|
|
|
| Model: |
Amps |
RPM |
Suggested
Diameter |
| Shear Pin Models: |
| 4090 |
15 |
375
750 |
5" - 8"
2-1/2" - 5" |
| 4094 |
20 |
450
900 |
6" - 10"
2" - 6" |
| 4094-S |
11.2
(230 Volts) |
450
900 |
6" - 10"
2" - 6" |
| 4095 |
15 |
500
1000 |
3" - 5"
1-1/4" - 3" |
| 4099 |
20 |
600
1200 |
4" - 7"
3/4" - 4" |
| Slip Clutch Model: |
| 4096 |
20 |
450
900 |
6" - 10"
2" - 6" |
|
| Suggested diameters listed on specific models are for maximum coring efficiency in medium aggregate. Speeds must be adjusted for material conditions. |
|
|
- Two Speed Dymodrill Motors For Use With Manta I and Manta III Diamond Core Rigs
- For Diamond Coring in Reinforced Concrete, Tile, Masonry, or Natural Stone
- Triple Reduction Gearing on All Models
- All Ball and Roller Bearings
- All Models Include: Built-in water swivel, adapter to receive standard water hose, water control valve, and an open end wrench for holding output spindle while removing bits.
- 15 AMP Models Provide Core Drilling Power Where 20 AMP Service is Unavailable
- 20 AMP Models Provide 4.8 Peak Horsepower to Maintain Higher Coring Speed and Produce Higher Torque for Maximum Core Drilling Production
Choose:
- Shear Pin Protection: Protects gears and motor against overload. Shear Pins easily replaced. Six extra pins (44-60-0032) included with each unit.
- Clutch Protection: Protects gears and motor against overload. Set to specifications at factory, no adjustment necessary.
|
| 4090 |
$629.55 |
|
| 15 AMP 375/750 RPM SHEAR PIN DYMODRILL |
|
| 4094 |
$650.00 |
|
| 20 AMP 450/900 RPM SHEAR PIN DYMODRILL |
|
4094-S
(MK-154817) |
$984.00 |
|
| 11.2 AMP/230VOLT 450/900 RPM SHEAR PIN DYMODRILL |
|
4095
(MK-155045) |
$756.00 |
|
| 15 AMP 500/1000 RPM SHEAR PIN DYMODRILL |
|
| 4099 |
$650.00 |
|
| 20 AMP 600/1200 RPM SHEAR PIN DYMODRILL |
|
| 4096 |
$650.00 |
|
| 20 AMP 450/900 RPM SLIP CLUTCH DYMODRILL |
|
|
MK Diamond Tools Index 
