|
|
|
High Capacity and Production Masonry Saw
Features of the Husqvarna - Target Guardmatic TS 510 Masonry Saw:
This saw proves its value daily on the job, and many of them have been on the job for over 25
years. If you need a production masonry saw you can count on year after year, the reliable
Husqvarna Guardmatic TS 510 is the saw for the job.
- Patented Sta-Level Blade Guard
- 2 Pivot Points
- An optional clutch enables the saw to idle without blade rotation.
- Four large engine isolators for maximum reduction of vibration
- Gas powered 9 hp or 13 hp Honda engine options.
- Dual capacitor increases power efficiency and reduces run amperage, making it an ideal machine
for low voltage conditions.
- Capable of cutting 8" x 8" x 16" block.
- Only two pivot points for reduced saw maintenance and longer diamond blade life.
- Cutting head pivots on bearings which are sealed and lubricated for life. No greasing
required.
- Height can be controlled with a convenient crank control on foot pedal.
- The Sta-level® blade guard keeps the blade guard parallel to the cutting table for
accurate cuts.
- The ergonomically designed steel handle with molded grip bolts securely into place.
|
| Electric Motors/Electric Engines |
Two Pivot Points |
| • |
The Guardmatic masonry saw comes with either a 3 HP, 5 HP or 7 1/2 HP electric motor or a
High-powered 9 or 13 HP Honda engine.
|
| • |
Electric motors operate on a run and start capacitor.
|
| • |
Dual capacitor increases power efficiency and reduces run amperage, making it an ideal machine
for low voltage conditions.
|
| • |
Capable of cutting 8" x 8" x 16" block. |
|
| • |
Only two pivot points for reduced saw maintenance and longer diamond blade life.
|
| • |
Cutting head pivot on bearings which are sealed and lubricated for life - no greasing
required!
|
| • |
Bearings are seated in a machined saddle, on a heavy-duty support, for precise alignment that
lasts.
|
|
| Quick-Mount Cutting Head |
Sta-Level Blade Guard |
| • |
Patented cutting head allows easy removal of the power head for transportation.
|
| • |
Solid lockdown knobs are hand operated; no tools required.
|
| • |
Bearing collar folds down, entire cutting head assembly can be lifted of easily.
|
| • |
Spring tension counter-balances the cutting head, making raising and lowering easy.
|
| • |
Height can be controlled with a convenient crank control and/or foot pedal. |
|
| • |
The Guardmatic masonry saw features the Sta-Level blade guard, which keeps the blade guard
parallel to the cutting table for accurate cuts.
|
| • |
The one-piece heavy-duty blade guard has a built-in OSHA required "lip" for operator
safety.
|
| • |
The ergonomically designed steel handle with molded grip bolts securely into place.
|
| • |
Spring tension counter-balances the cutting head, making raising and lowering easy.
|
| • |
Blade flanges are precision-machined for secure clamping of the blade. |
|
| Integrated Water System |
|
| • |
Easy on/off mechanical water pump provides consistent water delivery for maximum blade
protection (gas only).
|
| • |
The Guardmatic masonry saw is easy to clean and service.
|
| • |
Water flow valve is a solid brass fixture with brass water tubes built into either side of the
guard. |
|
|
|
| Guardmatic Specs |
GM1431 |
GM1451 |
GM2031 |
GM2051 |
GM2073 |
GM2090H |
GM2013H |
| Blade Guard Capacity |
14" (356mm) |
14" (356mm) |
20" (508mm) |
20" (508mm) |
20" (508mm) |
20" (508mm) |
20" (508mm) |
| Blade Shaft RPM |
3090 |
3090 |
2317 |
2317 |
2317 |
2202 |
2202 |
| Max. Depth of Cut |
5" (127mm) |
5" (127mm) |
8" (203mm) |
8" (203mm) |
8" (203mm) |
8" (203mm) |
8" (203mm) |
| Weight Crated |
360 lbs (161kg) |
361 lbs (162kg) |
360 lbs (161kg) |
361 lbs (162kg) |
395 lbs (177kg) |
395 lbs (177kg) |
395 lbs (177kg) |
| Weight Un-Crated |
332 lbs (149kg) |
333 lbs (149kg) |
332 lbs (149kg) |
333 lbs (149kg) |
368 lbs (165kg) |
368 lbs (165kg) |
368 lbs (165kg) |
| Power Source for Husqvarna - Target TS 510 Guardmatic Masonry
Saws: |
| Power Source |
Electric |
Electric |
Electric |
Electric |
Electric |
Gasoline |
Gasoline |
| Max. Horsepower |
3 |
5 |
3 |
5 |
7-1/2 |
9 |
13 |
| Motor / Engine |
Baldor |
Baldor |
Baldor |
Baldor |
Baldor |
Honda |
Honda |
| Specifications |
T.E.F.C. |
T.E.F.C. |
T.E.F.C. |
T.E.F.C. |
T.E.F.C. |
- |
- |
| Displacement |
- |
- |
- |
- |
- |
16.5 cu. in. (270L) |
23.7cu. in. (389L) |
| Bore |
- |
- |
- |
- |
- |
3.0" (77mm) |
3.5" (88mm) |
| Stroke |
- |
- |
- |
- |
- |
2.3" (58mm) |
2.5" (64mm) |
| Cylinders / Stroke |
- |
- |
- |
- |
- |
1/4 |
1/4 |
| Fuel Capacity |
- |
- |
- |
- |
- |
1.6 gal. (6L) |
1.7 gal. (1.1L) |
| Oil Capacity |
- |
- |
- |
- |
- |
2.3 qt. (1.1L) |
2.3 qt. (1.1L) |
| Air Filter |
- |
- |
- |
- |
- |
Dual Element Cyclone Filter
|
Dual Element Cyclone Filter |
| Starter |
Capacitor |
Capacitor |
Capacitor |
Capacitor |
Capacitor |
Recoil |
Recoil |
| Engine Cooling |
Air |
Air |
Air |
Air |
Air |
Air |
Air |
| Voltage |
208/230 |
208/230 |
208/230 |
208/230 |
230/460 |
- |
- |
| Full Load Amps |
14.5/13 |
21.5/20 |
27.2/14.5-13 |
21.5/20 |
19.4/9.7 |
- |
- |
| Starting Amps |
188/95 |
149/139 |
188/95 |
149/139 |
166/83 |
- |
- |
| Cycle/Current/Phase |
60/AC/1 |
60/AC/1 |
60/AC/1 |
60/AC/1 |
60/AC/3 |
- |
- |
| All Husqvarna - Target TS 510 Guardmatic Masonry Saws
feature: |
| Arbor Size |
1" (25.4mm) |
| Bladeshaft Bearings |
Ball bearings |
| Bladeshaft Drive |
2 V-belts |
2 V-belts |
2 V-belts |
2 V-belts |
3 V-belts |
3 V-belts |
3 V-belts |
| Blade Guard |
One-piece steel, Sta-Level |
| Conveyor Cart |
Cast aluminum; vulcanized rubber top; adjustable measuring rule;
45° / 90° cutting blade |
| Water Pump |
High output submersible; totally epoxy-sealed with built-in thermal
overload protection |
| Frame |
Heavy-duty, jig welded "X" braced steel; open throat
design; adjustable foot pedal head height control |
|
Husqvarna - Target 
View Cart
|
FAX Order |
Tell
a Friend | Contact Us 
