Starrett Carbide Grit Band Saw Blades

These Starrett band saw blades will easily cut through most hard and abrasive materials.

Starrett Carbide Grit band saw blades are especially useful in cutting new and complex materials such as composite graphite, fiber-reinforced plastics and titanium. In some cases, they cut better than regular blades. In other cases, they`re the only blades that will cut when a regular band can`t.

Coils are furnished in 100' and 250' (30 and 45 m) lengths as listed below.

Top, Gulleted Edge Blade, bottom, Continuous Edge Blade.

How to use Starrett Carbide Grit band saw blades to best advantage:

For material 1/4" (13 mm) in thickness and above, use gulleted blades. Where surface chipping is possible or on brittle materials or material thicknesses less than 1/4" (13 mm), use continuous edge blades
Coarse grit is applicable for faster cutting of thick materials or metals
Finer grit is applicable on thin materials and fine finishing
Minimum machine wheel diameter of 240 (600 mm) is recommended for continuous band. Smaller diameters tend to increase fatigue and reduce blade life
Use widest applicable blade for straight cutting 30% reductions in cut radius can be achieved using grit blades instead of standard blades
Coolants are needed for most metal cutting and should be considered for glass and ceramics
Start cuts at lower speeds and gradually increase until the required performance is achieved
Metal cutting - a fine, stringy strip indicates the correct feed and band speed
Increase the life of the blade by turning the blade inside-out from time to time. This presents a new edge to the work

SAW BLADE INDEX

Starrett Carbide Grit Band Saw Blades - 100' Coil
Width x Thickness Inch (mm)	Tooth Type	Grit	Part No.	Price	Order
1/4" x .020" (6.5 x 0.50 mm)	Gulleted	Fine	95400-100	$1430.80
	Gulleted	Medium	95401-100	$1430.80
	Continuous	Medium	95402-100	$1430.80
3/8" x .025" (10 x 0.65 mm)	Gulleted	Medium	95403-100	$1456.00
	Gulleted	Medium-Coarse	95404-100	$1456.00
	Continuous	Fine	95405-100	$1398.75
	Continuous	Medium	95406-100	$1456.00
1/2" x .025" (13 x 0.65 mm)	Gulleted	Medium	95407-100	$1544.20
	Gulleted	Medium-Coarse	95408-100	$1544.20
	Continuous	Fine	95409-100	$1487.00
	Continuous	Medium	95410-100	$1544.20
1/2" x .020" (13 x 0.50 mm)	Gulleted	Medium	95412-100	$1544.20
	Gulleted	Medium-Coarse	95413-100	$1544.20
	Continuous	Medium	95414-100	$1544.20
3/4" x .032" (19 x 0.80 mm)	Gulleted	Medium	95416-100	$1638.00
	Gulleted	Medium-Coarse	95417-100	$1638.00
	Gulleted	Coarse	95418-100	$1638.00
	Continuous	Medium	95419-100	$1638.00
	Continuous	Coarse	95421-100	$1638.00
1" x .035" (25 x 0.90 mm)	Gulleted	Medium-Coarse	95422-100	$1751.40
	Gulleted	Coarse	95423-100	$1751.40
	Continuous	Extra Fine	95424-100	$1685.75
	Continuous	Medium	95425-100	$1751.40
1" x .042" (25 x 1.10 mm)	Gulleted	Medium-Coarse	95428-100	$1751.40
1" x .042" (25 x 1.10 mm)	Gulleted	Coarse	95429-100	$1751.40
1-1/4" x .035" (32 x 0.90 mm)	Gulleted	Coarse	95430-100	$1859.20
1-1/4" x .035" (32 x 0.90 mm)	Continuous	Coarse	95431-100	$1859.20
1-1/4" x .042" (32 x 1.10 mm)	Gulleted	Medium-Coarse	95432-100	$1859.20
1-1/4" x .042" (32 x 1.10 mm)	Gulleted	Coarse	95433-100	$1859.20

Starrett Carbide Grit Band Saw Blades - 250' Coil
Width x Thickness Inch (mm)	Tooth Type	Grit	Part No.	Price	Order
1/4" x .020" (6.5 x 0.50 mm)	Gulleted	Fine	95400-250	$3577.00
	Gulleted	Medium	95401-250	$3577.00
	Continuous	Medium	95402-250	$3577.00
3/8" x .025" (10 x 0.65 mm)	Gulleted	Medium	95403-250	$3640.00
	Gulleted	Medium-Coarse	95404-250	$3640.00
	Continuous	Fine	95405-250	$3885.00
	Continuous	Medium	95406-250	$3640.00
1/2" x .025" (13 x 0.65 mm)	Gulleted	Medium	95407-250	$3860.50
	Gulleted	Medium-Coarse	95408-250	$3860.50
	Continuous	Fine	95409-250	$4130.00
	Continuous	Medium	95410-250	$3860.50
1/2" x .020" (13 x 0.50 mm)	Gulleted	Medium	95412-250	$3860.50
	Gulleted	Medium-Coarse	95413-250	$3860.50
	Continuous	Medium	95414-250	$3860.50
3/4" x .032" (19 x 0.80 mm)	Gulleted	Medium	95416-250	$4095.00
	Gulleted	Medium-Coarse	95417-250	$4095.00
	Gulleted	Coarse	95418-250	$4095.00
	Continuous	Medium	95419-250	$4095.00
	Continuous	Coarse	95421-250	$4095.00
1" x .035" (25 x 0.90 mm)	Gulleted	Medium-Coarse	95422-250	$4378.50
	Gulleted	Coarse	95423-250	$4378.50
	Continuous	Medium	95425-250	$4378.50
1" x .042" (25 x 1.10 mm)	Gulleted	Medium-Coarse	95428-250	$4378.50
1" x .042" (25 x 1.10 mm)	Gulleted	Coarse	95429-250	$4378.50
1-1/4" x .035" (32 x 0.90 mm)	Gulleted	Coarse	95430-250	$4648.00
1-1/4" x .035" (32 x 0.90 mm)	Continuous	Coarse	95431-250	$4648.00
1-1/4" x .042" (32 x 1.10 mm)	Gulleted	Medium-Coarse	95432-250	$4648.00
1-1/4" x .042" (32 x 1.10 mm)	Gulleted	Coarse	95433-250	$4648.00

	Starrett Saw Blade Index
	Starrett Precision Measuring Tool Index

Starrett Band Saw Blades

Starrett Carbide Grit Band Saw Blades

Starrett Carbide Grit Band Saw Blades - 100' Coil

Starrett Carbide Grit Band Saw Blades - 250' Coil