Starrett Steel Rule Depth Gages
No. 237 Series
These very handy Starrett depth gages can be used to quickly obtain measurements in 64ths of an inch or 1/2 mm by simply adjusting the rule to the required depth.
- The gage consists of a nicely finsihed, hardened steel head and an accurate, machine divided, tempered steel rule
- Gage can be smoothly adjusted to the required measurement and then locked into position by a knurled nut
- Base is cut out on one side permitting easier readings and more accurate measurements
- Starrett No. 236HC Hook Rule is also available, permitting easier readings from the edge of a workpiece to the edges
of slots, shoulders, etc. Graduated in 32nds, 64ths
|
6" Steel Rule Depth Gage measuring
the depth of a blind hole. |
View
Cart
|
FAX Order | Tell
a Friend | Contact Us 
