Forged Hammer Tools

SCALING CHISELS
Use for: Removing scale, rust and concrete spatter
Fits Hammers:	Description	Part No.	Price	Order
Spline	12" OAL X 2"	SC-12S	$26.00
Spline	18" OAL X 2"	SC-18S	$28.75
SDS-max	12" OAL X 2"	SC-12MX	$28.00
SDS-max	18" OAL X 2"	SC-18MX	$31.50
SDS+	12" OAL X 1-1/2"	SC-12DS	$26.00
3/4" Hex	12" OAL X 2"	SC-12HX	$25.25
3/4" Hex	12" OAL X 3"	SC-312HX	$27.25

BULL POINTS or MOIL POINTS
Use for: Breaking up concrete, brick, asphalt, etc. Light demolition applications Starting holes in concrete slabs
Fits Hammers:	Description	Part No.	Price	Order
Spline	12" OAL	BP-12S	$17.00
Spline	18" OAL	BP-18S	$19.75
SDS-max	12" OAL	BP-12MX	$17.00
SDS-max	18" OAL	BP-18MX	$20.50
SDS+	12" OAL	BP-12DS	$19.25
3/4" Hex	12" OAL"	BP-12HX	$16.00
3/4" Hex	18" OAL"	BP-18HX	$17.75

SLOTTING CHISELS
Use for: Slotting in concrete and masonry Breaking web between predrilled holes in concrete to make large opening
Fits Hammers:	Description	Part No.	Price	Order
Spline	12" OAL X 1-1/8"	CR-12S	$28.75
SDS-max	12" OAL X 1-1/8"	CR-12MX	$32.00

ASPHALT CUTTER
Use for: Cutting asphalt or hard ground - not for concrete
Fits Hammers:	Description	Part No.	Price	Order
3/4" Hex	4" X 4-1/2"	AC-HX	$93.25

CLAY SPADE
Use for: Digging clay, dirt, hard-packed gravel, shale, etc.
Fits Hammers:	Description	Part No.	Price	Order
3/4" Hex	4" X 4-1/2"	CS-HX	$69.50

COLD CHISELS
Use for: Edging, chipping and channeling concrete, masonry or brick
Fits Hammers:	Description	Part No.	Price	Order
Spline	12" OAL X 1"	CC-12S	$17.00
Spline	18" OAL X 1"	CC-18S	$19.75
SDS-max	12" OAL X 1"	CC-12MX	$18.50
SDS-max	18" OAL X 1"	CC-18MX	$22.00
SDS+	12" OAL X 3/4"	CC-12DS	$19.25
3/4" Hex	12" OAL X 1"	CC-12HX	$16.00
3/4" Hex	18" OAL X 3"	CC-18HX	$17.75

BUSHING TOOLS
Use for: Roughing concrete surface prior to applying a surface finish Concrete surface removal to produce a rough exterior finish
Fits Hammers:	Description	Part No.	Price	Order
Spline	1 pc Bushing Tool	BT-16S	$68.00
SDS-max	1 pc Bushing Tool	BT-16MX	$70.75
S3/4" Hex	1 pc Bushing Tool	BT-6HX	$68.00
16 Pt. Bushing Head		BH-16	$28.75
Spline	Bushing Head Shank	BS-8S	$18.50
SDS-max	Bushing Head Shank	BS-8MX	$18.50
3/4" Hex	Bushing Head Shank	BS-8HX	$18.50

MORTAR CHISELS
Use for: Cleaning out old mortar between bricks and masonry prior to tuck pointing or caulking Cutting narrow channels
Fits Hammers:	Description	Part No.	Price	Order
Spline	15" OAL X 1-1/8"	MC-15S	$27.25
SDS-max	15" OAL X 1-1/8"	MC-15MX	$31.50

GROUND ROD DRIVERS
Use for: Driving electrical grounding rods into earth
Fits Hammers:	Description	Part No.	Price	Order
Spline	for 5/8" - 3/4" rebar	DR-S	$70.75
SDS-max	for 5/8" - 3/4" rebar	DR-MX	$73.50
3/4" Hex	for 5/8" - 3/4" rebar	DR-HX	$70.75

Back to Relton Index

Home Page: OTC, Starrett, Klein, etc.