|
Omega Hydraulic Clutch Jack is designed for clutch/ flywheel removal and
installation. Intended use: to remove, install and transport (in lowest
position) both 14" and 15-1/2" clutches and flywheels. The two most
common spline sizes, 1-3/4" and 2" diameter, are included with this
product. The head plate enables clutch to be positioned in either horizontal
position for clearing underneath vehicle or vertical position for installation
and removal. The spline sleeve rotates 360 degrees, turns side to side and
vertically tilts for precise clutch alignment.
Features
- Handles 14" and 15-1/2" clutch assembly, removal and installation
becomes a one man operation.
- 1-3/4" and 2" spline rotates 360°, turns side to side and vertically
tilts for precise clutch alignment.
- Conveniently located release valve and 360° rotating pump handle allows
precise alignment when replacing a clutch.
- 4 swivel casters maneuver jack with ease.
|
| Specifications |
| Capacity |
500 lbs |
| Minimum Height |
16 1/2" |
| Maximum Height |
42" |
| Base Size - Dimensions |
44 1/2" (L) x 22 1/2" (W) |
| Weight |
160 lbs. |
| Spline Diameter |
1 3/4" & 2" |
|
Omega Lift Equipment 
