Quality Tools at Discount Prices
Over 40,000 Hand and Power Tools.

Welcome to our family of over 400,000 satisfied customers.

Ph: 800-347-5096 Hours: M-F 6:30a - 4:00p (Pacific)

Husqvarna - Target Core Drill Stands - DS 160 C & DS 50 Gyro

Husqvarna - Target Core Drill Stands
DS 160 C and DS 50 GYRO

V-groove roller carriage allows for accurate alignment that requires minimal adjustment.
Drill holes up to 6" (153mm) in diameter.
Maximum height of 32" allows drill stand to operate in confined spaces.
Combo base with vacuum pad is standard and eliminates the need for an additional vacuum base.
Self-draining leveling screws with feet allow for easy mounting on uneven surfaces.
Reversible feed handle can be placed on either side of carriage for increased operator flexibility.
Feed handle doubles as a wrench to adjust the leveling screws and angle adjustment bracket.
Adjustable column can be tilted up to 45° for angle drilling.
Standard 2 - 5/16" (60mm) mounting for hand-held core drills.
Lifting handle wheel kit comes standard for easy transportation.
2-year limited warranty on the stand.

Husqvarna - Target Core Drill Stand DS 6 C Specs
Roller Carriage	8" (203mm) long; cast aluminum roller carriage with rack and pinion feed; 6" (153mm) maximum bit capacity
Base	9-1/2" x 14 (241 x 356) lightweight aluminum; 4 leveling screws; slot for vacuum attachment; center pointer
Column	32" (813mm) long; anodized extruded aluminum V-groove profile column with tiltable 45° towards rear; 20" (508mm) usable carriage travel
DS 160 C Overall Dimensions	Length 20" (508mm), Width 9-1/2" (241mm), Height 32" (813mm)
Weight - lbs. (kg)	30 (14) uncrated, 40 (18) crated

Husqvarna - Target DS 160 C Core Drill Stand
965157001	DS 160 C Core Drill Stand	$552.50

LOW Standard Shipping via truck line on these quality Husqvarna Products!! - Truck shipments are to business addresses only, no residential deliveries. Questions? Please call for shipping details at (800) 347-5096.

Easy set-up design allows for mounting of the rig without anchors and quick motor disconnect.
Adjustable 360° rotating carriage allows for drilling horizontally or vertically at any angle or elevation from the same anchor point.
Carrying handles on carriage and rubber tires on chassis make transportation easy.
Core bit capacity of up to 14" and a core bit travel of up to 24"
Complete system includes base plate with transport wheels, expandable column, single gear carriage including quick disconnect, strut screw, ceiling pad and set of tools.

Husqvarna - Target Core Drill Stand DS 50 Gyro Specs
Ceiling Support (Extended)	125" (3175mm)
Ceiling Support (Retracted)	76" (1931mm)
Column Length	57" (1448mm)
Base Dimensions	12" x 8-3/4" x 1-1/2" (305mm x 223mm x 38mm)
Anchor Base Dimensions	8-1/2" x 7" x 1-1/2" (216mm x 178mm x 38mm)
Maximum Drill Bit Capacity	14" (356mm)
Weight - lbs. (kg)	141 (64) uncrated, 155 (70) crated

Husqvarna - Target DS 50 Gyro Core Drill Stand
965157810	DS 50 Gyro Core Drill Stand	$3717.00

LOW Standard Shipping via truck line on these quality Husqvarna Products!! - Truck shipments are to business addresses ONLY, no residential deliveries. Questions? Please call for shipping details at (800) 347-5096.

Husqvarna - Target Saw Blades

More Husqvarna - Target Tile Saws

Husqvarna - Target Main Index

SSL

Sales/Info 800-347-5096

4730 W. Spring Mountain Road, Las Vegas, Nevada 89102

FAX (702) 871-2815