Panasonic 14.4V Rotary Hammer Kits

Panasonics EY7840LN2S 14.4V SDS Plus Rotary Hammer is a versatile tool built powerful and tough in a compact lightweight frame, focused on delivering continuous drilling into concrete, brick and block.

Features

• The Kit has two modes, hammer mode and drill mode.  In hammer mode it drills concrete with a speed of 0 -1,000 rpm and a maximum of 4,000 blows per minute with a hitting force of 21.6 Kn.  In drill mode it delivers a speed of 0-1,000 rpm for drilling and fastening into wood and metal.
• GuardION system monitors each battery cell during battery charging and during tool use to prevent over discharging and overheating of the battery pack thus insuring long life.
  
• 5 stage clutch that delivers 13 48 in.lbs. of torque in 9 in. lbs. increments. The convenient SDS bit adaptor allows you to fasten in concrete, wood and metal.  The chuck is a 5/8 capacity SDS-plus bit system utilizing a push to insert bit style with a one touch bit release for easy bit insertion and removal. 
• new air-coupling hammer mechanism for quick hole drilling into concrete.  The air system hammer uses compressed air to drive the piston
• LED Work Light that illuminates the work area when in use and an attachable shoulder strap for when both hands are in use. 
• 3.0ah Cobalt Li-ion battery pack. This battery pack delivers high output with low heat generation resulting in twice the lifetime total performance versus current Ni-Cd battery pack.
• Self diagnostic universal battery charger which electronically monitors the condition of each cell in the battery pack during the charging process to deliver full charging with minimal heat generation.