|
Hexplate with Super Clutch
See Hexpin Application Chart!
(For Surface, Condition and Job Use)
Diamond Hexpin Attachments for use with Hexpin Production Kits - HEX1PNC and HEX1PNG
Turbo Cut Hexpin (complete) - Diamond Hexpin Attachment for use with Hexpin Production Kits - HEX1FTC
Hexpin Pad Attachment for 15 Inch Hexplates
20% More grinding surface area then the competition |
Pearl Hexpin System - Pearl Hexplate with SuperClutch
Prevent the Buffer Coupler from breaking and Buffer damage using the Hexplates with SuperClutch. Features
- SuperClutch will disengage if the Hexpin Plate hits an obstruction (i.e. bolts).
- SuperClutch is self resetting - Simply turn off buffer and restart - less downtime.
- Manually resetting torque locks (red tabs) inside clutch housing will keep clutch from disengaging - easy manual disengagement.
- Protects operator from injury, protects buffer from damage and keeps buffer coupler from breaking.
|
| Hexplates with Super Clutch for 15" Hexplates |
| Part Number |
Description |
Price |
|
| HEX17CLTH |
15" Plate with Clutch Only |
$447.25 |
|
| HEX17QCCLT |
15" Plate with Clutch and 6 Quick Change Pins |
$555.75 |
|
| HEX17FTCCLT |
15" Plate with Clutch and 6 Turbo Cut Pins |
$587.50 |
|
| HEX17BPDCLT |
15" Plate with Clutch and 6 Hook and Loop Backing Pads |
$613.25 |
|
| HEX17CBDCLT |
15" Plate with Clutch and 12 Carbide Pins |
$774.00 |
|
| HEX1712CLT |
15" Plate with Clutch and 12 Green Diamond Pins (general purpose) |
$829.00 |
|
| HEX1712BCLT |
15" Plate with Clutch and 12 Blue Diamond Pins (hard bonded) |
$886.75 |
|
| HEX17CBD3CLT |
15" Plate with Clutch and 12 Carbide #3 Cutter Pins |
$892.75 |
|
| HEX17CBD4CLT |
15" Plate with Clutch and 12 Carbide #4 Cutter Pins |
$907.00 |
|
| HEX1712CCLT |
15" Plate with Clutch and 12 Gold Diamond Pins (course diamond) |
$913.25 |
|
| HEX17CUPCLT |
15" Plate with Clutch and 6 Diamond Cups |
$1187.75 |
|
Pearl Hexplate with Super Clutch Torque Locks can be locked into place if there is a problem with the clutch disengaging too often because of the job. Simply loosen the screws holding the torque locks and turn the long
end under the toothed slip ring. TIGHTEN THE SCREWS!
Pearl Hexpin System - Hexpin Production Kits
Diamond Hexpin Attachments Used - Designed to be used for grinding and sanding concrete surfaces.
HEX1FTC- Turbo Cut Hexpin (complete) - Specially engineered for coating removal where abrasive grains are more effective than customary scraping methods. Suited for light scarification
of coated surfaces, removal of urethane and rubberized coatings, sealers and light rust from metal surfaces. (See image)
| Hexpin Production Kits |
| Part Number |
Description |
Price |
|
| HEX17KTT |
HEX17CBD Plate with 12HEX1FTCpins |
$734.50 |
|
Pearl Hexpin System - Pearl Diamond Segmented Pad Attachments
Pearl has a NEW AND IMPROVED Diamond Segmented Pad (HEX4PAD) designed to be used on the 15" Hexplate. They are made with an overall larger grinding/sanding area which increases production. When attached to the 15"
Hexplate, the Diamond Segmented Pads extend past the edge of the plate allowing the operator to GRIND OR SAND RIGHT UP TO THE EDGE OF THE WALL.
| Hexpin Diamond Segmented Pad Attachments |
| Part Number |
Description |
Price |
|
| HEX15811 |
Quick Change Hexpin - unique Hexpin attachment with 5/8-11 reverse thread |
$26.75 |
|
| HEX1154 |
11" Plate with 5 Diamond Pads |
$735.75 |
|
| HEX1154CLT |
11" Plate with SuperClutch and 5 Diamond Pads |
$914.75 |
|
| HEX1764 |
15" Plate with 6 Diamond Pads |
$963.75 |
|
| HEX1764CLT |
15" Plate with SuperClutch and 6 Diamond Pads |
$1091.25 |
|
|
Pearl Abrasive Index 
