The Balldriver® Hex End |
 Balldriver® keys have a patented ball design that allows for a thicker neck diameter increasing torque capacity while maintaining operational angles to 25%. Close tolerances mean consistent performance at operational angles.
|
Manufactured by:
A Subsidiary of Klein Tools
|
| Always wear approved eye protection.
|
NOT insulated. Will NOT protect against electrical shock.
|
| DO NOT use pipe or similar extension to increase leverage.
|
|
Ball-End Hex Key Caddy Sets
L-Style
- Ball-end hex keys permit easy access even in restricted or hard-to-reach areas.
- Made from 8650 top-grade alloy steel, heat-treated and tempered for added strength.
- Surfaces are treated for rust and corrosion resistance.
- Heavy-gauge plastic caddy with locking feature and marked slots for each key size.
- Inch and metric sizes.
Ball-end hex keys work on angles up to 25° to turn hard-to-reach, hard-to-see socket screws. |
 |
 |
| 12-Piece Set - Inch Sizes |
| BLK12 |
$15.75 |
|
| Set Contains |
| No. |
W |
B |
C |
| BL2 |
.050" |
19/32" |
2 29/32" |
| BL4 |
1/16" |
5/8" |
3 1/16" |
| BL5 |
5/64" |
21/32" |
3 1/4" |
| BL6 |
3/32" |
23/32" |
3 7/16" |
| BL7 |
7/64" |
3/4" |
3 5/8" |
| BL8 |
1/8" |
13/16" |
3 13/16" |
| BL9 |
9/64" |
27/32" |
4" |
| BL10 |
5/32" |
29/32" |
4 3/16" |
| BL12 |
3/16" |
1" |
4 15/32" |
| BL14 |
7/32" |
1 3/32" |
4 7/8" |
| BL16 |
1/4" |
1 3/16" |
5 5/16" |
| BL20 |
5/16" |
1 5/16" |
6" |
|
|
| 9-Piece Set - Metric Sizes |
| BLMK10 |
$15.25 |
|
| Set Contains |
| No. |
W |
B |
C |
| BLM15 |
1.5mm |
11/16" |
3 3/32" |
| BLM2 |
2mm |
13/32" |
3" |
| BLM25 |
2.5mm |
15/32" |
3 1/4" |
| BLM3 |
3mm |
17/32" |
3 15/32" |
| BLM4 |
4mm |
21/32" |
3 15/16" |
| BLM5 |
5mm |
25/32" |
4 11/32" |
| BLM6 |
6mm |
29/32" |
4 13/16" |
| BLM8 |
8mm |
1" |
5" |
| BLM10 |
10mm |
1 1/16" |
5 1/4" |
|
|
|
View
Cart
|
FAX Order | Tell
a Friend | Contact Us 
