Makita Demolition Hammers (11 - 22 Lb.)

Makita 11 Lb. Demolition Hammer Features:

• Accepts commonly used 3/4" hex and 21/32" round steel (same as spline shank rotary hammers)
• Compact and lightweight for maximum control
• Ideal for light chiseling, scaling and chipping operations
• Soft rubber grip side handle minimizes vibration and swivels 360 degrees for operator convenience
• Unique anti-vibration spring is positioned between tool body and rear handle for reduced operator fatigue
• One-touch tool retainer action for easy accessory installation and removal
• Carbon brushes last for approximately 150 hours
• Factory grease packed for reduced maintenance
• 2900 Blows/Min.
• 11.7 Lbs. - 8.3 AMPS
• Double insulated

Makita 11 Lb. Demolition Hammer Features:

• Bit can be set at 12 different positions for operation convenience
• Electronic variable speed adjusting dial for controlled operation
• Low vibration and noise levels for increased user comfort
• Service reminder light indicates when to replace carbon brushes
• Accepts commonly used SDS-Max bits
• Blows per Minute - 1,100-2,650
• Impact Energy - 11.4J
• AMPS (115V) - 10.0
• Vibration(m/s2) - 11.0
• Bit type - SDS - Max shank
• Overall length - 17 7/8 Inch 
• Weight - 10.4 lbs

Included with Makita HM0860C:

• Bit grease (181573-3)
• Plastic tool case (824708-0)

Makita 13 Lb. Demolition Hammer Features:

• Accepts SDS-Max bits
• Powerful 11.0 AMP motor to handle the most demanding jobs
• Ergonomically designed for comfortable handling
• Rubber coated rear and side handle for reduced vibration
• Side handle rotates 360 degrees and pivots forward and back
• Easy to operate push button on/off switch
• Electronic speed adjusting dial for controlled operation
• 16 angle settings of bit
• Automatic brush cut-out system
• Soft start feature
• 1300-2650 Blows/Min.
• 13.5 Lbs.
• Double insulated

Makita 20 Lb. Demolition Hammer Features:

• Accepts commonly used 3/4" hex shank bits
• Powerful 10.0 AMP motor (2,000 BPM) for fast and efficient operation
• Air cushion piston for longer tool life
• Comfortable rubber D-shaped grip side handle absorbs vibration; secures in four positions for operator comfort in any position
• One touch latch bit retainer for quick bit changes
• Automatic brush cut-out when periodic servicing is due
• Factory grease packed for reduced maintenance
• 20.7 Lbs.

Makita 20 Lb. Demolition Hammer Features:

• Accepts commonly used 3/4" hex and 21/32" round steel (same as spline shank rotary hammers)
• Powerful 13.0 AMP motor for maximum performance
• Electronic variable speed control (950-1900 BPM) for matching the hammering speed to the job
• Slide on/off switch for easy operation
• Comfortable rubber D-shaped side handle absorbs vibration; adjusts to 8 different positions forward and back
• One touch sliding chuck for easy bit installation and removal
• 12 angle settings of bit
• Dust proof chuck cap protects tool from damage from dust and debris
• Service reminder light indicates when to replace carbon brushes
• Double insulated

Makita 20 LB. Demolition Hammer Features:

• Accepts SDS-Max bits
• Powerful 13.0 AMP motor for maximum performance
• Electronic variable speed control (950-1900 BPM) for matching the hammering speed to the job
• Slide on/off switch for easy operation
• Comfortable rubber D-shaped side handle absorbs vibration; adjusts to 8 different positions forward and back
• One touch sliding chuck for easy bit installation and removal
• 12 angle settings of bit
• Dust proof chuck cap protects tool from damage from dust and debris
• Service reminder light indicates when to replace carbon brushes
• Double insulated