hand tools, power tools, discount prices
    Business Accounts GSA SmartPay
Ask Out Experts

MyToolStore Hours of Operation
Anniversary Logo
      Manufacturers Index     Tool Category Index     Tool Directory Index     Tool Compare Index     Tool Compare Index          
Home Pearl Abrasive Index Pearl Abrasive Floor Care Equipment and Floor Preparation System

Pearl Abrasive Co.

Pearl Abrasive Floor Care Equipment and
Floor Preparation System


Note: For orders shipping to AL, AZ, AR, CA, CO, FL, GA, ID, IL, IN, LA, MA, MI, MN, MS, NV, NJ, NM, NY, NC, OH,
OK, PA, SC, TN, TX, UT, VA, WA, or WI, local sales tax will need to be charged.

The Pearl HexPin SystemUse on all standard floor buffers and dual-headed diamond grinders, the Pearl Hexpin System is a tool that gives you choices when looking to increase productivity and profitability. Use the standard Hexpin Plates or Hexpin Blocks with our patented system of interchangeable Hexpins for grinding, sanding, polishing and coating removal.

Pearls unique spring-based technology allows the Hexpin Pad Attachments to float easily over rough surfaces while the fluted plate design helps maintain dust control, the optimum in Floor Care maintenance. Prevent the Buffer Coupler from breaking and Buffer damage using the Hexplates with SuperClutch. The Diamond Segmented Pad Attachments are made with an overall larger grinding/sanding area which increases production. When attached to the 15" Hexplate, the Pads extend past the edge of the plate allowing the operator to GRIND OR SAND RIGHT UP TO THE EDGE OF THE WALL.


Pearl Abrasive 17 Inch Hawk Buffer Heavy Duty Floor Machine
Hawk Buffer Heavy Duty Floor Machine




Pearl Hexplate 15 Inch

Pearl Hexplate 15"


Pearl Hexplate 11 Inch

Pearl Hexplate 11"

Pearl 10 inch concrete grinding wheel

Pearl 10" Concrete Grinding Wheel

Pearl Abrasive 17 Inch Hawk Buffer Heavy Duty Floor Machine


Pearl Abrasive Model HEX1BFRHK Features:
  • 1-1/2 HP Dual Capacitor Baldor AC Motor and SDP (Severe Duty Planetary)
  • 3 Idle Gear Box - 160 RPM
  • Long 50 FT. (14-3) Cord
  • Use with 15" Hexplates

17 Inch Hawk Buffer Heavy Duty Floor Machine
HEX1BFRHK 17 Inch Floor Machine $966.74 


Use the standard Hexpin Plates (Hexplates) with our patented system of interchangeable Hexpinsfor grinding, sanding, polishing and coating removal. Pearls unique spring-based technology allows the Hexpin attachments to float easily over rough surfaces while the fluted plate design helps maintain dust control.

Hexplates (Hexpin Plates) - The Pearl Hexpin System


15 Inch Hexplates for 17 Inch or 18 Inch Buffers
HEX1706EZ 15" Plate with 6 Diamond EZ Pads $783.74
HEX1712EZ 15" Plate with 12 Diamond EZ Pads $1086.74
HEX17QC 15" Plate with 6 Quick Change Pins $452.99
HEX17FTC 15" Plate with 6 Turbo Cut Pins $470.74
HEX17BPD 15" Plate with 6 Hook and Loop Backing Pads $534.74
HEX17CBD 15" Plate with 12 Carbide Pins $816.24
HEX1712 15" Plate with 12 Green Diamond Pins (general purpose) $803.24
HEX1712C 15" Plate with 12 Gold Diamond Pins (coarse diamonds) $831.74
HEX17CBD3 15" Plate with 12 Carbide Pins and #3 Cutter Pins $826.74
HEX1712B 15" Plate with 12 Blue Diamond Pins (hard bonded) $889.99
HEX17CUP 15" Plate with 6 Diamond Cups $1127.74
Production Kits
HEX17KTG 1 HEX17CBD Plate and 12 HEX1PNG pins $1017.24
HEX17KTC 1 HEX17CBD Plate & 12 HEX1PNC pins $1079.99

11 Inch Hexplates for 13 Inch Buffers or 11 Inch Single Head Floor Grinders
HEX1105EZ 11" plate with 5 diamond EZ pads $522.74
HEX1110EZ 11" plate with 10 diamond EZ pads $822.49
HEX1110B 11" Plate with 10 Blue Diamond Pins (hard bonded) $701.74
HEX1110C 11" Plate with 10 Blue Diamond Pins (course diamond) $701.74
HEX1110G 11" Plate with 10 Green Diamond Pins (general purpose) $643.74
HEX11CBD 11" Plate with 10 Carbide Pins $559.49
HEX11QC 11" Plate with 5 Quick Change Pins $374.49
HEX11FTC 11" Plate with 5 Turbo Cut Pins $422.74
HEX11CBD3 11" Plate with 10 Carbide # 3 Cutter Pins $596.74
HEX11CBD4 11" Plate with 10 Carbide # 4 Cutter Pins $612.99

Designed for grinding concrete. They are excellent for aggressive stock removal and give rough concrete surfaces the smoothest finish in the quickest time. Can be used on single-head floor machines and may also be attached to Pearl’s 11" Hexplate™ for use on the GRM11.

  • Available in 10 or 20 segments.
  • Wet or dry use. Fast grinding. Long life.
10 Inch Surface Grinding Plate for Single Head Floor Grinders or Pearl's 11 Inch Hexplate for use on the GRM11
HEX1GHP10 10" x 3/4 arbor, 4 holes • 10 Segments $205.99
HEX1GHP20 10" x 3/4 arbor, 4 holes • 20 Segments $305.74

Floor Machine Replacement Parts

16 In. Sanding Plate Attachments

16 Inch Sanding Plate Attachment


Heavy duty aluminum plate. 3/8" thick felt pad. Durable metal center casting. For use on 17"-18" floor buffer machines. It includes our HEXICLP clutch plate to fit most floor machines.

 
BUFFELT16 16 in. Replacement Felt Pad $18.49
BUFSPL16 16 In. Sanding Plate Attachment $192.24


16 In. Sanding Plate Attachments

3 Inch Diamond Disc Pads Hook and Loop Attachment


Proprietary Hybrid Resin Technology. Special non-marking resin. Thick crack resistant base extends pads life. Beveled edge improves polishing capability.

 
FSPD3050 3 x 50 Grit (olive) - Max rpm 200 $15.49
FSPD3 100 3 x 100 Grit (black) - Max rpm 200 $15.49
FSPD3200 3 x 200 Grit (red) - Max rpm 200 $15.49
FSPD3500 3 x 500 Grit (beige) - Max rpm 200 $15.49
FSPD31000 3 x 1000 Grit (white) - Max rpm 200 $15.49
FSPD32000 3 x 2000 Grit (royal blue) - Max rpm 200 $15.49
FSPD3BUFF 3 x BUFF (navy blue) - Max rpm 200 $15.49


Carbide Hexpin Attachment

Carbide Hexpin® Attachment


Designed and fitted with a replaceable, four sided, abrasion resistant, carbide insert. Use for scraping and removal of a variety of coatings and paints from concrete surfaces

HEX1CHIP Carbide Chip

HEX1CHIP Carbide Chip
Chip #1


Use in removing thinset, mastics, glue, rubber or foam backed carpet residue, dirt buildup, ice & paint.

 
HEX1CARB Carbide holder with #1 chip and screw (complete) $27.99
HEX1CRBH Carbide holder for #1 chip and diamond EZ pad $19.49


HEX3CHIP Carbide Chip Aggressive

HEX3CHIP Carbide Chip Aggressive Chip #3


Useful when taking up unusually difficult-toremove mastics and glue. The chip has a hole to secure the chip when working in rough conditions.

 
HEX3CARB Carbide holder with #3 chip and screw (complete) $37.49
HEX3CHIP #3 replacement carbide chip with screw hole $12.99
HEX3CRBH Carbide holder for #3 chip $22.99


HEX4CHIP Carbide Chip Very Aggressive

HEX4CHIP Carbide Chip Very Aggressive
Chip #4


WITH 8 SHARP EDGES! Best used to remove thin paint and epoxy from concrete, but works well for other concrete surface removal applications. So aggressive, we recommend that it only be used with the Hexpin® Super Clutch™ plate.

 
HEX4CARB Carbide holder w/ #4 chip and screw (complete) $37.49
HEX4CHIP #4 replacement carbide chip with screw hole $15.49
HEX4CRBH Carbide holder for #4 chip $22.99


Diamond Hexpin Attachment

Diamond Hexpin® Attachment


Designed to be used for grinding and sanding concrete surfaces. Pins offered in GREEN-general purpose, GOLD-heavy duty and BLUE-hard bonded pins for abrasive surfaces.

 
HEX1PNB Replacement hard bonded blue pins for abrasive surfaces $50.74
HEX1PNC Replacement coarse gold pins $50.74
HEX1PNG Replacement general purpose green pins $37.74

HEX-CUP Hexpin Attachment

HEX-CUP™ Hexpin® Attachment


Specially engineered 4" diamond cup wheels provide superior grinding on flat slab surfaces. Unique beveled edge design allows these Cup Wheel Hexpins® to glide easily over slab concrete surfaces.

 
HEX1CUP 4" cup wheel (coarse) $123.24

SuperClutch only

SuperClutch™ Only


Super Clutch™ will disengage if the Hexpin® Plate hits an obstruction (i.e. bolts). Super Clutch™ is self resetting. Manually resetting torque locks (red tabs) inside clutch housing will keep clutch from disengaging. Click here for more information about the Super Clutch

 
HEX1CLUTCH SuperClutch™ only $146.24

For 15 In. Hexplate - HEX1706EZCLT

For 15 Inch Hexplate™



 
HEX1706EZCLT 15 In. plate w/ clutch and 6 diamond EZ pads 985.74
HEX1712EZCLT 15 In. plate w/ clutch and 12 diamond EZ pads $1224.74

For 15 In. Hexplate

For 15 Inch Hexplate™


NO NEED to remove all chips or holders as the Hexpin® EZ pad is high enough to provide clearance so the carbide chips do not touch the work surface. ATTACHES FAST AND EASY TO HEXPIN® CARBIDE HOLDER! EZ pads can only be used on carbide holder #HEX1CRBH.

 
HEX1EZHLD Carbide holder (HEX1CRBH) with diamond EZ pad and screw (complete) $59.99
HEX1EZPAD HEXpin® diamond EZ pad $44.74

For 15 In. Hexplate

For 15 Inch Hexplate™


Pearl has a NEW AND IMPROVED Diamond Segmented Pad (HEX4PAD) designed to be used on the 15" Hexplate™. They are made with an overall larger grinding/sanding area which increases production. When attached to the 15" Hexplate™, the new and improved Diamond Segmented Pads extend past the edge of the plate allowing the operator to GRIND OR SAND RIGHT UP TO THE EDGE OF THE WALL.

All Pearl’s diamond segmented pad attachments are engineered with an overall larger grinding surface area than the competition. This extends the life and improves the all-around grinding speed and performance. Can be used wet or dry on concrete surfaces for grinding and coating removal.

20% MORE GRINDING SURFACE AREA THAN THE COMPETITION.

  • Use with your standard Hexpin® plates and block
  • Faster and more aggressive grinding
  • Wide diamond segments mean longer life
  • Easily removes trowel marks
  • Smoothes rough finishes
  • Provides texture to slippery surfaces
  • Prepares concrete surfaces for coatings
  • Removes sealers and bond breaker coatings

 
HEX4HLDR Pad holder only - incl. springs, nuts and washers $15.24
HEX4PAD-MFD Diamond pad only - 4 segments - includes nuts and washers $118.49
HEX4SEG-MFD Complete diamond pin holder with diamond pad $133.49

For 15 In. Hexplate

Replacement Parts for Plates and Blocks


 
HEX1CLP Clutch plate $13.74
HEX1SLV Replacement Carbide Sleeve $16.24

Turbo-Cut™ Hexpin® Attachment

Turbo-Cut™ Hexpin® Attachment

Specially engineered for coating removal where abrasive grains are more effective than customary scraping methods. Suited for light scarification of coated surfaces, removal of urethane and rubberized coatings, sealers and light rust from metal surfaces.

 
HEX1FTC Turbo-Cut™ Hexpin® (complete) $28.49
HX1FTCHL Turbo-Cut™ holder $20.49


Pearl Abrasive Pearl Main Index

MyToolStore See Diamond Blades by Diamond Vantage

Diamond Blades by Husqvarna See Diamond Blades by Husqvarna

MyToolStore Home Page: Felker, Diamond Blades, etc.



| Homepage | Tool Search | FAX Order | Tell a Friend |Contact Us | Report Errors with this page |
Gift Certificates = The Perfect Gift

Sales/Info  800-347-5096 4730 W. Spring Mountain Road, Suite B, Las Vegas, Nevada 89102 FAX (702) 871-1842

copyright 1997-2013 mytoolstore.com by PCT