lenght: 750mm
- Height: 250mm
- Multi position side handle
- Pointed chisel
- Grease
- Cloth
- Heavy duty carrying case
|
|
|
| Compare to Other Brands |
|
DeWalt Heavy Duty Breaker Hammer |
$1561.50 |
| D25980 |
|
- 61 Ft-lbs impact energy provides maximum performance
- SHOCKS - Active Vibration Control reduces user fatigue and increases comfort
- 15 amp motor provides maximum power and overload protection
- Rubber coated handles provide greater comfort and control
- Electronic soft start increases productivity by reducing bit walking
| DeWalt D25980 SPECIFICATIONS |
- Amps: 15.0 Amps
- Impact Energy: 61 ft/lbs
- Max Watts Out: W
- Loaded Speed (bpm): 900 bpm
- Variable Impact Control Dial: Settings
- Tool Weight: 68.3 lbs
- Heavy Duty breaker hammer
|
|
|
| Compare to Other Brands |
|
Heavy Duty Pavement Breaker with Hammer Truck and Steel |
$1683.75 |
| D25980K |
|
- 61 Ft-lbs impact energy provides maximum performance
- SHOCKS - Active Vibration Control reduces user fatigue and increases comfort and productivity
- 15 amp motor provides maximum power and overload protection
- Rubber coated handles provide greater comfort and control
- Electronic soft start increases productivity by reducing bit walking
- Hammer truck provides easy transportation of pavement breaker
| DeWalt D25980K SPECIFICATIONS |
(same as #D25980 above)
|
|
 |
Heavy Duty Hammer Truck |
$194.25 |
| D259803 |
|
- Transports breaker with steel in or out of tool eliminating need to remove bit during transport
- Integral hold-down strap keeps strap permanently mounted to hammer truck
- Integral cord-wrap allows for easy cord storage
- Secure bit storage firmly holds up to (4) 1-1/8" breaker steel bits
|
|
 |
DeWalt Tools 
