MK Continuous Rim Blades & Wet Cutting Blades for Tile and Stone

MK Diamond ceramic, stone, and glass blades blend superlative quality, performance, and value. These blades are manufactured to exact tolerances to ensure precise cutting, clean-cut edges, and long service life. They can cut through any type of ceramic tile and stone with minimum chippage. These blades are made to retain their cutting edge so that they'll consistently deliver high performance at a low cost.

Continuous Rim Blades
Series	100	200	215	225	315	415	215GL
Glass Block	•	•	•	•	•	•	Best
Granite	•	•	Good	Good	Better	Best	•
Hard Tile (Porcelain)	•	•	•	Best	•	Best	Better
Limestone	•	•	•	•	Better	Best	•
Marble	•	•	Good	Better	Better	Best	•
Slate	•	Good	•	•	Better	Best	•
Travertine	•	•	Good	•	Better	Best	•
Wall/Floor Tile	Good	Good	Better	Best	•	•	•

MK-100 Standard Bronze (For Ceramic Tile)
Part No.	Diameter	Rim Height	Width	List	Price	Order
158092	4" (102mm)	5.5mm	.060	$45.00	$28.25
154861	7" (178mm)	5.5mm	.060	$65.00	$36.00
154862	8" (203mm)	5.5mm	.060	$69.00	$42.75
154863	10" (254mm)	5.5mm	.060	$85.00	$51.00
Bulk Packs: 5 Blades per Pack
157668-BULK	7" (178mm)	5.5mm	.060	$270.00	$162.00
157667-BULK	10" (254mm)	5.5mm	.060	$300.00	$231.00

MK-200 Premium Gold (For Ceramic Tile & Slate)
Part No.	Diameter	Rim Height	Width	List	Price	Order
152578	3-3/8" (85mm)	7mm	.050	$35.00	$21.75
151445	4" (102mm)	7mm	.060	$53.00	$33.00
NEW 154972	4-1/2" (114mm)	7mm	.060	$57.00	$35.50
137141	6" (152mm)	7mm	.060	$71.00	$44.00
139295	7" (178mm)	7mm	.060	$81.00	$50.25
137158	8" (203mm)	7mm	.060	$85.00	$53.00
139303	9" (229mm)	7mm	.060	$99.00	$61.25
137166	10" (254mm)	7mm	.060	$106.00	$65.75
137174	12" (305mm)	7mm	.080	$194.00	$120.00
137182	14" (356mm)	7mm	.080	$213.00	$132.00
Bulk Packs: 5 Blades per Pack
157670-BULK	7" (178mm)	7mm	.060	$370.00	$228.00
157669-BULK	10" (254mm)	7mm	.060	$425.00	$297.00

MK-215 Supreme (For Ceramic & Hard Vitreous Tile, Granite, Marble, Blue Stone & Glass Block)
Part No.	Diameter	Rim Height	Width	List	Price	Order
152553	4" (102mm)	7mm	.060	$67.00	$41.50
131763	6" (152mm)	7mm	.060	$78.00	$48.75
139311	7" (178mm)	7mm	.060	$92.00	$57.00
131631	8" (203mm)	7mm	.060	$105.00	$65.00
139329	9" (229mm)	7mm	.060	$122.00	$75.75
128074	10" (254mm)	7mm	.060	$128.00	$79.25
128439	12" (305mm)	7mm	.080	$210.00	$130.25
133967	14" (356mm)	7mm	.080	$255.00	$158.00

MK-225 Hot Dog (For Ceramic & Hard Vitreous Tile, Porcelain, Granite & Marble) The new MK-225 "Hot Dog" porcelain tile blade brings improved performance to cutting porcelain tile. Through use of Micro Bead bond technology the MK-225 ensures a consistent cutting edge and eliminates the chipping of porcelain surfaces even with the hardest of tiles. The Patent Pending stiffening slot and ultra-thin kerf allow the MK-225 to cut with less drag and resistance than any other tile blade. This decreased resistance means longer blade life and increased cutting efficiency; lasts 20% longer and is 10% faster than other porcelain tile blades. Innovative tension slots prevent dishing and blade wobble.
Part No.	Diameter	Width	List	Price	Order
158434	7" (178mm)	.050	$85.00	$53.00
158435	8" (203mm)	.050	$92.00	$57.00
158436	10" (254mm)	.050	$120.00	$74.50
158571	12" (305mm)	.080	N/A	$122.50
158693	14" (356mm)	.080	$255.00	$158.00

MK-315 Super Hi-Rim (For Ceramic & Hard Vitreous Tile, Slate, Limestone, Granite, Marble & Glass Block)
Part No.	Diameter	Rim Height	Width	List	Price	Order
153250	6" (152mm)	9.5mm	.060	$102.00	$63.00
153293	7" (178mm)	9.5mm	.060	$119.00	$74.00
153251	8" (203mm)	9.5mm	.060	$128.00	$79.25
153252	10" (254mm)	9.5mm	.060	$158.00	$98.00
153509	12" (305mm)	9.5mm	.080	$264.00	$163.25
153548	14" (356mm)	9.5mm	.080	$297.00	$183.75

MK-415 Porcelain Tile (For Hard Vitreous & Porcelain Tile, Slate, Limestone, Granite, Marble & Glass Block)
Part No.	Diameter	Rim Height	Width	List	Price	Order
157511	7" (178mm)	9.5mm	.060	$140.00	$86.50
155152	8" (203mm)	9.5mm	.060	$166.00	$102.75
153495	10" (254mm)	9.5mm	.060	$180.00	$111.75
NEW 155619	10" (254mm) For use on MK-1070	9.5mm	.080	$200.00	$123.75
155129	12" (305mm)	9.5mm	.080	$270.00	$167.50
155130	14" (356mm)	9.5mm	.080	$356.00	$220.25

Dry Cutting Blades for Hard/Vitreous Tile

The MK 304CR & 404CR Series are manufactured for fast, clean cutting of gereral ceramic and hard ceramic tiles. The finer continuous rim design and matrix specifications help deliver accurate cutting with minimal chipping.

MK-304CR/404CR Dry Cutting (For Hard/Vitreous Tile)
Part No.	Diameter	Width	Arbor	List	Sale	Order
MK-304CR Standard
156090	4" (102mm)	.060	20mm - 5/8"	$27.00	$17.00
156090Y	4" (102mm)	.060	7/8 - 5/8"	$27.00	$17.00
157749	110mm	.060	7/8 - 5/8"	$32.00	$18.00
158139	4-1/2" (114mm)	.060	7/8 - 5/8"	$36.00	$22.25
157576	5" (127mm)	.060	10mm	$41.00	$25.25
157770	7" (178mm)	.060	DM - 5/8"	$65.00	$40.25
MK-404CR Premium
152661	3-3/8" (86mm)	.050	15mm	$41.00	$25.25
140277	4" (102mm)	.060	20mm - 5/8"	$53.00	$33.00
NEW 140277Y	4" (102mm)	.060	7/8 - 5/8"	$53.00	$33.00
NEW 154975	4-1/2" (114mm)	.060	20mm - 5/8"	$58.00	$36.00
154971	4-1/2" (114mm)	.060	7/8 - 5/8"	$58.00	$36.00
NEW 155535	5" (127mm)	.060	10mm	$60.00	$37.25
140285	5" (127mm)	.060	20mm - 5/8"	$60.00	$37.25
154034	5-1/2" (140mm)	.060	20mm - 5/8"	$65.00	$40.25
140293	6" (152mm)	.060	DM - 5/8"	$71.00	$44.00
140301	7" (178mm)	.060	DM - 5/8"	$87.00	$54.00
140319	8" (203mm)	.060	DM - 5/8"	$92.00	$57.00

	MK Diamond Blade Index
	MK Diamond Main Index
	Private Label Diamond Blades Top quality at great prices

		Homepage | Tool Search |  View Cart | FAX Order | Tell a Friend | Contact Us

Sales/Info  800-347-5096 © 1997-2008 mytoolstore.com by PCT FAX (702) 871-2815