Over 40,000 Hand and Power Tools.
|
Quality Tools at Discount Prices
Over 40,000 Hand and Power Tools. |
|
|
 |
Ph: 800-347-5096 Hours: M-F 6:30a - 4:30p (Pacific) | View Cart |
 |
|
|||||||
|
The Lineman's Harness is a Fall Arrest harness permanently attached to a Lineman body belt. The 5249 Series Harness includes OSHA, ASTM, CSA applicable standard in medium and large sizes, leather Belt Pad 6 Ply Klein Kord™ Belt Strap, Chome tanned leather belt cushion, Wool shoulder pad, Nylon webbing, Latigo Leather Hood material. The harness application: Climbing and Fall Protection, plus, full floating body belt.
|
 |
||||||
|
|||||||
|
|||||||
| Fall-Arrest Harnesses have a fall-arrest D-ring attached to the upper middle of the back. Klein offers four styles of this full-body harness. The 87020 style harness has seat, chest, shoulder, and leg straps and a waist belt with friction-style buckle, designed to distribute impact forces of a fall over thighs, pelvis, waist, chest, and shoulders. This harness can also provide a positioning function by adding a Klein positioning belt, which inserts through special belt loops on the harness backstraps. The 87074 style harness is designed for workers on transmission towers and other elevated sites. It has an Ultra-Hyde® lined waist belt and leg straps designed to distribute impact forces of a fall over thighs, pelvis, waist, chest, and shoulders. The 87140 and 87141 Klein-Lite® style harnesses have lightweight polyester seat, chest, shoulder, and leg straps. The 87140 harness has leg straps with easy-connect hardware. The 87141 harness has leg straps with tongue buckles. |
 (Shown: 87140) |
||||||
|
|||||||
|
|||||||
| Fall-Arrest/Positioning Harnesses have a fall-arrest D-ring attached to the upper middle of the back and positioning D-rings attached to each side. Klein offers six styles of this full-body harness. These
harnesses are designed to hold a worker in place while leaving his hands free to work, and include seat, chest, shoulder, and leg straps. The 87810 style harness includes an integral positioning tool belt with a tongue buckle and Softee® Pad. The 87820 style harness includes an integral positioning tool belt with a friction buckle and Softee® Pad. The 87080 style harness has Ultra-Hyde® lined leg straps and an integral positioning tool belt with Ultra-Hyde® lining and a tongue buckle. The 87830 style harness has cushioned body and shoulder pads and features an integral positioning tool belt. The 87144 and 87145 style harnesses have lightweight polyester construction. The 87144 harness has leg straps with easy-connect hardware. The 87145 harness has leg straps with tongue buckles. |
 (Shown: 87810) |
||||||
|
|||||||
|
||||
| Fall-Arrest/Retrieval Harnesses have a fall-arrest D-ring (attached to the upper middle of the back) and two retrieval D-rings (attached to the harness shoulder straps and seat, chest, shoulder, and leg
straps). Klein offers two styles of this full-body harness. The 87090 style harness has an Ultra-Hyde® lined waist belt and leg straps. The 87840 style harness can also provide a positioning function by adding a Klein positioning belt, inserted through special belt loops on the harness backstraps. These harnesses are designed for retrieval of a worker from a tank, manhole, shaft, tunnel, or other confined or non-confined space. When used in accordance with OSHA 1910.146 Permit Required Confined Space procedures, the rear fall-arrest O-ring may also be connected to retrieval connecting devices that meet OSHA standards. |
 (Shown: 87090) |
|||
|
||||
|
||||
| Fall-Arrest/Suspension Harness has a fall-arrest D-ring (attached to the upper middle of the back), and two attached suspension D-rings (positioned in the lower front portion of the harness). Klein's 87012 style harness is a parachute-type, full-body harness with leg, seat, waist, chest, and shoulder straps, and it includes a V-sling suspension connecting
device. This harness keeps the worker in an upright position when the V-sling is held taut. The V-sling and front D-rings on the harness are for suspension purposes only and are NOT to be used for fall-arrest. |
 (Shown: 87012) |
|||
|
||||
|
||||
| Fall-Arrest Suspension Harness with Bosun's Chair features a fall-arrest D-ring (attached to the upper middle of the back), a suspension D-ring (attached in front), and an integral suspension chair (Bosun's chair) for extra comfort in normal use. Klein's 87044 style harness has leg, waist, chest, and shoulder straps that distribute fall-arrest forces over thighs, pelvis, waist, chest, and shoulders. |  (Shown: 87044) |
|||
|
||||
|
|||||
| Fall-Arrest/Positioning/Retrieval Harnesses have a fall-arrest D-ring (attached to the upper middle of the back), two positioning D-rings (one attached to each side), and two retrieval D-rings (one attached to
each of the harness shoulder straps). Klein's 87850 style harnesses have leg, seat, chest, and shoulder straps, and an integral positioning/tool belt
with tongue buckle. These harnesses allow for retrieval of workers from tanks, manholes, or other areas where retrieval may be required. |
 (Shown: 87851) |
||||
|
|||||
|
|||||
| Fall-Arrest/Positioning/Suspension Tree Trimmer's Harness features a fall-arrest D-ring (attached to the upper middle of the back), two positioning D-rings (one attached to each side of the belt), and two
upward-facing suspension D-rings (attached to each side of the harness seat straps). Klein's 87890 style saddle harness also features leg, seat, chest, and shoulder straps, an integral positioning/suspension saddle-style belt with tongue buckle, and a Softee® back pad and seat straps. This specialized harness, designed for tree-trimming professionals, meets ANSI Z-133.1. Know and follow ANSI Z-133.1 guidelines before using this harness. |
 (Shown: 87891) |
||||
|
|||||
|
|||||
| Fall-Arrest/Positioning Harness — Tower Work is ideal for workers on transmission towers and other elevated sites. Klein's 87962 style harness features a padded seat cushion for hours of comfort and support and a chest D-ring for convenient ladder-climbing applications. The seat cushion is removable and attaches with two snap hooks and includes two leather pads near connecting hardware for added comfort. A semi-floating lineman's style body belt with tool loops is built into the harness. Contoured shoulder pads help cushion the weight of the harness when fully loaded with equipment. |
 (Shown: 87963) |
||||
|
|||||
 |
Back to Klein O.P.E. Index |
 |
Back to Main Klein Tools Index |
 |
Home Page: Ideal, ExTech, Dewalt, etc. |
 |
 |
Homepage | Tool
Search
| 
View
Cart
|
FAX Order | Tell
a Friend | Contact Us |
 |
|
|
