Quality Tools at Discount Prices
Over 40,000 Hand and Power Tools.

Ph: 800-347-5096 Hours: M-F 6:30a - 4:30p (Pacific)

View Cart

Home

Gardner Bender Index

Cable Pullers & Accessories

Gardner Bender Cable Pullers & Accessories

Gardner Bender Mini Brutus Cable Puller CP2000

Gardner Bender Mini Brutus Cable Puller


CP2000	$1268.00

The Mini Brutus is a 2,000 pound pulling system that uses a standard Rigid or Mini-Collins pipe threader as the power drive unit.

CP2000 Features:

Rated for pulls up to 2,000 lbs. for light to medium duty pulls.
Self-contained design for quick setup and takedown.
Adjustable arm fully extends to 70"
Extended height to 9' 8" for convenience.
44" x 13½" x 18" collapsible frame
5½" wheels
Pulls lighter loads up to 18' per minute to avoid wire installation damage.
Power drive unit is not included.

Do you have questions about any of these products?
Chat LIVE with one of our tool specialists.
Mon. - Fri., 6:30 a.m. - 4:30 p.m. Pacific Time or call us at 800 347-5096

Gardner Bender Brutus Power Puller CP8000

Gardner Bender Brutus Powered Cable Puller


CP8000	Brutus Powered Puller for exposed or concealed conduit	$6531.75



CP8000D	Brutus Powered Puller for exposed conduit	$5421.00



CP8001	Brutus Powered Puller	$3888.25

Pulls up to 8,000 lbs.

Common Brutus Cable Puller Features:

Exclusive planetary gear design lets powerhead deliver smooth, sure power without breakage.
30% more pulling force than competitors models.
Versatile frame mounts power head almost anywhere.
Frame assembles in numerous configurations.
No chains or sprockets to break.
Powerful 1½ hp motor starts under full load. Capstan is non-reversing with back stop brake. Will not reverse when power is shut off.
Load read-out meter indicates pulling load at all times; alerts operator to hung-up cable or other excessive conditions.
Two-way power head mounting adapts to tight corners.
Pulls 10 feet/minute without buckling or bending.
Tool-Gard heavy-duty metal case included.
Min 15 A, Max 30 A.

Part#	Description	Included in Model:
CP800	Power Head	All Models
CP503	2' Chain Assembly	CP8000 & CP8000D
CP505	8" Lock Pins	CP8000 & CP8000D
CP601	Conduit Frame Adapter	CP8000 & CP8000D
S-8512	12" Sheave	CP8000 & CP8000D
CM20	Metal Case with CM44 Casters	CP8000 & CP8000D
CP622	10" Lock Pins	CP8000
CP631	Boom Extension	CP8000
CP701	Puller Base Extension	CP8000
CP702	Coupling Clamp	CP8000
CP703	Adjustable Pipe Adapter	CP8000
CP706	3" Conduit Coupling	CP8000
CP707	3½" Conduit Coupling	CP8000
CP708	4" Conduit Coupling	CP8000
CP709	6" Lock Pin	CP8000
HS-8512	12" Cable Sheave with Hook	CP8000
CP80	Floor Mount Kit	CP8001

Gardner Bender Brutus Powered Puller Sub-Assembly Kit

Gardner Bender Power Head Assembly CP800

Gardner Bender Power Head Assembly


CP800	$3397.75

May be purchased as an addition to existing cable puller sets.

CP800 Features:

CP801 Power Head
Base Mounting Bracket

Gardner Bender Brutus Floor Mount Kit Sub-Assembly Kit CP80

Gardner Bender Brutus Floor Mount Kit CP80

Gardner Bender Floor Mount Kit


CP80	$435.75

May be purchased as an addition to existing cable puller sets.

CP80 Features:

Floor Mount with Anchors

Gardner Bender Conduit Frame and Sheave Sub-Assembly Kit CP600

Gardner Bender Conduit Frame and Sheave Assembly. CP600

Conduit Frame & Sheave Assembly


CP600	$1311.75

May be purchased as an addition to existing cable puller sets.

CP600 Features:

CP503 2' Chain Assembly
CP505 8" Lock Pins
CP601 Conduit Frame Adapter
S-8512 12" Sheave

Gardner Bender Puller Base Extension Sub-Assembly Kit CP700

Gardner Bender Puller Base Extension Kit CP700

Gardner Bender Puller Base Extension Kit


CP700	$1348.50

May be purchased as an addition to existing cable puller sets.

CP700 Features:

CP503 2' Chain Assembly
CP505 8" Lock Pins
S-8512 12" Sheave
CP701 Puller Base Extension
CP702 Coupling Clam
CP703 Adjustable Pipe Adapter
CP706 3" Conduit Coupling
CP707 3½" Conduit Coupling
CP708 4" Conduit Coupling

Gardner Bender Lock Pin 6 In for cable-puller sets

Optional Equipment for Gardner Bender Powered Cable Pullers

Optional Equipment for Cable Pullers





HS-8512	12 In. Cable Sheave with hook	$438.50



RST-7530	Dbl. Braided Pulling Rope, 3/4 In. x 300 Ft.	$791.75



RST-7560	Dbl. Braided Pulling Rope, 3/4 In. x 600 Ft.	$1590.75



CP10	Load Readout Meter (Only CA1064001)	$479.75



CP15	Foot Operated Switch	$459.75



CP504	Chain Assembly, 6 Ft.	$240.00



CP704	Conduit Coupling, 2 In.	$171.00



CP705	Conduit Coupling, 2-1/2 In.	$171.00



CP806	Capstan (standard) 10'/min.	$818.00

The above items may be purchased as additions to existing cable-puller sets.

Gardner Bender 12 In. Cable Sheave with hook HS-8512

Gardner Bender Hook Sheaves


HS-8512	12 In. Cable Sheave with hook	$438.50



HS-8518	Hook Sheave, 5 In. wide, 18 In. diameter	$927.00



HS-8524	Hook Sheave, 5 In. wide, 24 In. diameter	$926.50

Suspends cable overhead and reduces strain on pulling equipment.

Hook Sheave Features:

Keeps cable together for easier manageability and enables direction of cable to be changed.
Sheave made of rugged aluminum alloy. Hook frame made of welded steel.
Rated at 8,000 lb capacity.

Gardner Bender Wire and Cable-Pulling Tension Meter TM5

Gardner Bender Tension Meter, 10,000 lbs capacity TM5

Gardner Bender Wire & Cable Pulling Tension Meter


TM5	$818.00

Monitors tension throughout the pull to prevent over-stressing cable. Perfect for use with powered pullers.

TM5 Features:

Self-contained hydraulically-operated meter measures in 200 lb increments up to 10,000 lbs maximum capacity.
Maximum-indicating pointer helps read pre-selected loads.
± 2% accuracy.
Comes with certificate of calibration.
Minimum Reading 1,000 lbs; Increments 200 lbs.

Gardner Bender Main Index

Home Page: Rothenberger, Klein, Milwaukee, etc.


		Homepage \| Tool Search \| View Cart \| FAX Order \| Tell a Friend \| Contact Us

Sales/Info 800-347-5096

FAX (702) 871-2815