Air Hold Fitting Set
KD 901 |
$5.75
|
Use to apply air pressure to keep valve closed while replacing valve spring. Set includes 14 and 18mm adapters threaded for 1/4" NPT. To use, remove spark plug and screw air hold into port. Fasten air hose to fitting and apply pressure. Use with 912, 2078, 3087 or 3271 Valve Spring Compressors. Caution: Vehicle must be placed in park/neutral before applying air pressure, otherwise vehicle may move. Keep hands clear of fan, belts and pulleys since slight crankshaft rotation will occur. |
 |
14 and 18MM Air Hold Extention Hose
KD 2992 |
$9.00
|
A 14"-long hose incorporates special 14 and 18mm stepped fittings with 0-ring seals for universal fit and 1/4" NPT fitting for easy connection to air lines. Used with Valve Spring Compressors 912, 2078, 3087 and 3271, long hose is ideal for reaching deep set spark plug holes. Caution: Vehicle must be placed in park/neutral before applying air pressure, otherwise vehicle may move. Keep hands clear of fan, belts and pulleys since slight crankshaft rotation will occur. |
 |
Quickie Hydraulic Tappet Remover
KD 2114 |
$18.75
|
Removes valve tappets that are not stuck or baked-in. Tool can be used with most manifolds in place. To use, place jaws into groove on inside of tappet, squeeze knob and T-handle and pull to remove. This tool is patented. |
 |
VALVE GRINDERS
Also see:
Wood's Powr-Grip Valve Grinder
Hand grind small and large flat-head unslotted valves. Textured handle and thin wall suction cups make grinding easy. To use, place grinding compound on valve face and put in seat. Put suction cup on valve head and turn handle between hands to grind. There are 2 sizes per tool:
|
Grinder for smaller Values
KD 501 |
$5.25
|
Suction cup sizes: 5/8 and 13/16".
| |
|
Grinder for most Values
KD 505 |
$4.75
|
Suction cup sizes: 1-1/8 and 1-3/8". |
 |
KD Tools Index
View
Cart
|
FAX Order | Tell
a Friend | Contact Us 
