Drill Bit Not Included
What's Included in Makita HR4010C:
- Side Handle (158057-6)
- D-Handle (417003-1)
- Depth Gauge (321248-4)
- Bit Grease (194683-7)
- Tool Case
|
|
| Makita - 2 Inch SDS MAX Rotary Hammer with AVT Technology |
| HR5210C |
$1011.24 |
|
 |
| Compare to Other Brands |
Makita 2 Inch SDS-MAX Rotary Hammer with AVT Features:
- Powerful 15.0 AMP motor delivers 1,075-2,150 BPM to handle the most demanding applications
- Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater productivity
- Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
- Soft start suppresses start-up reaction for more control and better accuracy
- Variable speed control dial enables user to match the speed to the application for greater versatility
- L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
- L.E.D. power light indicates switch failure or cord damage
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
- Sequential Impact Timing delivers timed hammering during rotation to minimize overlapping bit impacts resulting in up to 50% faster drilling
- Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
- Extended life brushes are longer for more work between service intervals and less downtime
- Automatic brush cut-off protects commutator from damage for longer tool life
- "No hammering when idling" function helps increase tool life
- 2-mode operation for "Hammering Only" or "Hammering with Rotation"
- One-touch sliding chuck for quick bit changes
|
| Makita 1-9/16 Inch SDS-MAX Rotary Hammer |
| Capacity - Concrete (w/ core bits) |
6-1/4" |
| No Load RPM |
130-260 |
| Blows/min.(BPM) |
1,075 - 2,150 |
| Impact Energy (J) |
20.0 Joules |
| AMPS |
14.8 ft.lbs. |
| Overall Length |
15.0 |
| Bit Type |
Accepts SDS-MAX Bits |
| Overall Length |
23-1/2" |
| Net Weight (lbs.) |
26.9 |
| Overall Length |
29.0 |
|
Makita Tools 
