| FS 4800 D Specs |
FS 4800 D 14 |
FS 4800 D 18 |
FS 4800 D 26 |
FS 4800 D 30 |
FS 4800 D 36 |
| Blade Guard Capacity |
14" (355mm) |
18" (457mm) |
26" (660mm) |
30" (762mm) |
36" (914mm) |
| Blade Shaft RPM |
2900 |
2400 |
1800 |
1600 |
1350 |
| Max. Depth of Cut |
4½" (114mm) |
6½" (165mm) |
10½" (267mm) |
12" (305mm) |
15" (381mm) |
| Quick Disconnect Blade Flange Diameter |
4½" (114mm) |
5" (127mm) |
5" (127mm) |
5" (127mm) |
6" (152mm) |
| Arbor Size |
1" (25.4mm) with single drive pin. |
| Weight - Crated |
1433 lbs. (650kg) |
1443 lbs. (650kg) |
1453 lbs. (660kg) |
1473 lbs. (668kg) |
1493 lbs (677kg) |
| Weight - Uncrated |
1360 lbs. (617kg) |
1370 lbs. (621kg) |
1380 lbs. (626kg) |
1400 lbs. (635kg) |
1420 lbs (644kg) |
| Power Source for Husqvarna - Target FS 4800 D Concrete Saws: |
| Engine |
Diesel |
| Model |
Yanmar TNV88 |
| Max. Horsepower |
48 |
| Displacement |
133 cu. in. (2.19mm) |
| Bore/Stroke |
3.46" (88mm) x 3.54 " (90mm) |
| Cylinders/Stroke |
4/4 |
| Fuel Capacity |
7.8 gal. (29.5 liters) |
| Oil Capacity |
7.8 qt. (7.4 liters) |
| Air Filter |
Dual element radial seal |
| Starter |
Electric |
| Engine Cooling |
Liquid/Air |
| All Husqvarna - Target FS 4800 D concrete saws feature: |
| IntelliSeal Bladeshaft System |
500-hour service interval |
| Bladeshaft Diameter |
2" (51mm) |
| Bladeshaft Bearings |
2 radial ball bearing cartridges |
| Bladeshaft Drive |
12 belts (4 each 3band 3V belts) |
| Blade Guard Attachment |
Slip-on |
| Blade Control |
Electro hydraulic pump raises blade; switch controlled raise/lower on speed control handle.
Automatic blade depth control switch built into depth indicator - depth can be set with auto stop
function on depth indicator. Optional electric clutch - blade drive disengagement system. |
|
Axle, Front/Rear |
1-1/4" (25.4mm) diameter / 4-bolt hub mount |
| Wheels, Front/Rear |
6" x 2" (203mm x 51mm) / 10" x 3" (254mm x 76mm) |
| Handlebars / Adjustment |
Multiple positioning between -4° and 30° with 15" total height adjustment |
| Transmission |
Balanced dual motor hydrostatic drive system |
| Rear Pivot |
Electronically controlled hydraulic differential system locks rear wheels for positive traction to prevent slipping |
| Control |
Single linear control on console; forward, reverse, dynamic braking, neutral stop |
| Speed Front Pivot |
Infinite speeds: 0 to 200 FPM forward and reverse |
| Speed Rear Pivot |
Infinite speeds: 0 to 200 FPM forward and reverse with differential locked
Infinite speeds: 0 to 100 FPM forward and reverse with differential unlocked |
| Electric Tracking - Optional |
Full time electric switch operated adjustable tracking |
| Blade Clutch - Optional |
Electric switch-operated clutch allows engine to run without blade rotation |
| Chassis |
Welded box section construction |
Husqvarna - Target
