MK Diamond Blades, Cup Wheels, Discs & Heads at Discounted Prices

Tile & Stone Blades
Wet Cutting Continuous Rim Blades for Tile and Stone: MK Diamond ceramic, stone, and glass blades blend superlative quality, performance, and value. These blades are manufactured to exact tolerances to ensure precise cutting, clean-cut edges, and long service life. They can cut through any type of ceramic tile and stone with minimum chippage. These blades are made to retain their cutting edge so that they'll consistently deliver high performance at a low cost.
New "Hot Dog" Blade	MK-100 Standard Bronze For Ceramic Tile Also Available in Economical Bulk Pack: 5 Blades per Pack
	MK-200 Premium Gold For Ceramic Tile & Slate Also Available in Economical Bulk Pack: 5 Blades per Pack
	MK-215 Supreme For Ceramic & Hard Vitreous Tile, Granite, Marble, Blue Stone & Glass Block
	MK-225 "Hot Dog" - NEW For Ceramic & Hard Vitreous Tile, Porcelain. Cuts 10% Faster. Lasts 20% Longer.
	MK-315 Super Hi-Rim For Ceramic & Hard Vitreous Tile, Slate, Limestone, Granite, Marble & Glass Block
	MK-415 Porcelain Tile For Hard Vitreous & Porcelain Tile, Slate, Limestone, Granite, Marble & Glass Block
	MK-215GL Glass Blades - NEW For Glass Block.
Wet-Cutting Segmented Rim Blades for Granite and Marble: Specially designed blades to handle the unique properties of granite and marble.
	MK-62G Wet Cutting For Granite
	MK-62M Wet Cutting For Marble
	MK-62GSL Wet Cutting - NEW For Granite. Super Hi-Rim. Laminated Silent Core Significantly Reduces Decibel Levels.
Wet-Cutting Segmented Rim Blades for Brick Pavers: Wet cutting masonry blades for brick pavers are specifically designed to provide efficient cutting.
	MK-10S Wet Cutting For Brick Pavers
Wet-Cutting Profile Wheels: MK-275 Profile Wheels provide clean professional contours for marble and granite. These tools ensure the highest quality of fast and uniform profiling, and are available in different geometric contours. MK Profile Wheels require no special saw modification and mount on most saws quickly and easily.
	MK-275 Profile Wheels 3/8" & 1/2" Radius, 45° Bevel, Ogee
Dry-Cutting Continuous Rim Blades for Hard/Vitreous Tile: The MK 304CR & 404CR Series are manufactured for fast, clean cutting of gereral ceramic and hard ceramic tiles. The finer continuous rim design and matrix specifications help deliver accurate cutting with minimal chipping.
	MK-304CR/404CR Dry Cutting For Hard/Vitreous Tile
Masonry Blades Learn About Understanding Diamond Blades As Cutting Tools
Dry-Cutting General Purpose Turbo Rim Blades: MK makes four series of turbo rim dry cutting masonry blades. These are true general purpose, "Jack of All Trades" blades for cutting in a wide variety of masonry materials using circular or miter saws. Each series is a step up in diamond content and hence longevity: Bronze, Standard, Silver and Gold. In addition, there are two Gold (Premium) series that have been specially formulated for cutting either hard or soft, abrasive materials.
	MK-625D Bronze For All Masonry Materials Also Available in Economical Bulk Packs: 5 Blades per Pack
	MK-725D Standard For All Masonry Materials
	MK-825D Silver For All Masonry Materials
	MK-925D Gold For All Masonry Materials
	MK-915D Premium For Hard Masonry Materials
	MK-950D Premium For Soft, Abrasive Masonry Materials
Dry-Cutting Continuous Rim Blades & DVS Turbo: Specially designed economical blades that outlast abrasive wheels 40 to 1. This blade is perfect for most masonry materials, stucco, cement siding and ceramics. Fits most popular 7-1/4" circular saws.
	MK-295GP Continuous Rim Dry For Most Masonry Materials, Stucco, Cement Siding and Ceramics Also Available in Economical Bulk Pack: 5 Blades per Pack
	MK-DVS Turbo - NEW Cooling slots in core keep blade cooler, let you cut faster!
Dry-Cutting Plank Kutter™: Uniquely engineered dry cutting continuous rim blade specially designed to tackle Fiber Cement Siding. This blade provides quick, clean cuts and lasting performance. For use on most electric/cordless circular saws.
	MK Plank Kutter™ For Fiber Cement Siding Available Only in Economical Bulk Pack: 5 Blades per Pack
Dry-Cutting General Purpose Segmented Rim Blades: MK makes eight series of general purpose segmented dry cutting masonry blades. Six of these are for cutting in a wide variety of masonry materials. Each series is a step up in either thickness or diamond content: Bronze, Economy, Standard, Gold, Premium and Supreme. Additionally, there are two Premium series blades that have been optimized for longer life in either hard or soft, abrasive materials.
	MK-299D/299SD Bronze For All Masonry Materials Also Available in Economical Bulk Pack: 5 Blades per Pack
	MK-799DE Economy For All Masonry Materials
	MK-799D Standard For All Masonry Materials
	MK-304D Gold For All Masonry Materials
	MK-400D Premium For All Masonry Materials
	MK-411D Premium For Hard Masonry Materials
	MK-420D Premium For Soft, Abrasive Masonry Materials
	MK-404D Supreme For All Masonry Materials
Dry-Cutting Flush Cut Blades:
	MK-304FC - NEW Flush Cut Blades
Brick & Block Blades Learn About Understanding Diamond Blades As Cutting Tools
Wet-Cutting Blades for Brick and Block: MK Diamond wet cutting masonry saw blades have a world-wide reputation for superior cutting of all types of masonry; from hard brick to soft abrasive block. New technology and state-of-the-art manufacturing processes assure value and performance.
	MK-10 Wet Cutting For Brick Available in Three Grades: Standard, Premium & Supreme
	MK-30 Wet Cutting For Brick & Block Available in Three Grades: Standard, Premium & Supreme
	MK-50 Wet Cutting For Block Available in Three Grades: Standard, Premium & Supreme
Wet-Cutting Refractory Blades: Refractory materials pose a very unique cutting challenge. The MK family of refractory diamond blades are specially manufactured to provide outstanding performance on all industrial refractories. MK blades are professionally engineered to recognize the specific compositions or other properties of refractory materials, and provide proven cutting performance and optimum blade longevity.
	MK-405R For Hard Dense Non-abrasive Fused Cast Brick
	MK-410R For Acid Proof, Chemically Resistant Brick
	MK-440R For High Alumina Brick, Corundum Class Brick
	MK-450R For Fireclay Brick, Superduty, High-duty, Semi-silica Brick
	MK-480R For Silica Brick, Conventional & Superduty, Mullite
	MK-490R For Silicon Carbide, Zircon
Dry-Cutting Blades for Brick and Block: Laser welded dry cutting masonry blades give you a big edge. MK dry masonry blades deliver a smoother, faster cut with less dust and a constant depth of cut. No other blade can come close to matching MK Diamond blades on a cost per cut comparison.
	MK-314D/414D Dry Cutting For Hard Brick Available in Two Grades: Standard & Premium
	MK-334D/434D Dry Cutting For Brick & Block Available in Two Grades: Standard & Premium
	MK-344D/444D Dry Cutting For Soft, Abrasive Block Available in Two Grades: Standard & Premium
Dry-Cutting Blades for Very Hard Brick: The MK-EM537 / MK-414DSP with scientifically designed cooling slots, provides superior perforamnce and durability. The specially formulated bond resists glazing of the diamond segments which ensures free cutting even on the hardest of materials.
	MK-414DSP Dry Cutting For Very Hard Brick
	MK-EM537D Dry Cutting Premium For Very Hard Brick
Dry-Cutting Brick Xtreme Blades: The MK-BX-10 / MK-BX-30 were specially designed for the portable BX-3 ("Brick Xtreme") saw.
	MK-BX-10 Dry Cutting - NEW For Hard Brick
	MK-BX-30 Dry Cutting - NEW For Brick & Block
Concrete & Asphalt Blades Learn About Understanding Diamond Blades As Cutting Tools
Wet-Cutting Segmented Rim Blades for Cured Concrete: The MK-500 Series of cured concrete blades provide the widest range of quality and performance. This series of cured concrete blades is the choice for many contractors who want performance but are also conscious of cost. Our line of wet-cutting blades offers a complete range of quality grades and blade specifications to ensure that you will always get maximum performance where it counts.
	MK-499 Economy For Cured Concrete Using 5 - 12 h.p. Saws - Diamond Depth: .187"
	MK-500 Standard For Cured Concrete Using 8 - 20 h.p. Saws - Diamond Depth: .187"
	MK-505 Premium For Cured Concrete Using 8 - 20 h.p. Saws - Diamond Depth: .250"
	MK-525 Supreme For Cured Concrete Using 12 - 25 h.p. Saws - Diamond Depth: .375"
Wet-Cutting Segmented Rim Pro Blades for Cured Concrete: The MK-Pro Series is designed and engineered for use on high horsepower, flat saws. This Professional Series is for contractors who insist on optimal performance. All Pro Series blades are available in a variety of bond hardnesses to assure maximum performance no matter what your job.
	MK-7501 For Cured Concrete Using 35 - 65 h.p. Saws Hard Aggregate, Non-Abrasive Sand
	MK-7502 For Cured Concrete Using 35 - 65 h.p. Saws Medium, Hard Aggregate
	MK-7503 For Cured Concrete Using 35 - 65 h.p Saws Soft Aggregate, Abrasive Sand
Wet-Cutting Segmented Rim Blades for Green Concrete: The MK-600 Series of green concrete blades are formulated to exacting specifications. Each specification is manufactured for superior performance and accurate cutting in the most challenging of job conditions.
	MK-600W Standard For Green Concrete Using 8 - 20 h.p. Saws - Diamond Depth: .187"
	MK-605W Premium For Green Concrete Using 8 - 20 h.p. Saws - Diamond Depth: .250"
	MK-610W Supreme For Green Concrete Using 12 - 25 h.p. Saws - Diamond Depth: .375"
Wet-Cutting Segmented Rim Pro Blades for Green Concrete: The MK-Pro Series is designed and engineered for use on high horsepower, flat saws. This Professional Series is for contractors who insist on optimal performance.
	MK-7601W For Green Concrete Using 35 - 65 h.p. Saws
Wet-Cutting Segmented Rim Blades for Asphalt: The MK-700W Series of asphalt blades are formulated to exacting specifications. Each specification is manufactured for superior performance and accurate cutting in the most challenging of job conditions. All blades are engineered with the proven drop segment design and a hardened steel, wear-resistant core for full blade utilization.
	MK-699 Economy For Asphalt Using 5 - 12 h.p. Saws - Diamond Depth: .187"
	MK-700W Standard For Asphalt Using 8 - 20 h.p. Saws - Diamond Depth: .187"
	MK-705W Premium For Asphalt Using 8 - 20 h.p. Saws - Diamond Depth: .250"
	MK-710W Supreme For Asphalt Using 12 - 25 h.p. Saws - Diamond Depth: .375"
Wet-Cutting Segmented Rim Pro Blades for Asphalt: The MK-Pro Series is designed and engineered for use on high horsepower, flat saws. This Professional Series is for contractors who insist on optimal performance.
	MK-7710W For Asphalt Using 35 - 65 h.p. Saws
Wet-Cutting Segmented Rim Blades for Asphalt Over Concrete: MK Asphalt Over Concrete blades are formulated to exacting specifications. Each specification is manufactured for superior performance and accurate cutting in the most challenging of job conditions. All blades are engineered with the proven drop segment design and a hardened steel, wear-resistant core for full blade utilization.
	MK-599 Economy For Asphalt Over Concrete Using 5 - 12 h.p. Saws - Diamond Depth: .187"
	MK-615W Standard For Asphalt Over Concrete Using 8 - 20 h.p. Saws - Diamond Depth: .187"
	MK-625W Supreme For Asphal Over Concrete Using 12 - 25 h.p. Saws - Diamond Depth: .375"
Dry-Cutting Segmented Rim Blades for Concrete & Asphalt: MK-Diamond dry-cutting blades are manufactured with the latest laser technology for added safety and greater efficiency. Engineered for fast cutting and long life, each dry-cutting specification offers peak efficiency and consistent depth of cut when cutting cured concrete, asphalt, and green concrete.
	MK-445D Premium For Cured Concrete Using 5 - 12 h.p. Saws - Diamond Depth: .187"
	MK-455D Supreme For Cured Concrete Using 5 - 12 h.p. Saws - Diamond Depth: .187"
	MK-465D Premium For Asphalt & Green Concrete Using 13 - 20 h.p. Saws - Diamond Depth: .250"
	MK-485D Supreme For Asphalt & Green Concrete Using 13 - 20 h.p. Saws - Diamond Depth: .250"
	MK-414D Supreme For Hard Materials
	MK-424D Supreme For Soft, Abrasive Materials
Wall Saw Blades Learn About Understanding Diamond Blades As Cutting Tools
Wet-Cutting Wall Saw Blades: The MK-Wall Saw Blade Series is distinctively designed to ensure that your equipment is operating at its highest performance level in all cutting conditions. All blades can be tailored to meet and exceed your job requirement. Each blade is specifically designed to material hardness and horsepower of the saw used. Our wall saw bonds range from very soft bronze bonds for sawing hard aggregate or high-steel content concrete with low horsepower saws, to abrasive resistant bonds for sawing abrasive stock walls with high horsepower saws.
	MK-435 Wall Saw Blades - NEW
Tuck Point & Crack Chaser Blades
Dry-Cutting Tuck Point Segmented Rim Blades: Specially designed for cleaning out mortar joints.
	MK-299DT Economy - NEW Also Available in Economical Bulk Pack: 5 Blades per Pack
	MK-304DT Premium Also Available in Economical Bulk Pack: 5 Blades per Pack
	MK-404DT Supreme
Wet/Dry-Cutting Crack Chasers: Use these long-lasting, diamond blades to cut down on resealing time. MK crack chasing blades quickly rout and widen cracks in both concrete and asphalt. Blades are available with 1/4" to 1/2" high diamond segments.
	MK-404DV Dry-Cutting Crack Chasers
	MK-8250/8375/8500 Wet-Cutting Crack Chasers
Ductile Iron Blades Learn About Understanding Diamond Blades As Cutting Tools
Dry-Cutting Ductile Iron Blades: MK Diamond's laser welded 404 Ductile Iron blade’s unique electroplate coating enables it to dissipate heat – thereby eliminate the rough edge caused by cutting – as well as providing a deburring action that helps to reduce binding during cutting. The deburring action also produces less drag and resistance than any other similar ductile blades. This decreased resistance means faster cutting action and efficiency combined with longer life. In fact, MK Diamond’s competitive testing shows that the MK Diamond Ductile blade cuts 20% faster than other blades that are similarly priced.
	MK-404 Ductile Iron - NEW

Grinding Cup Wheels, Discs & Heads
Dry Grinding Cup Wheels: MK Diamond's dry-grinding cup wheels have a unique shape which allow for superior form mark removal. These highly efficient cup wheels are also effective in the process of concrete deburring and rough-surface grinding. Their lightweight design and range of sizes ensure fast surface grinding with a minimum of operator fatigue.
	MK-304CG-1 Premium Single Row For De-burring & Mark Removal Also Available in Economical Bulk Pack: 5 Blades per Pack
	MK-304SG-2 Premium Double Row For Clean-up & Finish Work
	MK-404CG-1 Supreme Single Row For De-burring & Mark Removal
	MK-404SG-2 Supreme Double Row For Clean-up & Finish Work
	MK-504CG-1 Turbo Single Row - NEW For Aggressive Work
	MK-504SG-2 Turbo Double Row - NEW For Aggressive Work
Wet Grinding Discs: MK Wet Grinding Discs employ a unique turbo-style segment design to ensure both fast & clean grinding action, and smooth finishes to rough stone and tile surfaces.
	MK Wet Grinding Discs
Wet/Dry Grinding Heads: The MK-1010/MK-1020 Series of grinding heads are designed to give rough concrete surfaces the smoothest finish in the quickest time. Available in either 10 or 20 segments.
	MK-1010 & 1020 Grinding Heads For Cured Concrete - or Asphalt and Green Concrete
Polishing Pads & Kits
Wet Polishing Pads: These flexible, Velcro™-backed polishing pads are designed to achieve a scratch-free highly polished finish on all straight or contoured granite and marble edges. Their unique design allows for rapid and even removal rates with minimum effort. The center hole permits water lubrication during polishing operations. The Velcro™ backing allows for fast pad changes during the polishing process. Pads are color-coded for easy grit size identification.
	MK Polishing Pads 3 In., 4 In., & 5 In. 50 Grit to 8500 Grit
	MK Back Plate Discs 3 In., 4 In., & 5 In. with 5/8" - 11 Arbors
Dry Polishing Wheels: These 4" diameter wheels are for dry marble polishing, especially for bullnose and flat edge polishing. Maximum recommended speed is 4,000 RPM. These wheels fit 4" Makita® angle grinders. Sold in boxes of 10.
	MK PVA Dry Polishing Wheels 4 In., 40 Grit to 600 Grit
Hand Polishing Kit: Hand Block Kit Includes 70, 120, 220, 400, 600, 800, 1800 & 3500 grit polishing strips and ergonomically designed Velcro™ backed hand backplate.
	MK Hand Polishing Kit
Lapidary Blades and Core Bits Learn About Understanding Diamond Blades As Cutting Tools
MK Saber: The Saber blade is a significant breakthrough after years of research and development. Ultrathin and made of stainless steel. The Saber blade conserves gem materials and holds waste to a minimum. This makes it an ideal choice for such precious materials as sapphire, jade, ruby and opal. The Saber blade cuts at twice the speed of ordinary lapidary blades. The Ultrathin rim cuts with little chipping and leaves a remarkably smooth surface requiring less polishing time. Made in the U.S.A.
	MK 1000 Saber For Sapphire, Jade, Ruby and Opal
MK Professional: The MK 303 Professional™ series diamond blade is a premium quality, with the highest concentration of diamond. The MK-303 Professional™ produces smoother cuts and is used for cutting rare and valuable materials when waste must be held to a minimum and speed of cut is essential. The Professional series diamond blades last longer and will cut faster than ordinary notched-rim or plated-diamond blades. Made in the U.S.A.
	MK 303 Professional For All Rare and Valuable Lapidary Materials
MK Criterion: The MK-297 Criterion™ is the benchmark of the lapidary industry. The MK-297 diamond blade contains 30% more diamond concentration, the result of compressing the rim to exacting standards. The thickness of the 1010 cold rolled steel core remains the same and is both hand- and machine-tensioned for accurate cutting. Made in the U.S.A.
	MK 297 Criterion For All Lapidary Materials
MK Gemking: A superior notched rim lapidary saw blade with a high concentration of a special grade of man-made diamonds, in a new formulation that cuts hard materials, such as agate and petrified wood with unprecedented speed. Made in the U.S.A.
	MK 301 Gemking For All Hard Lapidary Materials Such as Agate and Petrified Wood
MK Lapidary Core Bits: Sizes from 3/16" to 3/4". Mount on Manta I and Manta III Diamond Core Rigs. Water Swivel Allows Use with Regular 1/2" (or Larger) Drills or Drill Presses.
	MK Lapidary Core Bits & Water Swivel For All Stone and Lapidary Materials
Diamond Core Bits
MK Wet Drilling Core Bits: MK Wet Drilling Core Bits combine precision engineering, high-tech manufacturing and top quality materials to ensure top performance in the wet drilling of cured concrete and aasphalt. MK offers a full line of core bits dedicated to accuracy, expedient drilling speed and optimum footage.
	MK Yellow Our standard core bit, an excellent choice for all types of general wet drilling. The MK-Yellow delivers fast drilling and good footage.
	MK Orange The MK-Orange is a premium bit, designed for wet drilling applications that would include light to moderate steel reinforcement. The high diamond concentration ensures excellent footage and cutting speed.
	MK Black The MK-Black is a supreme core bit, engineered for exceptional footage and fast/aggresive drilling characteristics. Excellent performance in applications associated with moderate to high steel reinforcement.