Carbide Tipped Router Bits & Cutters
|
Templet and Plunge Cutting Router Bits
- 1/4", 3/8" & 1/2" Shanks
- Cutting Diameters from 1/8" to 1-1/2"
- Carbide Lengths from 7/16" to 2-1/2"
|
|
Solid Carbide Spiral Plunge Bits
- 1/4" & 1/2" Shanks
- Cutting Diameters from 1/8" to 1/2"
- Carbide Lengths from 1/2" to 1-1/2"
|
|
Solid Carbide Compression Spiral Bits
- 1/4", 3/8", 1/2" & 3/4" Shanks
- Cutting Diameters from 1/4" to 3/4"
- Carbide Lengths from 1" to 2"
|
|
Staggered Tooth Router Bits
- 1/4", 3/8" & 1/2" Shanks
- Cutting Diameters from 1/4" to 1/2"
- Carbide Lengths from 1" to 2-1/4"
|
|
Mortising Bits
- 1/4" & 1/2" Shanks
- Cutting Diameters from 1/2" to 1-1/4"
- Carbide Lengths from 5/8" to 3/4"
|
|
Panel Pilot Bits
- 1/4", 3/8" & 1/2" Shanks
- Cutting Diameters from 1/4" to 1/2"
- Carbide Lengths from 3/4" to 1-1/4"
|
|
Dovetail Bits
- 1/4" & 1/2" Shanks
- Large Diameters from 3/8" to 1"
- Degrees of Angle from 7° to 14°"
|
|
Core Box Bits
- 1/4" & 1/2" Shanks
- Diameters from 1/8" to 1"
|
|
Solid Carbide Flush Trim Bit
- 1/4" Shank
- Cutting Diameter 1/4"
|
|
Solid Carbide Dado Flush Trim Bit
- 1/4" Shank
- Cutting Diameter 1/4"
|
|
Solid Carbide Bevel Trim Bit
- 1/4" Shank
- Bevel Angle 7-1/2°
|
|
Solid Carbide V-Groover & Scorer
- 1/4" Shank
- Cutting Diameter 1/4"
|
|
Solid Carbide Veining Bits
- 1/4" Shank
- Cutting Diameters 1/8" to 1/4"
|
|
Bull Nose Bits, Half Round
- 1/4" & 1/2" Shanks
- Radius 5/64" to 17/32"
- Material Thickness 1/8" to 1"
|
|
Beading Bit, Plunge
- 1/4" Shank
- Large Diameter 3/8"
|
|
O-Gee Bits, Plunge
- 1/4" Shank
- Large Diameters 3/8" to 3/4"
|
|
Classical Bits, Plunge
- 1/4" & 1/2" Shanks
- Large Diameters 1/2" to 1"
|
|
Rounding Over Bits, Plunge
- 1/4" & 1/2" Shanks
- Radius 1/8" to 3/4"
- Large Diameters 3/8" to 2"
|
|
Slotting Cutters
- 1/4" & 1/2" Shank Arbors
- Standard Kerfs 1/16" to 1/4"
- Diameter 2"
|
|
Flush Cutters with Ball Bearing
- 1/4" & 1/2" Shanks
- Cutting Diameters 1/4" to 1/2"
- Carbide Lengths 1/2" to 2"
|
|
Helix Laminate Trim Bit with Ball Bearing
- 1/4" Shank
- Cutting Diameter 3/4"
- Carbide Length 5/8"
|
|
Flush Trim V-Groove Bits with Ball Bearing
- 1/4" & 1/2" Shanks
- Cutting Diameter 5/8"
- Carbide Length 1"
|
|
Templet Flush Cutters with Upper Ball Bearing
- 1/4" & 1/2" Shanks
- Cutting Diameters 1/2" to 1-1/8"
- Carbide Lengths 3/4" to 1-1/2"
|
|
Overhang Trim Bits with Ball Bearing
- 1/4" Shank
- Cutting Diameter 3/8"
- Overhangs 1/8" & 3/16"
|
|
Two Wing Bevel Bits with 1/2" Ball Bearing
- 1/4" Shank
- Bevel Cuts 15° & 25°
|
|
Chamfering Bits with Ball Bearing
- 1/4" & 1/2" Shanks
- Cut Angle 45°
|
|
Rabbeting Bits with 1/2" Ball Bearing
- 1/4" & 1/2" Shanks
- Depth of Rabbet 3/8"
|
|
Cove Bits with Ball Bearing
- 1/4" & 1/2" Shanks
- Radius 1/8" to 1/2"
|
|
Corner Rounding Bits with Ball Bearing
- 1/4" & 1/2" Shanks
- Radius 1/16" to 1-1/2"
|
|
Bull Nose Radius Bits with Ball Bearing
- 1/4" & 1/2" Shanks
- Material Thickness 1/8" to 1"
|
|
Beading Bits with Ball Bearing
- 1/4" & 1/2" Shanks
- Radius 1/16" to 1/2"
|
|
Roman O-Gee Bits with Ball Bearing
- 1/4" & 1/2" Shanks
- Radius 5/32" to 1/4"
|
|
O-Gee Bits with Ball Bearing
- 1/4" Shank
- Large Diameters 1-1/8" to 1-3/8"
|
|
O-Gee Fillet Bits with Ball Bearing
- 1/4" & 1/2" Shanks
- Large Diameter 1-3/8"
|
|
Classical O-Gee Bits with Ball Bearing
- 1/4" Shank
- Large Diameters 1-1/8" to 1-3/8"
|
|
Classical Bead & Cove Bits with Ball Bearing - Double Roman O-Gee
- 1/4" Shank
- Large Diameters 1" to 1-3/8"
|
|
O-Gee Fillet Raised Panel Bit with Ball Bearing
- 1/2" Shank
- Cutting Diameter 2-5/8"
|
|
Tongue & Groove Assembly with Ball Bearing
- 1/2" Shank
- Depth of Cut 1/2"
|
|
Reversible O-Gee Stile & Rail Assembly with Ball Bearing
- 1/2" Shank
- Cutting Diameter 1-3/4"
|
|
Reversible Classical Stile & Rail Assembly with Ball Bearing
- 1/2" Shank
- Cutting Diameter 1-3/4"
|
|
Ball Bearings
- Inside Diameters 1/8" to 1/2"
- Outside Diameters 3/8" to 1-1/8"
|
|
Arbors Including Nut & Spacer
- Shank Diameters 1/4" & 1/2"
|
|
Solid Surface Router Cutters
|
Face Inlay Bits with Ball Bearing, 2 Flute
- 1/2" Shank
- Carbide Height 1/8" to 3/4"
- Depth of Cut 1/16" to 3/16"
|
|
No Drip Design Counter Top Bits with Ball Bearing, 2 Flute
- 1/2" Shank
- Face Thickness 1/2" & 3/4"
|
|
No Drip Design Counter Top Bits, "L" Shape, 2 Flute
|
|
Rounding Over Bits with Ball Bearing, 2 Flute
- 1/4" & 1/2" Shanks
- Radius 5/16"
|
|
Under Rounding Over Bits with Upper Ball Bearing, 2 Flute
- 1/2" Shank
- Radius 1/2" & 3/4"
|
|
Corner Rounding Over Bits with Ball Bearing, 2 Flute
- 1/2" Shank
- Radius 1/2" & 3/4"
|
|
Bevel Undermount Bowl Bits with Ball Bearing, 2 Flute
- 1/2" Shank
- Material Thickness 1/2" & 3/4"
|
|
Roundover Undermount Bowl Bits with Upper Ball Bearing, 2 Flute
- 1/2" Shank
- Material Thickness 1/2" & 3/4"
|
|
Roman O-Gee Undermount Bowl Bits with Ball Bearing, 2 Flute
- 1/2" Shank
- Material Thickness 1/2" & 3/4"
|
|
Templet Guide Trim Bits with Ball Bearing, 2 Flute
- 1/2" Shank
- Overhang & Flush
|
|
Undermount Bowl & Countertop Trim Bit, 6 Wing
|
|
Topmount Router Bits with Ball Bearing, 2 Flute
- 1/2" Shank
- Countertop & Bowl Cuts
|
|
Topmount European Style Router Bits
- 1/2" Shank
- 3/8" Plunge, Bevel & O-Gee
|
|