Oldforge Automotive Specialty Tools Index

Oldforge Air / Pneumatic (.401 shank) Hammer Chisels, Hammers & Cutters, Scrapers, Punches

Oldforge Upholstery Clip Remover, Scrapers, Pry Bars

1958     Slotted Panel Cutter
1965     Muffler and Tailpipe Remover
1968     Tailpipe Cutoff Tool
1990     Idler Arm Bushing Cutter
1991     Control Arm Bushing Remover - 6 Inches
1972     Cold Chisel - 6 Inches
1973     Cold Chisel - 8 Inches
1974     Cold Chisel - 10 Inches
1986     Cold Chisel - 18 Inches
1975     Rivet and Bolt Cutter
1976     Scraper - 8 Inches
2010     Long Scraper - 17 Inches
2011     Long Taper Punch - 18 Inches
1979     Taper Punch - 6 Inches
1977     Sharp Point Taper Punch - 6 Inches
1978     Sharp Point Taper Punch - 18 Inches
1980     Straight Punch
1981     Hammer- 3 1/2 Inches
1993     Tie Rod Sleeve Breaker - 4 Inches
1995     Tie Rod Separator
1996     Ball Joint Rod Separator
1955     Body Ripper - 6 Inches
1956     Double Cut Body Ripper - 6 1/4 Inches
1957     Panel Cutter - 6 Inches
1984     Nut Splitting Tool - 10 Inches
1985     Nut Splitting Tool - 18 Inches
1960     Spot Weld Breaker - 6 Inches
1961     Radius Cutter - 6 1/4 Inches
1966     Inside Muffler Cutter - 8 1/4 Inches
1967     Outside Muffler Cutter - 8 1/4 Inches
1971     Splitting Tool - 8 1/4 Inches

1001     Upholstery Clip Remover
7039     Carbon Scraper
7025     Aligning & Pry Bar - 18 Inches Long
7028     Aligning & Pry Bar - 30 Inches Long
7238     Pry Bars With Handles - 26 Inches Long
7239     Pry Bars With Handles - 32 Inches Long

Oldforge Super Long Screwdrivers

Oldforge Tool Sets

5218P    18 Inch x #2 Phillips Screwdriver
6019     19 x 1/2 Inch Flat Screwdriver
5724     24 x 1/4 Inch Flat Screwdriver
37343    3 Piece Super Long Screwdriver Set

7365    4 Piece Scraper Set
7524    4 Piece Door Service Set
7360    4 Piece Pry Bar With Handles Set
66900   4 Piece Cold Chisel Set
66901   4 Piece Pin Punch Set
66902   4 Piece Punch Set
66907   3 Piece Alignment Punch Set
7323    3 Piece Long Pneumatic Tool Set
7322    9  Piece Professional Technician Pneumatic Tool Set

Oldforge Hub-Shark

Replace the front wheel bearing on front wheel drive cars without removing the knuckle from the vehicle, in about 20 minutes per wheel!

7325     Hub-Shark System

Home Page: Astro, OTC, S-K Tools, etc.


		Homepage \| Tool Search \| View Cart \| FAX Order \| Tell a Friend \| Contact Us

Sales/Info 800-347-5096

FAX (702) 871-2815