Deceleration Unit:
Overlapped nylon webbing is heavily cross-stitched
together with nylon thread and sewn into a protective break-away jacket for optimal
fall-arrest impact reduction.
Progressive tearing away of nylon stitching absorbs most of a fall-arrest
impact.
A fully released deceleration unit extends the original length of a lanyard by a
total of 3.5 ft. (1.1 m) and virtually eliminates rebound.
Deceleration units are available separately or with
permanently attached lanyards made of nylon rope, aircraft cable,
or nylon webbing.
All Klein deceleration units are certified and compliant with ANSI and CSA
requirements.
On Klein deceleration units, a red warning label stitched to the overlapped nylon
webbing inside the protective break-away jacket will identify a used lanyard and
direct the disposal of the unit.
WARNING: Deceleration units are designed solely for use in fall-arrest
systems.
| Aircraft-Cable: |
| Exposure to Excessive Heat |
Excellent resistance. |
| Exposure to Chemicals |
Excellent resistance. |
| Exposure to Molten Metal or Flame |
Good resistance. However, coating may melt or
char. (Will not resist the flame of a torch.) |
| Exposure to Paints or Solvents |
Excellent resistance. |
| Exposure near Live Electrical Lines and
Equipment |
Poor protection (no dielectric strength).
Provides no protection against exposure to live electrical lines or
equipment. |
When using any Klein Occupational Safety Equipment,
always follow the A-B-C
rule.
|
Decelaration Unit with
Aircraft-Cable Lanyard - D-Ring
 |
Features
- Durable forged circle D-ring has
corrosion-resistant finish, friction-minimizing roller; and is
proof-loaded to meet OSHA regulations.
- Equipped with one drop-forged steel,
corrosion-resistant Klein-Lok locking snap-hook with 11/16"
(17mm) throat opening.
- Deceleration unit is attached to a
vinyl-coated flexible steel cable that is 7/32" (6 mm) in
diameter and has a total diameter of 9/32" (7 mm).
- Aircraft-cable lanyards can be used
around hazards such as open flame, rough-edged structural members,
and welding splatter: They will not, however, resist the flame of a
torch.
- Typical applications include anchoring to
I-beams, columns, piers, and oil-rigs.
- Designed solely for use in fall-arrest
systems.
|
| 87412 |
5' (1.5 m) Length |
$82.75 |
|
|
Klein Tool
Index 
