| Bore Gages |
|
|
- Dial Bore Gages - No. 84 / 84M Series
An adjustable range screw and two centralizing plungers provide accurate, three-point contact for tool alignment in larger bores.
Ranges: 1-1/2-12-1/8", 38-308mm
|
| Depth Gages |
|
|
|
|
|
|
- Dial Depth Gage 450 Series
These accurate depth gages are light, reliable and accurate for measurements to .001" or 0.02 mm and will fit in most toolboxes.
Range: 0-6", 0-12", 0-150mm, 0-300mm
|
|
|
- Steel Rule Depth Gages 237 Series
Depth gages can quickly obtain measurements in 64ths of an inch or 1/2 mm by simply adjusting the rule to the required depth.
Range: 0-6", 0-150mm
|
|
|
| Fixed Gage Standards |
- English and Metric Thickness Gages
These gages are used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work.
Ranges: .0015-.200" (0.03-5mm)
|
|
|
|
|
- Thickness Gage - No. S667D
This inch-reading assortment consists of 108 pieces, 1/2" x 12", in nine different thicknesses from .0015" to .015" thick.
Ranges: .0015-.015"
|
| Height Gages |
|
|
|
|
|
|
- Dial Height Gage - 250 Series
Compact Height Gage for inspectors and machinists. Sharp, clear dial graduations of .001" or 0.02mm - .100" or 2mm in one revolution.
Range: 0-6", 0-150mm
|
| Hole Gages and Slot Gages |
- Telescoping Gages - No. 579 Series
Constant spring tension gives uniform contact pressure and both plungers are easily locked at any desired setting.
Ranges: 5/16-6" (8-150mm)
|
Starrett Tool Index 
