Milwaukee Diamond Coring Bits and Accessories

Milwaukee Premium Series Diamond Core Bits

Designed for fast, efficient cutting in a wide variety of concrete products ranging from poured, steel reinforced concrete to pre-stressed concrete and asphalt. During use, the crown of the bit is gradually worn away, continually exposing new diamonds for constant cutting speeds and long life. Before shipment, every Milwaukee diamond bit is "run-in" to properly expose the surface diamonds in the crown so no break-in period is required. Fast, accurate drilling for the entire life of the bit.

Milwaukee Contractor Series Solid Back Diamond Core Bits

The threaded adapter is an integral part of the Contractor Series Solid Back Diamond Core Bit. Precision machined and centered, the end of the adapter is threaded and flats are provided (on 1" and larger bits) for easy removal of DYMOBIT from the spindle of drill with open end wrench. 14" Core depth is standard.

MILWAUKEE CONTRACTOR SERIES CORE BITS - DYMOBITS

Crown and segment dimensions plus low cost make this bit a good, general purpose bit. Designed specifically for drilling smaller numbers of a specific size hole or where difficult drilling conditions may result in damage to more expensive longer life bits. Conforms to Diamond Core Drilling Manufacturers Association standards.

Milwaukee Contractor Series Diamond Core Bits - Dymobits for use with Milwaukee Diamond Coring Equipment

Outside Diameter	Thread Size	Part No.	List	Price	Order
2"	1-1/4"-7	48-16-2007	$247.00	$159.00
2-1/2"	1-1/4"-7	48-16-2507	$290.00	$173.25
3"	1-1/4"-7	48-16-3007	$328.00	$195.75
3-1/2"	1-1/4"-7	48-16-3507	$359.00	$214.25
4"	1-1/4"-7	48-16-4007	$383.00	$228.75
4-1/4"	1-1/4"-7	48-16-4257	$390.00	$253.75
5"	1-1/4"-7	48-16-5007	$489.00	$269.50
6"	1-1/4"-7	48-16-6007	$528.00	$291.00

MILWAUKEE PRE-STRESSED SERIES CORE BITS

These bits are designed specifically for the extra demands of drilling pre-stressed concrete. Segments reduces the risk of bit damage from pre-stressed steel and allows for the higher rpm necessary for a trouble free cut. The segments are silver brazed into a notched tube to offer exceptional holding strength.

Milwaukee Pre-Stressed Series Diamond Core Bits for use with Milwaukee Diamond Coring Equipment

Outside Diameter	Thread Size	Part No.	List	Price	Order
1"	5/8"-11*	48-16-1007	$162.00	$117.25
1-1/2"	5/8"-11*	48-16-1507	$207.00	$148.25
2"	1-1/4"-7	48-16-2014	$272.00	$167.75
2-1/2"	1-1/4"-7	48-16-2514	$282.00	$173.75
3"	1-1/4"-7	48-16-3014	$314.00	$194.00
3-1/2"	1-1/4"-7	48-16-3512	$348.00	$215.00
4"	1-1/4"-7	48-16-4014	$372.00	$230.00
4-1/2"	1-1/4"-7	48-16-4507	$408.00	$252.00
5"	1-1/4"-7	48-16-5014	$447.00	$253.50
6"	1-1/4"-7	48-16-6014	$502.00	$283.75

* To use with DymoDrills, requires threaded adapter (48-04-0160). See Below.

MILWAUKEE PREMIUM SERIES DIAMOND CORING BITS

Milwaukee Premium Series Diamond Coring Bits are designed to offer exceptional drilling life and speed in cured concrete with hard aggregate and medium steel reinforcement. Segments are laser welded to the tube. By popular demand of professional coring specialists, larger bits include silver brazed segments. Conforms to Diamond Core Drilling Manufactures Association standards.

Milwaukee Premium Series Diamond Core Bits for use with Milwaukee Diamond Coring Equipment

Outside Diameter	Thread Size	Part No.	List	Price	Order
3/4"	5/8"-11*	48-16-0756	$182.00	$131.00
7/8"	5/8"-11*	48-16-0876	$203.00	$140.00
1"	5/8"-11*	48-16-1006	$208.00	$143.25
1-1/4"	5/8"-11*	48-16-1260	$257.00	$165.25
1-1/2"	5/8"-11*	48-16-1506	$268.00	$172.50
2"	1-1/4"-7	48-16-2013	$371.00	$221.50
2-1/2"	1-1/4"-7	48-16-2513	$411.00	$245.25
2-3/4"	1-1/4"-7	48-16-2756	$427.00	$255.00
3"	1-1/4"-7	48-16-3013	$473.00	$260.75
3-1/2"	1-1/4"-7	48-16-3511	$537.00	$296.00
4"	1-1/4"-7	48-16-4013	$594.00	$327.25
4-1/2"	1-1/4"-7	48-16-4506	$689.00	$379.75
5"	1-1/4"-7	48-16-5013	$735.00	$405.00
6"	1-1/4"-7	48-16-6013	$895.00	$493.25
7"	1-1/4"-7	48-16-7006	$1300.00	$716.25
8"	1-1/4"-7	48-16-8006	$1310.00	$721.75
9"	1-1/4"-7	48-16-9006	$1795.00	$989.50
10"	1-1/4"-7	48-16-9506	$1892.00	$1042.25
12"	1-1/4"-7	48-16-9605	$2352.00	$1295.75
14"	1-1/4"-7	48-16-9705	$2772.00	$1527.00

* To use with DymoDrills, requires threaded adapter (48-04-0160). See Below.

48-04-0160	$47.25
THREAD ADAPTER Adapts thread size of 1-1/4"-7 to 5/8"-l 1 for DYMOBITS and extensions.

49-96-0085	$0.75
3/16 INCH HEX WRENCH For mounting DYMODRILLS to cradle.

49-67-0110	$85.50
SPACER ASSEMBLY For use with models 4125, 4130 and 4136. Mounts between cradle and DYMODRILL motor to increase VAC-U-RIG, DYMO-RIG bit capacity from 10" to 14".

49-67-0115	$104.75
SPACER ASSEMBLY For use with models 4115, 4120, 4115-21, 4115-22, 4120-21 and 4120-22.

Milwaukee Diamond Coring Spacer Assembly

48-95-1500	$68.25
9 INCH BIT EXTENSION Extension threaded on both ends with 1-1/4"-7 thread, for use with Diamond Core Bits over 2" diameter with 1-1/4"-7 thread. Extension mounts directly to DYMODRILL- up to two can be coupled together for extended coring.

48-95-2100	$89.00
10-1/2 INCH BIT EXTENSION Extension threaded on both ends with 5/8-11 thread, for use with 1-1/4" and 1-1/2" diameter Diamond Core Bits with 5/8"-11 thread. Extension requires 48-04-0160 threaded adapter for mounting to DYMODRILLS - up to two can be coupled together for extended coring.

Milwaukee Diamond Coring Bits & Accessories

Milwaukee Premium Series Diamond Core Bits

Milwaukee Contractor Series Solid Back Diamond Core Bits

MILWAUKEE CONTRACTOR SERIES CORE BITS - DYMOBITS

MILWAUKEE PRE-STRESSED SERIES CORE BITS

MILWAUKEE PREMIUM SERIES DIAMOND CORING BITS

MILWAUKEE CORE BIT ACCESSORIES

Milwaukee DymoDrills:

	Home Milwaukee Tool Index Diamond Coring Equipment Index Diamond Coring Bits and Accessories

	Milwaukee Electric Tools Index
	Milwaukee Diamond Coring Equipment Index
	MK Diamond Core Bits


		Homepage \| Tool Search \| View Cart \| FAX Order \| Tell a Friend \| Contact Us