Inspection Holder and AGD Dial Indicators by Starrett
No. 665 Series
This is the most versatile dial indicator holder with an extremely stable base (A) that is 8-1/2" (215mm) long x 2-1/4" (57mm) wide at the bottom. It can inspect workpieces on the top surface of the ground base or within a working area defined
by the 8" (200mm) upright base post (B) and the 9-1/2" (238mm) long gage-holding rod (C). The base post can be conveniently located anywhere along the 8-1/2" (215mm) T-slot in the base.
This tool can be held in a vise or by a bolt in a machine T-slot coming up through one of the two 3/8" (9.5mm) holes in the base and fastening down on the top surface.
A great variety of mechanical AGD indicators and electronic indicators, Nos. 2600 and 2700 Series, are available on request. |
No. 665JZ with No. 25-131J Indicator |
Starrett Tool Index 
