WISDOM® Electronic Indicators by Starrett
No. 2700 Series AGD Groups 2, 3 and Rectangular
Ranges up to 4" and 100mm
This is our most versatile line of electronic indicators, available in three styles, in addition to a remote display and accompanying probe series.
All indicators feature a glass scale design with an unsurpassed accuracy of ± two resolutions when measuring from a known standard. All have rugged, sealed enclosures as well.
American designed and manufactured.
WISDOM Basic Series
- User Selectable Resolutions:
All available resolutions can be utilized in the same indicator, provided they are coarser than the resolution of the purchased model.
Example: selecting an indicator with the finest .00005"/0.00mm base resolution means you have all eight remaining resolutions "below" this which are usable in that model. If you select an indicator with a
.001"/0.02mm base resolution, it will be your only available resolution for that model.
- 10 resolutions and 5 measuring ranges available (see specifications)
- Instant inch/mm conversion
- Plus or minus travel direction
- Maximum Reading Hold
- Zero the tool at any position of the spindle
- Rotating bezel
- Auto Off: After 10 minutes of nonuse. When Auto Off is engaged, an hourglass figure appears at the left side of the display
- Serial number: Indicators are furnished with individual serial number labels, coded with date for traceability
- Three power sources – operate by battery, A/C adaptor or through data port
- The output jack allows data transmission, either through a traditional wire or by connecting to a Starrett DataSure® Wireless Data Collection System end node
- Output data can be used by a variety of peripherals for analysis, data collection and hard copy documentation, including:
- Starrett No. 772 Series Advanced Data Collection Systems
- Starrett No. 761 Series Data Multiplexers
- Other devices that support RS232C
|
 |
| Left, No. F2730-0; right, No. 2720-4. |
| |
 |
| Above: regular and oversized models. |
|
WISDOM Plus Series
These models have all the features and functions of the Basic Series, plus the following:
- Preset mode to install any reading at any point in the display. Reading is retained even if the indicator is turned off
- T.I.R.: Displays the difference between the highest and lowest values reached
- Tolerancing: Permits the entering of high and low tolerances. When tolerances are exceeded, the display will flash. Numbers are retained even if the indicator is turned off
- Minimum reading hold
- Hold button to freeze display: Displays and holds the reading after the measurement has been taken
- Feature lock: Unique feature locks user selections so that a wrong button push will not change your settings
WISDOM-OEM Indicators:
Starrett can customize WISDOM models to meet your needs. Any combination of features found in WISDOM Basic or Plus Series can be furnished. In addition, units can be designed with features such as:
- Special measuring ratios like 2:1, 4:1, etc.
- Other units of measurement (cm, lb., etc.)
- Custom LCDs, graphics
- Varying the auto-off after nonuse time (Example: 45 minutes vs. 10 minutes)
|
Starrett Tool Index 
