- A drop-forged, heat-treated bull pin which increases efficiency by providing
a larger striking surface.
- Design of the head also reduces chance of pin slipping from the hand when
aligning holes.
- Angled head and smooth blending of radii increase strength and reduce the
danger of chipping.
- Below the head, squared-off shoulders have been forged to provide a surface
for applying wrench to loosen wedged bull pins.
- Long, even taper reduces binding and hang-up.
- Klein broad-head bull pins offer added resistance to
"mushrooming", permitting much longer use than is possible with conventional
designs.
- Black finish.
- Note: OSHA specifically states that, "impact tools such as drift
pins, wedges, and chisels, shall be kept free of mushroomed heads."
|
| 3255 |
$17.50 |
|
| Top Diameter |
Point Diameter |
Length |
| 1-1/4" (31.8 mm) |
5/16" (7.9 mm) |
13" (330 mm) |
|
|
| 3256 |
$17.50 |
|
| Top Diameter |
Point Diameter |
Length |
| 1-1/16" (27.0 mm) |
1/4" (6.4 mm) |
10" (254 mm) |
|
|
| *All dimensions are nominal |
|
