- Fiber Optic and Copper Gigabit Qualification - Qualify copper and fiber-optic cabling to IEEE 802.3 standards
- Multimedia Gigabit Qualification (Multimode and Single Mode capability) - Qualify short and long range cabling to a distance of up to 10km
- BERT and Optical Attenuation Measurements - Perform Bit Error Rate Testing and decibel (dB) loss measurements of optical links.
- Dual Wavelength Capability - available in both 850nm and 1300mn wavelengths to support virtually all LAN and campus fiber applications.
- Small Form factor Pluggable (SFP) modules are compact, light-weight and field changeable.
- Storage and Reporting for Thousands of Reports - Store and print Qualification reports for copper and fiber jobs using internal memory or USB "thumb-drives".
|
In addition to cable performance qualification, SIGNALTEK™ can be configured to run for several minutes or hours at a time. While stress testing critical network links, SIGNALTEK™ transmits hundreds of Gigabits of information
across the network while looking for dropped packets. This monitoring mode allows SIGNALTEK™ to be used to isolate intermittent network problems that are difficult to detect. Adopting the latest generation of Gigabit Ethernet technology, IDEAL’s
innovation brings the best performance to this new class of affordable testers.
- Ports/Connections
- USB A/B, DC power input
- Shielded RJ-45 Port :Supports 10/100/1000Mbps Ethernet connections
- Small Form-factor Pluggable (SFP): Supports SFP modules sourced through IDEAL Industries in 850nm and 1300nm wavelengths, 1000Mbps Ethernet
- SFP-850 - 850nm Module
- Class 1 Laser EN60825-1
- Compatible fiber types: 50/125 µm or 62.5/125 µm graded index multimode fiber
- Power Output (dBm): -9.5min, -3max
- Receiver Power Range (dBm): 0 to -20
- Max Link Length: 550m (1800ft) on 50/125 µm fiber; 300m (985ft) on 62.5/125 µm fiber
- Operating Temperature: -10 to 85°C (14 to 185°F), 85%RH non condensing
- SFP-13X0 - 1300nm Module
- Class 1 Laser EN60825-1
- Compatible fiber types: 50/125 µm or 62.5/125 µm graded index multimode fiber and 9/125mm step index single mode fiber
- Power Output (dBm): -9min, -2.5max
- Receiver Power Range (dBm): 0 to -22
- Max Link Length: 550m (1800ft) on 50/125 µm fiber; 300m(985ft) on 62.5/125 µm fiber; 10km (6.2mi) on 9/125 µm fiber
- Operating Temperature: -10 to 85°C (14 to 185°F), 85%RH non condensing
- Length Measurement
- RJ-45 Port: TDR length measurement of 1-4 pair cables to 140m/460ft
- SFP Port: No length measurement of fiber optic cables
- Bert Error Rate Measurements
- Copper: 10/100/1000Mbps. Error rates tested to IEEE 802.3ab standard
- Fiber: 1000Mbps. Error rates tested to IEEE 802.3ab standard.
- Battery Life: Standard AA Alkaline Batteries
- Copper Testing: Approx 15 hours @ 22 tests per hour (45s Autotest)
- Fiber Testing: Recommend use of AC adapters when testing fiber
|
- 1 SIGNALTEK fiber ready near-end and 1 remote-end handset
- Carrying case
- Copper cable accessory kit with interfaces to RJ45, RJ11,Coax F-Type cables, and alligator clips
- Fiber optic cable accessory kit: 2 duplex LC-SC 50/125 µm (2m/7ft) cables, 2 duplex LC-SC 62.5/125 µm (2m/7ft) cables, 1 duplex SC-SC adapter.
- 8 AA alkaline batteries
- 2 AC power adapters with international plugs
- USB interface cable
- 1 CD-ROM User Manual
- 1 Training DVD
|
Ideal Tool Index 
